Sea Gull Lighting 78027 Hunnington Outdoor Ceiling Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 78027 Hunnington Outdoor Ceiling
PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC-compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent dimmer. LED
version may be dimmed with a LED dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors.
NEED HELP?
If you need installation assistance, replacement parts, or have questions
regarding our warranty, please call our customer care center:
To register your fixture, please visit our website: www.SeaGullLighting.com
SAVE THESE INSTRUCTIONS!
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under
normal conditions of use, are warranted to be free from defects in materials
and workmanship for one year from date of sale. LED light sources are
warranted for five years. ENERGY STAR® labeled products are warranted for
three years. Sea Gull Lighting at its sole option will repair or replace,
F.O.B. Factory, freight prepaid, any Sea Gull Lighting product defective in
materials or workmanship. Such replacement is the exclusive remedy against Sea
Gull Lighting should any of the products delivered prove defective. Invoices
for labor charges and/or charge backs for labor will be denied unless prior
written approval is given.
Any modification to a Sea Gull Lighting product not made at the factory will
void the UL or ETL listing as well as the Sea Gull Lighting warranty policy.
To register your fixture, please visit our website:
SeaGullLighting.com
Install the Fixture
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Mount the fixture base onto the mounting plate studs and secure it with the two thumb nuts.
- Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
- Place the shade onto the base and secure it in place with the shade screws.
7400 Linder Ave, Skokie, IL 60077 800.323.3226 – 847.626.6300 www.SeaGullLighting.com
© 2017 Sea Gull Lighting.All rights reserved.The “Sea Gull Lighting” graphic is a registered trademark of Sea Gull Lighting. Sea Gull Lighting reserves the right to change specifications for product improvements without notification. A Generation Brands Company