Sea Gull Lighting 8531101-71 Vado Outdoor Wall Lantern Sconce Instructions
- October 30, 2023
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 8531101-71 Vado Outdoor Wall Lantern Sconce
Product Information
The Vado Wall Outdoor fixtures are intended to be installed using NEC- compliant junction boxes. These fixtures are safety listed for wet locations. Please follow the instructions carefully to ensure proper installation.
Usage Instructions:
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the fixture base onto the mounting studs, and secure it in place with the cap nuts.
- Place the shade onto the socket and secure it in place by screwing the collar nut onto the socket.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
- Caulk around the base of the fixture with waterproof construction sealant.
CAUTION: Risk of fire. This product must be installed in accordance with
the applicable installation code by a person familiar with the construction
and operation of the product and the hazards involved. Save these instructions
for future reference.
If you have any questions or concerns about the installation or usage of this
product, please contact our customer service team at 847.410.4400 or visit our
website at www.generationlighting.com.
GENERAL PRODUCT INFORMATION
- These fixtures are intended to be installed utilizing NEC compliant junction boxes.
- This product is safety listed for wet locations.
- This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!
Install the Fixture
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the fixture base onto the mounting studs and secure it in place with the cap nuts.
- Place the shade onto the socket and secure it in place by screwing the collar nut onto the socket.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
- Caulk around the base of the fixture with waterproof construction sealant.
©2023 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort &
Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort &
Co. reserves the right to change specifications for product improvements
without notification
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com