Hukoro F70931-FM-BN-16 Hanz 16 Inch Brushed Nickel Selectable LED Flush Mount Ceiling Light Instruction Manual
- October 30, 2023
- Hukoro
Table of Contents
Hukoro F70931-FM-BN-16 Hanz 16 Inch Brushed Nickel Selectable LED Flush
Mount Ceiling Light
Product Information
The product is a light fixture that requires assembly and installation. It comes with a shade, decorative circle, mounting unit, and hardware for installation. The product requires tools such as a ladder, safety glasses, electrical screwdriver, Phillips screwdriver, flat blade screwdriver, pliers, and wire strippers. The product also includes wire nuts and mounting screws. The product requires an electrical connection to a junction box (not included). The product has the option to select the color temperature.
Product Usage Instructions
- Before installation, ensure safety by wearing safety glasses and using a ladder for higher installation.
- Disassemble the decorative circle and shade under the fixture by unscrewing ball nuts A.
- Make sure the threaded rod on the mounting unit is adjusted for the fixture to rest flush against the ceiling when the ball nut is tightened.
- Attach the mounting unit to the junction box (not included) using the mounting screws.
- Make the electrical connection from the junction box (not included) to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Next, connect the positive, negative, and ground wires with the supplied wire nuts. Secure with electrical tape.
- Select the desired color temperature.
- Attach the shade and decorative circle to the fixture using ball nuts A.
- After installation, turn on the power and test the light.
Note : If you need further assistance, please contact us by email at customersupport@superiordecorinc.com. Also, be cautious when removing the fuse at the fuse box.
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
- STEP 1
- Unscrew the washer and ball nut from the mounting unit.
- Adjust threaded rod on mounting unit to allow fixture to rest flush against the ceilin when ball nut is tightened.
- Use the mounting screws to attach the mounting unit to the junction box (not included).
- STEP 2 Disassemble the decorative circle and shade under the fixture by unscrewing ball nuts A.
- STEP 3 Make the electrical connection from the junction box (not included) to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Next, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
- STEP 4 Secure the fixture to the mounting unit with the washer and ball nut
- STEP 5 Select the color temperature you need.
- STEP 6 Use the ball nuts A to attach the shade and decorative circle to the fixture
If you need further assistance, please contact us by Email: customersupport@superiordecorinc.com