Hukoro F15151-11I 1 Light Matte Black Wall Light with Clear Glass Shade Instruction Manual
- October 30, 2023
- Hukoro
Table of Contents
Hukoro F15151-11I 1 Light Matte Black Wall Light with Clear Glass Shade
Product Information
The product is a light fixture that comes with a mounting unit and hardware required for installation. The package includes screws, wire nuts, and mounting screws. The product also comes with an exploded parts diagram for reference. The light fixture requires a ladder, safety glasses, electrical Phillips tape, screwdriver, flat blade screwdriver, pliers, and wire strippers for assembly. The product may differ slightly from the parts shown in the diagram.
Product Usage Instructions
CAUTION: Before starting assembly, ensure that you have removed the fuse at the fuse box.
Step 1: Mounting Unit Installation
- Unscrew the ball nuts from the mounting unit.
- Use the mounting screws to attach the mounting unit to the junction box. Use a ladder and safety glasses while doing this.
Step 2: Electrical Connection
- Connect the ground wire to the mounting unit using the preinstalled green ground screw.
- Connect the positive, negative, and ground wires from the junction box to the fixture using the supplied wire nuts. Secure with electrical tape.
- Use sealing tape (not included) to seal any gaps.
Step 3: Fixture Attachment
- Attach the fixture to the mounting unit through screw holes as shown in the diagram.
- Secure the fixture with screws.
- Use caulk in the back plate and wall mounting surface to prevent water from entering.
Step 4: Bulb Installation
- Install bulbs (not included) in the fixture.
By following these instructions, you can install the light fixture safely and effectively. Please contact customer support if you have any questions or concerns.
ASSEMBLY INSTRUCTIONS
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
Unscrew the ball nuts from the mounting unit. Use the mounting screws to
attach the mounting unit to the junction box.
STEP 2
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled green
ground screw. Then, connect the positive, negative and ground wires with the
supplied wire nuts. Secure with electrical tape.
STEP 3
Attach the fixture to the mounting unit through screw holes as shown, and
secure it with screws.
NOTICE: Please use caulk in the back plate and wall mounting surface to prevent water from entering.
STEP 4
Install bulbs (not included).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>