Shark IQ Robot Vacuum R100 with Wi-Fi and Home Mapping User Guide
- June 6, 2024
- Shark
Table of Contents
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your robot.
QUICK START GUIDE
To stay current on our latest updates and features,
DOWNLOAD THE SHARKCLEAN™APP.
Search “SharkClean” in the app store.
Scan QR code with your phone’s camera to quickly find and download the app
WHAT TO EXPECT
As your robot learns your home, you may need to make some small adjustments to optimize performance.
|
---|---
For a constant state of clean™, set up a cleaning schedule in the app.|
While your robot is cleaning, do not pick it up and move it, or move the charging dock—this will impact the robot’s ability to map your home.
|
During the first few weeks of use, the dust bin will need to be emptied
frequently. Empty debris and dust into trash.
Remove any debris buildup between the filter and the plastic shield.| For best
results, run your robot in well-lit conditions. If you run your robot at
night, keep the lights on in the areas to be cleaned.
Your robot can easily climb over most thresholds, but if one is higher than
7/8ths of an inch, block it off with a BotBoundary® strip.
SETUP
|
---|---
• Remove protective film from robot and dock.
• Attach the side brushes to the posts on the bottom of the robot. The side
brushes are located in the red packaging.
• Turn on the power by pressing the button on the side of the robot to the
(I) ON position.|
Find a permanent location for the dock in a central area with a strong Wi- Fi signal. Remove any objects that are closer than 3 ft. from either side of the dock, or closer than 5 ft. from the front. Place the dock with its back against the wall, and connect the charging cord to the back. The Indicator Light will illuminate green when the dock has power.
|
Place robot on dock to charge for 6 hours. Power button must be in the (I) ON position and the robot must be aligned correctly, with its FRONT side against the dock. When charging begins, the robot will BEEP and the DOCK light will turn BLUE.
|
BotBoundary® strips Search “SharkClean” in the app store or scan the QR code
and download.
NOTE: For more information on connecting your robot, see next page.
OPTIMIZING YOUR HOME FOR CLEANING
|
---|---
Clear cords and remove small objects like toys, clothing, or drapes from
floors. Open interior doors in rooms you want your robot to clean.| Use the
BotBoundary® strip included in the box to keep your robot out of the areas you
would like it to avoid:
• Near power cords or phone chargers.
• In front of thresholds higher than 7/8ths of an inch.
CONNECTING THE SHARKCLEAN™ APP AND ROBOT
Search SharkClean in the app store and download to get started.
Apple iOS Only
STEP 1
Create An Account
|
STEP 2
Activate Robot Wi-Fi
|
STEP 3
Select Robot
---|---|---
• Open the SharkClean app and set up your account.| • Hold down Dock and
Clean buttons simultaneously until the Wi-Fi light ( ) on the robot blinks.| •
Exit the app and open Wi-Fi settings.
• Select your robot (Ex. Shark_RVXXX) from the menu.
• Exit settings and return to the SharkClean app.
| | ![Shark IQ Robot Vacuum R100 with Wi-Fi and Home Mapping
- STEP 3](https://manuals.plus/wp-content/uploads/2021/10/Shark-IQ-Robot- Vacuum-R100-with-Wi-Fi-and-Home-Mapping-STEP-3.jpg)
STEP 4
Connect To Home Wi-Fi
| STEP 5
Success!|
Questions?
• Select your home Wi-Fi network and enter your password.
NOTE: Most networks are 2.4GHz. The app will not work on a 5GHz network.!
| • When pairing is complete, the
Success screen will appear.
| Two Easy Steps If You’re Stuck:
Having trouble connecting to your robot? Call
1-888-228-5531 for robot support.
For additional help, visit:
sharkclean.com/support
• How-to Videos
• FAQs
• Troubleshooting
• Tips & Tricks
Smart Home Setup
To set up voice control using Google Home or Amazon Alexa, visit
sharkclean.com/app for instructions.
HAVING TROUBLE CONNECTING TO YOUR ROBOT?
Restart your phone
Reboot your robot
• Press the power button on the side of the robot to the (O) OFF position.
Wait 10 seconds, then press it to the (I) ON position.
Reboot your router
• Unplug the router power cable for 30 seconds, then plug it back in. Allow
several minutes for your router to reboot completely.
© 2020 SharkNinja Operating LLC. BOTBOUNDARY, SHARK, and SHARK IQ ROBOT are
registered trademarks of SharkNinja Operating
LLC. CONSTANT STATE OF CLEAN and SHARKCLEAN are trademarks of SharkNinja
Operating LLC. APPLE, the Apple logo, and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. APP STORE is a service mark of
Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE
ASSISTANT, GOOGLE
PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.
AV970_QSG_E_MP_Mv3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>