Sea Gull Lighting 7605401-115 Malone One Light Flush Mount Instruction Manual
- October 30, 2023
- Sea Gull Lighting
Table of Contents
Installation Instructions for
Malone Flush Mount
MALONE_FLUSH
1.0 7505401, 7605401, 7705401
GENERAL RODUCT NFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
This instruction shows a typical installation.
CAUTION RISK OF FIRE
-This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!
Install the Fixture
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the fixture base onto the mounting studs, and secure it in place using the fixture screws.
- Place the shade and diffuser onto the socket, then secure them in place by screwing the collar nut onto the socket.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort &
Co. logo is a registered trademark of Visual Comfort & Co.
Visual Comfort & Co. reserves the right to change specifications for product
improvements without notification.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>