Hukoro F51401-11i Mousse 1-Light Cage Mini Pendant Light Instruction Manual

Hukoro F51401-11i Mousse 1-Light Cage Mini Pendant Light

Product Information

The product is a light fixture that requires assembly and installation. The package includes various hardware parts such as fixture, stems, canopy, mounting unit, ball nuts, mounting screws, wire nuts, and exploded parts. The product requires some tools for assembly such as a ladder, safety glasses, electrical Phillips screwdriver, flat blade screwdriver, pliers, and wire strippers. The product does not include bulbs or sealing tape.

Product Usage Instructions

Follow the below instructions to assemble and install the light fixture:

Step 1: Mounting Unit Installation

1. Unscrew the ball nuts from the mounting unit.
2. Use the mounting screws to attach the mounting unit to the junction box.

Step 2: Stems and Canopy Installation

1. Install stems based on the desired length of the item.
2. Add the canopy once finished.
3. Secure the canopy to the mounting unit with the ball nuts.

Step 3: Electrical Connection

1. Make the electrical connection from the junction box to the fixture.
2. Connect the ground wire to the mounting unit using the preinstalled green ground screw.
3. Connect the positive, negative, and ground wires with the supplied wire nuts.
4. Secure with electrical tape.

The following wires should be connected:

• Black or Red wire (hot) from the junction box
• White wire (neutral) from the junction box
• The bare or Green ground wire from the junction box
• Black wire from the fixture
• White wire from the fixture
• The ground wire from the Fixture

Note: Sealing tape is not included.

Step 4: Bulb Installation

1. Install bulb (not included).

After following the above steps, the light fixture should be ready for use.

ASSEMBLY INSTRUCTIONS

CAUTION

• Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
• Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

TOOLS REQUIRED

HARDWARE INCLUDED

PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

EXPLODED PARTS

INSTALLATION

STEP 1
Unscrew the ball nuts from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box.

STEP 2
Install stems based on the desired length of the item, adding a canopy once finished.

ASSEMBLY INSTRUCTIONS (INSTALLATION)

STEP 3

Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.

STEP 4

Secure the canopy to the mounting unit with the ball nuts.

STEP 5

Install bulb (not included)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>