Hukoro F50344-QC 4Light Indoor Glass Retro Pendant Light Instruction Manual
- October 30, 2023
- Hukoro
Table of Contents
Instruction Manual
ASSEMBLY INSTRUCTIONS
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
Unscrew the ball nuts from the mounting unit.
Use the mounting screws to attach the mounting unit to the junction box.
STEP 2
- Choose the length of the chain you need (Open the chain using a phillips screwdriver (not included) and pliers (not included). )
- Open the quick link. Then attach it to the fixture. Close the quick link.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 3
- Weave the fixture wire and the fixture ground wire through the chain and canopy.
- Open the quick link. Then attach it to the canopy.
Close the quick link.
STEP 4
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled green
ground screw. Then, connect the positive, negative and ground wires with the
supplied wire nuts. Secure with electrical tape.
STEP 5
Attach the canopy to the mounting screws through screw holes as shown, and
secure it with ball nuts.
STEP 6
Install bulbs (not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>