HOMCLOUD 99641 Snap15 Bullet Battery Powered Outdoor WiFi Camera User Guide
- June 4, 2024
- HOMCLOUD
Table of Contents
HOMCLOUD 99641 Snap15 Bullet Battery Powered Outdoor WiFi Camera
What’s in the box
Please consult this checklist for all parts.
Description
Power port DC 5V±10%
Power on/off Power on/off
Status light
- Solid red light on: the camera is turning on or malfunctional
- Blinking red light: awaiting Wi-Fi connection (slowly blinking) connecting the Wi-Fi (quickly blinking)
- Blinking blue light: currently connecting
- Solid blue light on: the camera runs correctly
SD card slot Support local SD card storage (Max.128G)
Reset Press and hold on for 5 seconds to reset the camera
Charging
- Solid red indicator on: battery is charging
indicator
- Solid blue indicator on: charging completed
Battery capacity 14400mAh (three 21700 lithium-ion batteries)
Install
Mode Bracket Installation
- Fix the bracket on the wall
- Install the camera in the bracket and lock it with the screw
Connect
Download and Registration
Homcloud is available for both iOS and Android OS a.
-
Download Homcloud App from Store or Google Play or scan QR code below.
-
Enter the register/login interface and register with your country area code and phone number/email address.
-
Wait a few minutes for verification code (by email or text message) and enter it where required along with a password (between 6 and 20 numbers and letters). Set up router This device only supports 2.4GHZ frequency band router, does not support 5GHz frequency band router, please set the relevant parameters of the router before Wi-Fi configuration, Wi-Fi passwords do not include special characters Such as-@#$% & (). When the device is configured in Wi-Fi, the mobile phone and device are as close as to the router, which can speed up the configuration of the device.
Set up router
This device only supports 2.4GHz frequency band router, does not support 5GHz
frequency band router, please set the relevant parameters of the router before
Wi-Fi configuration, Wi-Fi passwords do not include special characters such
as-@#$%°8*(). When the device is configured in Wi-Fi, the mobile phone and
device are as close as to the router, which can speed up the configuration of
the device.
QR Code Configuration
-
Connect your mobile device to a 2.4GHz Wi-Fi Network and launch Homcloud App.
-
Make sure you have completed all steps of the installation part.
-
On the Homcloud homepage tap “add device” or the icon “+”. After that tap “Smart Webcam” on the Wi-Fi smart device list.
-
Hold the camera 15 to 20cm in front of the mobile phone for the camera to scan the QR code. When the camera comes out with a “dong dong dong’ sound you can complete the configuration in about 30 seconds.
Scan with the camera
When you tap CONTINUE, the mobile phone displays a QR code. Hold the camera 15 to 20 cm in front of the mobile phone for the camera to scan the QR code. -
when connecting. you should make sure your router, mobile, and camera are as close as possible. When camera added successfully, click “2” you could also DIY the camera’s name
Connecting
Make sure your router, mobile, and device are as close as possible
Icons
- Enlarge the image full screen.
- Turn on receiving audio.
- Switch to Full HD resolution (SD is Standard Resolution).
- lake a snapshot (It will be saved on your smartphone).
- Activate smartphone microphone and speak through camera.
- Record a part of a video (it will be saved on smartphone).
- Play recorded video on SD card.
- Access Cloud recordings (extra service).
SETTINGS
In “Smart Camera” interface, click “you can set the camera common functions.
Specifications
- Homcloud code: ME-WCS15
- Model No: Snap 15SS
- Power: DC 5V1A
- Resolution: 2Mp. 1920(H) 1080(V)
- IR Distance: 10m
- Battery capacity: 14400mA
- Waterproof grade: IP65
- Working temp: -20 C- 50 C
- View Angle: 120
- Dimension: 156x83x62 mm
- PIR distance: 9mn
- Lens: [email protected], 130
Wi-Fi standard
- Wi-Fi standard: 2.4G-2.4835 GHz Wi-Fi (EEEB02.11b/g/n)
- Channel bandwidth: Support 20/40MHz
- Wi-Fi security: WPAWPA2, WPA-PSKWPA2-PSK, WPSs
- Consumption: 150-200mA Max working
- Max transmission power: <20 d b m
- Communication protocol: HTTP.DHCP DNS.TCP/IP
- Compression: H.264
- Storage: SD CARD(max 128GB), Cloud
FUNCTIONS
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview in
App
Full-duplex audio
You can see and hear the visitor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to
your cell phone.
Low battery alarm
When the battery power is lower than your set, the App will send a
notification to your mobile phone.
Record
Using SD card or opening the Cloud-Storage Service, to keep recording for
every moment
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Google Home Control Note:
You will need to have set up an google account prior to linking your
Homcloud device.
-
Select Menu’ and then “Home Control”
-
In the Home Control’ screen, select the +icon in the bottom right.
-
A list will appear showing actions and a search functions to access more apps: from here. Choose the Smart Life app
-
Log into your Homcloud account with your email address or mobile number
-
Click Done, and then it will give you a list of commands available.
-
When successfully linked, you will see it on your “Home Control” screen at the bottom of the app screen. You can control your Homcloud devices through Google Home.
Chromecast Control
-
Tap ‘Home Control’ in the side menu on the Google Home app’s home page. then tap ‘+
-
Find Smart Life in the list. In the new window, select your Homcloud account’s region. type your Homcloud account and password, then tap ‘Link Now. After you assign rooms for devices. your devices will be listed in the Home Control page.
Now, you can display the live image of your smart camera through Google Chromecast.
Alexa Control Note:
You will need to have set up an Alexa account prior to linking your Homcloud
device
-
Select ‘Menu’ and then “Skill
-
Search for the app and enable it.
-
Log into your Homcloud account with your email address or mobile number.
-
Select “Discover Device” and the app will begin searching.
-
When successfully linked, you will see a list of connected Homcloud devices. You can now control your Homcloud devices through Alexa with your voice.
FAQ
Q The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to
the router, and if not, it is recommended to reset the device and add it again
Q Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera,
but cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the
device again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the
SD card is normally available and the format is FAT32. And the TF card can’t
be identified when the internet environment is not good.
Q Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened; Message notification and authority
confirmation in the mobile phone system have been opened.
DECLARATION OF CONFORMITY
Hereby, Life 365 Italy S.p.A. declares that this wireless device complies with the essential requirements and other provisions corral of Directive 2014/53/EU of the European Parliament and of the Advice. The declaration can be consulted on the website www.homcloud.com/doc. “Homcloud” is a registered trademark of Life 365 Italy S.p.A. Imported by: Life365 Italy S.p.A. – European General Agency Vaile Roma 49/a, 47122 Forli, Italy – Made in China