Sea Gull Lighting 3161606-848 Clybourn Chandelier Installation Guide
- October 30, 2023
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 3161606-848 Clybourn Chandelier
GENERAL PRODUCT INFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. This instruction shows a typical installation
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved. Use minimum 90°c supply conductors. SAVE THESE
INSTRUCTIONS!
Install the Fixture
- Screw the half ball to the stem which will be on top.
- Determine the wanted height or look of the fixture with the provided stems, then assemble them by screwing them together.
- Feed the fixture wires through the stem assembly, then screw the stem assembly on top of the fixture.
- Feed the fixture wires through the collar nut, canopy, and the half ball assembly, then screw it onto the stem assembly.
- Align and secure the mounting plate to the junction box, then slide the half ball assembly onto the mounting plate.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the canopy onto the mounting plate, and secure it in place by screwing the collar nut tightly onto the mounting plate.
- Install the lamps by inserting them completely into the socket holes. Refer to the label on the socket for Max Wattage Information.
- Screw the shade onto the socket threads. Repeat for remaining shades.
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification
GENERATION LIGHTING 7400 Linder Ave., Skokie, IL 60077
- T 847.410.4400
- F 847.410.4500
- www.generationlighting.com