PHILIPS BN126C CoreLine Batten Indoor luminaires Instruction Manual
- June 4, 2024
- Philips
Table of Contents
BN126C CoreLine Batten Indoor luminaires
Instruction Manual
BN126C CoreLine Batten Indoor luminaires
| Type Type | Energy efficiency class | P(W) | A (mm) | L(mm) | Kg |
|---|---|---|---|---|---|
| BN126C LED22S/840 PSU L600 | D | 17 | 497 | 600 | 0.62 |
| BN126C LED20S/830 PSU L600 | D | 17 | 497 | 600 | 0.62 |
| BN126C LED25S/840 PSU L1200 | D | 18 | 798 | 1135 | 1.01 |
| BN126C LED23S/830 PSU L1200 | D | 18 | 798 | 1135 | 1.01 |
| BN126C LED41S/840 PSU L1200 | D | 31 | 798 | 1135 | 1.01 |
| BN126C LED38S/830 PSU L1200 | D | 31 | 798 | 1135 | 1.01 |
| BN126C LED64S/840 PSU L1200 | D | 49 | 798 | 1135 | 1.01 |
| BN126C LED60S/830 PSU L1200 | D | 49 | 798 | 1135 | 1.01 |
| BN126C LED35S/840 PSU L1500 | D | 25.5 | 798 | 1450 | 1.27 |
| BN126C LED32S/830 PSU L1500 | D | 25.5 | 798 | 1450 | 1.27 |
| BN126C LED52S/840 PSU L1500 | D | 40 | 798 | 1450 | 1.27 |
| BN126C LED48S/830 PSU L1500 | D | 40 | 798 | 1450 | 1.27 |
| BN126C LED80S/840 PSU L1500 | D | 59 | 798 | 1450 | 1.27 |
| BN126C LED74S/830 PSU L1500 | D | 59 | 798 | 1450 | 1.27 |
| BN126C LED64S/840 PSU L1800 | D | 49 | 798 | 1750 | 1.53 |
| BN126C LED60S/830 PSU L1800 | D | 49 | 798 | 1750 | 1.53 |
| BN126C LED100S/840 PSU L1800 | D | 75 | 798 | 1750 | 1.53 |
| BN126C LED94S/830 PSU L1800 | D | 75 | 798 | 1750 | 1.53 |
-The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
– The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
– Luminaire must not be used or stored in a corrosive environment where
hazardous materials such as sulfur, chlorine, phthalates, etc, are present.
-This luminaire is not suitable for use as emergency lighting.
-Water entering into IP20 luminaire is strictly prohibited. IP20 luminaire is not protected against wet conditions, water ingress may cause electrical failure or unsafe conditions
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
2.1:Surface Mounted
2.2:Suspend Mounted
2.3:Mounted with BESA
Wiring from end hole
3.1: Wiring from back entry
TW Loop in – optional
Light-line creation – optional max. number of the connected luminaires (see
Inrush current table)
6. The power cord is not included in the luminaire
7. The end face of the first luminaire and the last luminaire
Inrush current
| L600| L1200| L1500| L1800
---|---|---|---|---
LED22S| LED25S| LED41S| LED64S| LED35S| LED52S| LED80S| LED64S| LED100S
LED20S| LED23S| LED38S| LED60S| LED32S| LED48S| LED74S| LED60S| LED94S
Electrical characteristics|
Inom (mA)| 78| 80| 140| 220| 115| 180| 260| 220| 330
Imax(A)| 8.3| 8.3| 11.6| 14.4| 10| 10.6| 15.7| 15.7| 17.6
Tref (Us)| 345| 332| 499| 579| 508| 527| 678| 648| 832
MCB| Luminaire Max
B-10A| 19| 19| 11| 8| 12| 11| 6| 6| 5
B-16 A| 25| 25| 13| 9| 16| 13| 8| 8| 7
C-10 A| 24| 24| 13| 10| 16| 14| 8| 8| 6
C-16 A| 38| 38| 22| 16| 25| 23| 14| 14| 11
Optional
Installation Mode…………Suspension
12NC…………………911401776802
Description……………BN126Z SC
EOC…………… 871016336574999
© 06/2022 Signify Holding.
All rights reserved. This document contains information relating to the
product portfolio of Signify which information may be subject to change. No
representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in
reliance thereon is disclaimed. The information presented in this document is
not intended as any commercial offer and does not form part of any quotation
or contract. Philips and the Philips Shield Emblem have registered trademarks
of Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding
or their respective owners.
Signify Holding.
The Netherlands