Newland HR15-BT SD Handheld Barcode Scanners User Guide
- June 15, 2024
- Newland
Table of Contents
Newland HR15-BT SD Handheld Barcode Scanners
Revision History
| Version | Description | Date |
|---|---|---|
| V1.0.0 | Initial release. | Jan 19, 2021 |
About Easy Connect
EasyConnect is a connection application developed by Newland Auto-ID Technology Co., Ltd. It can be directly installed on mobile phones, PDAs and other Android mobile devices. The bluetooth scanners can be directly connected to the mobile device by using this application and transmit the data to the Android devices in real time.
How to Use Easy Connect
-
Download EasyConnect installation package and run it after installation.
-
Allow EasyConnect to access this device’s location.
-
Scan the below barcodes to set the scanner in Bluetooth HID mode and clear pairing info on scanner.
Enter Setup
Clear Pairing Information of Scanner
Bluetooth HID Mode
Exit Setup
- Scan the pairing barcode on the EasyConnect and then connection completed
Once a scanner and an Android device is paired, no repairing is required unless the pairing information is cleaned.
Supported Products
Supported products are listed as below
- HR15-BT (Firmware version HR15-BT_V1.01.016 or later is required)
- HR22-BT (Firmware version HR22-BT_V1.01.006 or later is required)
- HR32-BT (Firmware version HR32-BT_V1.01.021 or later is required)
- HR52-BT (Firmware version HR32-BT_V1.01.003 or later is required)
Supported Operating System of Host
Android 6 later is required.
Customer Support
Newland EMEA
+ 31 (0) 345 87 00 33
info@newland-id.com
Need more info?
Contact us or one of our partners at newland-id.com/contact
Rolweg 25
4104 AV Culemborg
The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>