Pink Power PP203 20 Volt Lithium Ion Drill Kit Instruction Manual
- June 17, 2024
- Pink Power
Table of Contents
POWERFUL TOOLS FOR POWERFUL WOMEN
20-VOLT LITHIUM-ION DRILL KIT
PP203 20 Volt Lithium Ion Drill Kit
PP203
Thank you for your purchase!
Ever since we started back in 2011, our mission has been to give YOU the
confidence to tackle something new. Whether you’re building a deck or just
hanging a picture, we’ll be there along the way. We stand behind every
product, which is why they come with a full 3-year warranty. Our contact
information is listed below and you can reach out to us any time. From the
entire Pink Power family, we wish you all the best on your next project!
Thank you!
Need to get in touch?
Register Your Warranty and sign up for free coupons:
Pinkpowerdrill.com/warranty
Questions?
Call or Text Us: 813.304.2224
Email Us:
customerservice@pinkpowerdrill.com
Love your items so much that you want to be a Brand Ambassador?
Join the Pink Power Army by sending your request to:
affiliate@pinkpowerdrill.com
FEATURES:
- Keyless Chuck
- 19+1 Torque Selector
- 2-Speed Selector
- Forward/Reverse Switch
- ON/OFF Trigger
- Battery Pack
- LED Light
- Belt Clip
OPERATING INSTRUCTIONS
CHARGING THE BATTERY PACK
Your drill comes with a fast charger. The battery pack for this tool has been
shipped in a low charge condition to extend battery life. Remove your charger
and plug it into a power source. A red light on the charger will illuminate.
Place the battery in the charger and a green light will flash. Do not charge
batteries in extreme heat or cold. Make sure to fully charge and discharge the
batteries on the first few uses to help the battery reach full charge. Please
reference the table on the next page for battery charge status. (See Table 1)
INSERTING AND REMOVING THE BATTERY
Before placing the battery in the drill, make sure the Switch Lock is in the
center position. This keeps the drill in the locked stage. Slide the battery
into the front of the drill until you hear a “Click” noise. To remove the
battery, press the button on the front of the battery down and pull forward.
This will release the battery.
SWITCH LOCK & ON/OFF TRIGGER
The Switch Lock comes with 3 positions. When holding the drill away from you,
push the Switch Lock all the way to the left – your drill is now ready to use
in the forward position. Push the switch lock all the way to the right and
your drill is now in the reverse position (used to remove screws). To lock
your drill, push the switch to the center position. To use your drill, just
pull the Trigger. Your Trigger is pressure sensitive so the more pressure you
apply, the faster your drill will spin.
INSERTING & REMOVING DRILL BITS
Make sure the Switch Lock is in the locked state (center position). Face the
front of the drill toward you and twist the Keyless Chuck counter-clockwise to
loosen the chuck and clockwise to tighten the chuck. Your drill bit will be
inserted between the 3 teeth at the end of the chuck.
TORQUE & SPEED ADJUSTMENT
To adjust the torque, hold and twist the Torque Setting located directly
behind the Keyless Chuck. Your drill comes with 19 torque settings and 1
setting for drilling holes. Since Torque is what gives the drill power, we
recommend starting with a lower setting and adjusting as needed. Use the lower
settings for softer materials like drywall and use the higher settings for
harder materials like cement or wood. When using the drill to drill a hole,
use the last setting (shaped like a drill bit). When you first begin using
your drill, we recommend keeping the speed setting at one. This allows you to
control the drill easier and will work great for precision projects. To change
the speed, just push the Speed Selector on top of your drill forward or
backward.
BATTERY GAUGE
Your battery includes a power gauge on the back of the unit. To check the
power of your battery, press the button on the back of the unit. Below is a
table showing the power level of your battery. When your LED is flashing, it
is time to charge your battery. (See Table 2)
OTHER USES
Your drill comes with an LED light that will automatically turn on when the
trigger is pulled. This helps when working in dim areas such as a closet or
cabinet. Your drill also includes a Belt Clip that can be used to secure your
drill and keep your hands free. Your Belt Clip can be attached to the left or
right side of your drill.
Prefer video tips instead? Go to
Pinkpowerdrill.com/Videos
TOOL SAFETY:
SAFETY
Do not use power tools under the influence of medication, drugs, or alcohol
as this could result in serious injury. Keep hair, clothing, jewelry, and
other loose objects away from moving parts. Use the proper safety equipment
when operating power tools.
Never modify your tools as this could increase the risk of electric shock or
malfunction. Make sure to always ensure proper balance when using power tools.
If your tool is damaged stop use immediately.
WORKING AREA
Keep your working area clean and well lit. Cluttered and dark areas can
lead to accidents. Do not operate power tools in explosive atmospheres such as
in the presence of flammable liquids, gases, or dust. Power tools create
sparks which may ignite fumes and dust.
CLEANING & MAINTENANCE
Always remove the battery before cleaning. Remove dust and dirt with a
slightly damp cloth. Ensure that no water gets into the inner parts of your
tools, battery, and charger. Your tool is permanently lubricated and does not
require oil.
BATTERY USE & CARE
Only use the PP205 charger to charge your battery. Using the incorrect
charger could result in injury or damage to your battery. Do not leave the
battery and charger unattended when charging. Once the battery is fully
charged, remove it from the charger. Abuse of the tool can lead to battery
leakage. Avoid contact with battery fluid. If contact occurs, seek medical
help immediately. Never attempt to open the battery for any reason. Do not
expose your battery to rain or wet conditions. Do not store your battery in
temperatures below 39°F or above 70°F.
TECHNICAL DATA:
Battery: 20-Volt Lithium-ion
Battery capacity: 1.5Ah
No-load speed (RPM): 0-350 / 0-1350
Chuck capacity: 10 mm
Torque settings: 19+1
Torque rating: 225 in-LBs
Charge time: <1 hour
Weight (drill and battery): 2.8lbs
TABLE 1
| | Charger has power
---|---|---
| | Battery is charging
| | Battery is fully charged
| | Charging fault
| | Charger is outside operating temperature
TABLE 2
Indicator lamps | Remaining capacity |
---|---|
Lighted | Off |
75% to 100% | |
50% to 75% | |
25% to 50% | |
0% to 25% | |
Charge thebattery. |
Follow us for discounts and fun!
@shoppinkpower
pinkpowerdrill.com/blog
Documents / Resources
| Pink
Power PP203 20 Volt Lithium Ion Drill
Kit
[pdf] Instruction Manual
PP203 20 Volt Lithium Ion Drill Kit, PP203, 20 Volt Lithium Ion Drill Kit,
Lithium Ion Drill Kit, Ion Drill Kit, Drill Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>