BEGA 50753.6 Indoor Floor Lamp Instruction Manual

BEGA 50753.6 Indoor Floor Lamp

Product Information

• Product Description: Innenfarbton kupfer matt Schlagfeste Kunststoffabdeckung, transluzent-Aluminium housing shield, Finish Colour velvet black inside hue matt copper Impact-resistant synthetic cover, translucent white Touch-controlled dimmer for infinite light adjustment
• LED Power Supply Unit: 220-240 V y 50-60 Hz
• Energy Efficiency Class: D
• Overvoltage Protection: The electronic components installed in the luminaire are protected against overvoltage in accordance withDIN EN 61547. It is recommended to use separate overvoltage protection components for additional protection.
• Lamp Specifications:
  • Module Connected Wattage: 40.6 W
  • Luminaire Connected Wattage: 45.5 W
  • Colour Temperature: 3000 K
  • Colour Rendering Index (CRI): > 90
  • Module Luminous Flux: 6640 lm
  • Luminaire Luminous Flux: 4071 lm
  • Luminaire Luminous Efficiency: 89.5 lm / W

Product Usage Instructions

1. Carefully remove the floor lamp from its packaging and set it up. Make sure that the luminaire is in a firm and secure position.
2. Connect the luminaire to a mains supply that has a Schutzkontaktsteckdose (230 V).
3. To turn the luminaire on or off, gently press the touch-controlled dimmer.
4. To adjust the light intensity, hold the touch-controlled dimmer and the brightness can be adjusted infinitely.
5. Avoid touching the light output opening of the LED directly during installation or relamping.

Instructions for use

Application
Floor lamp · indoor luminaire with impact-resistant synthetic diffuser and metal housing for shielded light, deflected upwards and downwards.

OVERVIEW

Product Description

• Floor lamp »STUDIO LINE«
• Metal housing, finish Colour velvet black Aluminium housing shield,
• Finish Colour velvet black inside hue matt copper
• Impact-resistant synthetic cover, translucent white
• Touch-controlled dimmer for infinite light adjustment
• Black cable · 2 m, with safety plug
• LED power supply unit
• 220-240 V 50-60 Hz
• BEGA Thermal Control®
• Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
• Safety class I
• Conformity mark
• Weight: 16.7 kg
• This product contains light sources of energy efficiency class(es) D

Safety

• The installation and operation of this luminaire are subject to national safety regulations.
• The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

• The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
• To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
• You can find them on our website at www.bega.com.

FEATURES

Lamp

• Module connected wattage 40.6 W
• Luminaire connected wattage 45.5 W
• Rated temperature ta = 25 °C
• Ambient temperature ta max = 55 °C

50 753.6 K3

• Module designation LED-0832/930
• Colour temperature 3000 K
• Colour rendering index CRI > 90
• Module luminous flux 6640 lm
• Luminaire luminous flux 4071 lm
• Luminaire luminous efficiency 89,5 lm / W

Installation

• LED are high-quality electronic components!
• Please avoid touching the light output opening of the LED directly during installation or relamping.
• Carefully remove the floor lamp from its packaging and set it up. Make sure that the luminaire is in a firm and secure position.
• Connect luminaire to mains supply (230 V).
• Press the sensing device gently to turn the luminaire on or off.
• Holding the sensing device enables to adjust the light intensity infinitely.

Cleaning Maintenance

• Clean the luminaire regularly with solvent-free cleansers from dirt.
• We recommend that you dry-clean the sensing device.

Replacing the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
• Disconnect the system and open the luminaire.
• Please follow the installation instructions for the LED module.
• Defective luminaire cover must be replaced.
• Close the luminaire

Spares

• Synthetic cover 15 000 633
• LED power supply unit DEV-0338/1050i
• LED module 3000 K LED-0832/930
• Shield 71 003 354 B28

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden
info@bega.com
www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>