GUBI 9205 Table Lamp Instruction Manual
- June 13, 2024
- GUBI
Table of Contents
GUBI 9205 Table Lamp
CONTENTS.
Installation.
Remove brass disc from top of lamp.
Attachment.
- Insert Type A bulbs in sockets.
- Place shade on top of stem (a), and attach brass disc on top for closure (b).
- Tighten brass disc clockwise until properly fastened.
CARE INSTRUCTIONS
Wipe the parts with a damp cloth soaked in warm water and a bit of mild detergent. Use only soft cloth for wiping and polishing, never sponges or steel wool. Do not use abrasive household cleaners. Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia.
TROUBLESHOOTING
If lamp does not light, turn off the power. Check the bulb for a broken filament. Replace bulb if necessary, then turn it on. If the lamp still does not light, please contact customer service at the local dealer. If the external flexible cable or cord of this lamp is damaged, it must be replaced by a qualified electrician in order to avoid a hazard.
TECHNICAL INFORMATION
Light sources: 2 X E27, Max. 6W LED, 470 Lumen. Turn power off when changing light bulb. Isolation class II. The lamp is not approved for outdoor use or use in damp/wet rooms (IP20).
CUSTOMER SUPPORT
For enquiries contact GUBI A/S – CVR: 17940384
Orientkaj 18-20. 2150 Nordhavn. Copenhagen, Denmark
T +45 69 15 60 60 – order@gubi.dk
GUBI.COM
159-20-003-01 9205_TablelampAssemblyInstructions EU.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>