Sea Gull Lighting 5140603 3-Light Black Hall-Foyer Hanging Pendant Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 5140603 3-Light Black Hall-Foyer Hanging Pendant
Instruction Manual
ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junction NEC boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent dimmer. LED
LED version may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
CAUTION RISK OF FIRE –
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
If you need installation assistance, replacement parts, or have questions regarding our warranty, please call our customer care center:
To register your fixture, please visit our website:
www.SeaGullLighting.com
SAVETHESE INSTRUCTIONS!
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under normal conditions of use, are warranted to be free from defects in materials and workmanship for one year from date of sale. light sources are warranted for five years. ® labeled products are warranted for thre LED ENERGY STAR e years. Sea Gull Lighting at its sole option will repair or replace, F.O.B. Factory, freight prepaid, any Sea Gull Lighting product defective in materials or workmanship. Such replacement is the exclusive remedy against Sea Gull Lighting should any of the products delivered prove defective. Invoices for labor charges and/or charge backs for labor will be denied unless prior written approval is given.
Any modification to a Sea Gull Lighting product not made at the factory will void the or listing as well as the Sea Gull Lighting UL ETL warranty policy.
To register your fixture, please visit our website: SeaGullLighting.com
Install the Fixture
- If necessary, screw the shorter end of the threaded nipple tightly onto the mounting plate and the screw collar onto the threaded nipple.
- Secure the mounting plate to the junction box.
- Feed the cord from the socket assembly through the fixture frame stem then screw them together.
- Feed the cord through the fixture loop assembly and screw it onto the fixture frame stem.
- Install the fixture frame arms onto the frame and fixture loop assembly and secure them in place with the provided thumb screws.
- Determine the wanted height of the fixture and remove a portion of the chain by opening a link with pliers.
- Open the chain link with pliers and install the chain on the fixture loop, then re close the chain link.
- Unscrew the collar nut from the screw collar, install the collar nut and the canopy onto the chain (in that order).
- Open a link on the other end of the chain with pliers and install the chain onto the screw collar to secure the fixture, re-close the link.
- Weave the cord through the chain, canopy, collar nut, screw collar, threaded nipple, and out of the junction box. Trim the cord leaving enough to make electrical connections.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the canopy onto the ceiling, and secure it in place by screwing the collar nut tightly onto the screw collar.
- Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
7400 Linder Ave, Skokie, 60077 IL
800.323.3226 – 847.626.6300
www.SeaGullLighting.com
© 2017 Sea Gull Lighting.All rights reserved.The “Sea Gull Lighting” graphic
is a registered trademark of Sea Gull Lighting. Sea Gull Lighting reserves the
right to change specifications for product improvements without notification.
A Generation Brands Company