Sea Gull Lighting 4461604-848 Clybourn Wall Sconce Installation Guide
- October 30, 2023
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 4461604-848 Clybourn Wall Sconce
Product Information
The Clybourn Wall is a fixture that is designed to be installed using NEC compliant junction boxes. It is safety listed for damp locations, making it suitable for use in areas with high humidity or moisture. The installation instructions provided are for typical installation, and it is important to follow them to ensure the safety of the product. The product comes with a mounting plate, shade, lamp socket, and cap nuts.
Product Usage Instructions
- Secure the mounting plate to the junction box or wall.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire to the neutral power line wire with a wire nut.
- Connect the black fixture wire to the hot power line wire with a wire nut.
- Neatly place the wires into the junction box, place the fixture onto the mounting studs, and secure it in place by screwing the cap nuts onto the studs.
- Install the lamp(s) by inserting them completely into the socket holes. Refer to the label on the socket for Max Wattage Information.
- Screw the shade onto the socket threads. Repeat for remaining shades.
Note : It is important to follow the instructions carefully and ensure that the fixture is installed by a person familiar with the construction and operation of the product and the hazards involved. Also, make sure to save these instructions for future reference.
GENERAL PRODUCT INFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. This instruction shows a typical installation
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved. Use minimum 90°c supply conductors. SAVE THESE
INSTRUCTIONS
Install the Fixture
- Secure the mounting plate to the junction box or wall.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire to the neutral power line wire with a wire nut.
- Connect the black fixture wire to the hot power line wire with a wire nut.
- Neatly place the wires into the junction box, place the fixture onto the mounting studs, and secure it in place by screwing
- the cap nuts onto the studs.
- Install the lamp(s) by inserting them completely into the socket holes. Refer to the label on the socket for Max Wattage Information.
- Screw the shade onto the socket threads. Repeat for remaining shades
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.
GENERATION LIGHTING 7400 Linder Ave., Skokie, IL 60077
- T 847.410.4400
- F 847.410.4500
- www.generationlighting.com