Hukoro F74921-FM-BN-13 Modern Integrated LED Flush Mount Instruction Manual
- October 30, 2023
- Hukoro
Table of Contents
Hukoro F74921-FM-BN-13 Modern Integrated LED Flush Mount
Product Information
Superior Decor Inc. Light Fixture
The Superior Decor Inc. Light Fixture is a beautiful and elegant lighting
solution for your home or office. It comes with a fixture, shade, decorative
circle, ball nuts A and B, washer, mounting unit, mounting screws, wire nuts,
and hardware. Please note that the parts shown in the manual may differ
slightly per light fixture.
The installation requires a ladder, safety glasses, an electrical Phillips
screwdriver, flat blade screwdriver, pliers, and wire strippers.
Tools Required:
- Ladder
- Safety glasses
- Electrical Phillips screwdriver
- Flat blade screwdriver
- Pliers
- Wire strippers
Hardware Included:
- Fixture
- Shade
- Decorative Circle
- Ball Nuts A
- Ball Nuts B
- Washer
- Mounting Unit
- Mounting Screws
- Wire Nuts
Product Usage Instructions
- Before starting the installation, make sure to turn off the power to the junction box by removing the fuse at the fuse box.
- Use a ladder to reach the junction box and disassemble the decorative circle and shade under the fixture by unscrewing ball nuts A.
- Make the electrical connection from the junction box (not included) to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Next, connect the positive, negative, and ground wires with the supplied wire nuts. Secure with electrical tape.
- Black or Red wire (hot) from the junction box
- White wire (neutral) from the junction box
- The bare or Green ground wire from the junction box
- Black wire from the fixture
- White wire from the fixture
- The ground wire from the Fixture
- Secure the fixture to the mounting unit with the washer and ball nut.
- Select the color temperature you need.
- Use ball nuts A to attach the shade and decorative circle to the fixture.
- If you need further assistance, please contact Superior Decor Inc. at customersupport@superiordecorinc.com.
Caution: Make sure to turn off the power to the junction box before starting the installation. Sealing tape is not included in the package.
ASSEMBLY INSTRUCTIONS
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
- If you need further assistance, please contact us by Email: customersupport@superiordecorinc.com
TOOLS REQUIRED
HARDWARE INCLUDED
PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
- Unscrew the washer and ball nut from the mounting unit.
- Adjust threaded rod on mounting unit to allow fixture to rest flush against the ceilin when ball nut is tightened.
- Use the mounting screws to attach the mounting unit to the junction box (not included).
STEP 2
- Disassemble the decorative circle and shade under the fixture by unscrewing ball nuts A.
STEP 3
- Make the electrical connection from the junction box (not included) to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Next, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
STEP 4
- Secure the fixture to the mounting unit with the washer and ball nut.
STEP 5
- Select the color temperature you need.
STEP 6
- Use the ball nuts A to attach the shade and decorative circle to the fixture.
- customersupport@superiordecorinc.com
Documents / Resources
|
Hukoro F74921-FM-BN-13 Modern Integrated LED Flush
Mount
[pdf] Instruction Manual
F74921-FM-BN-13, F74901-FM-BK-10, 2F74921-FM-BN-13, 2F74921-FM-BK-13, F74921
-FM-BN-13 Modern Integrated LED Flush Mount, Modern Integrated LED Flush
Mount, Integrated LED Flush Mount, LED Flush Mount, Flush Mount, Mount
---|---