Sea Gull Lighting 4109301 Foxdale Wall Instruction Manual
- October 30, 2023
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 4109301 Foxdale Wall
General Product Information
These fixtures are intended to be installed utilizing NEC-compliant junction boxes. This product is safety listed for damp locations. Incandescent version may be dimmed with a standard incandescent dimmer. LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information. This instruction shows a typical installation. CAUTION – RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
SAVE THESE INSTRUCTIONS
7400 Linder Ave., Skokie, IL 60077 T 847.410.4400 | F 847.410.4500 www.generationlighting.com.
Install the Fixture
- Remove the two fixture screws and separate the mounting plate from the fixture.
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire to the neutral power line wire with a wire nut.
- Connect the black fixture wire to the hot power line wire with a wire nut.
- Neatly place the wires into the junction box, place the fixture onto the mounting plate, and secure it in place with the fixture screws.
- Place the candle tube over the socket, followed by the shades.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Product Usage Instructions
- Make sure to install the fixture using NEC compliant junction boxes and in accordance with local electrical codes.
- The product is safety listed for damp locations.
- If you are using the incandescent version, it may be dimmed with a standard incandescent dimmer. If you are using the LED version, it may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
- Follow the step-by-step installation instructions provided in the user manual to install the fixture.
- After installing the fixture, place the candle tube over the socket, followed by the shades.
- Screw the lamp into the socket, ensuring that you refer to the label on the socket for Max Wattage Information.
- Enjoy using your Foxdale Wall fixture!
GENERAL PRODUCT INFORMATION
- These fixtures are intended to be installed utilizing NEC compliant junction boxes.
- This product is safety listed for damp locations.
- Incandescent version may be dimmed with a standard incandescent dimmer.
- LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
- This instruction shows a typical installation.
OVERVIEW
Install the Fixture
- Remove the two fixture screws and separate the mounting plate from the fixture.
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire to the neutral power line wire with a wire nut.
- Connect the black fixture wire to the hot power line wire with a wire nut.
- Neatly place the wires into the junction box, place the fixture onto the mounting plate, and secure it in place with the fixture screws.
- Place the candle tube over the socket, followed by the shades.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved. Use minimum 90°c supply conductors.
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort &
Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort &
Co. reserves the right to change specifications for product improvements
without notification.
- 7400 Linder Ave.
- Skokie, IL 60077
- T 847.410.4400
- F 847.410.4500
- www.generationlighting.com.