Hukoro F14501-BK 1 Light 16 In Matte Black Outdoor Wall Light Instruction Manual
- October 30, 2023
- Hukoro
Table of Contents
F14501-BK 1 Light 16 In Matte Black Outdoor Wall Light
Instruction Manual
ASSEMBLY INSTRUCTIONS
◆ Inspect the wire insulation for any cuts, abrasions, or exposed copper that
may have resulted during shipping. If there is a defect in the wire, do not
attempt installation.
◆ Before starting installation of this fixture or removal of a previous fixture,
disconnect the power by turning off the circuit breaker or by removing the fuse
at the fuse box.
If you need further assistance, please contact us by Email: customersupport@superiordecorinc.com
TOOLS REQUIRED
HARDWARE INCLUDED
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
Unscrew the rubber rings and decorative nuts from the mounting unit.
Use the mounting screws to attach the mounting unit to the junction box (not
included).
STEP 2
Make the electrical connection from the junction box (not included) to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 3
Attach the fixture to the mounting unit through screw holes as shown, and
secure it with rubber rings and decorative nuts.
NOTICE: Please use caulk in the back plate and wall mounting surface to
prevent water from entering.
STEP 4
Install bulb (not included)