Sea Gull Lighting Dex Wall Series Sconce and Vanity Light Instruction Manual
- October 30, 2023
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting Dex Wall Series Sconce and Vanity Light
GENERAL PRODUCT INFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
This instruction shows a typical installation.
CAUTION RISK OF FIRE –
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!
Install the Fixture
- Secure the mounting plate to the junction box or wall.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire to the neutral power line wire with a wire nut.
- Connect the black fixture wire to the hot power line wire with a wire nut.
- Neatly place the wires into the junction box, place the fixture onto the mounting plate, and secure it with the fixture screws.
- Place the diffuser on the bracket studs, align the studs with the holes on the fixture, insert the studs through the fixture, Nand secure them together by screwing the cap nuts onto the studs from behind.
- Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.
CUSTOMER SERVICES
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort &
Co. logo is a registered trademark of Visual Comfort & Co.
Visual Comfort & Co. reserves the right to change specifications for product
improvements without notification.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>