Hukoro Unbranded YOUKAIN F50465-QC 5 Light Black Industrial Triangle Cage Chandelier Instruction Manual
- October 30, 2023
- Hukoro Unbranded YOUKAIN
Table of Contents
Hukoro Unbranded YOUKAIN F50465-QC 5 Light Black Industrial Triangle Cage
Chandelier
Product Information
The product is a light fixture that requires assembly and installation. The package comes with various hardware, including a fixture stem, iron racks, decorative screws, screws, ball nuts, swivels, ceiling plate, baseplate, lanyards, washers, decorative nuts, mounting unit, mounting screws, wire nuts, and bulbs (not included). The product also requires tools such as a ladder, safety glasses, electrical Phillips, tape, screwdriver, flat blade screwdriver, pliers, and wire strippers. The parts shown in the manual may differ slightly per light fixture.
Product Usage Instructions
- Weave the fixture wire and fixture ground wire through stem A. Screw stem A into the fixture.
- Attach iron rack B to iron rack A using decorative screws.
- Weave the fixture wire and fixture ground wire through the iron rack B and ball nuts A. Attach the fixture onto iron rack B using ball nuts A and screws.
- Unscrew the ball nuts B from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box.
- Disassemble the swivels under the Ceiling Plate by unscrewing decorative nuts. Keep the Baseplate, washers, and lanyards for later use.
- Weave the fixture wire and fixture ground wire through the stems (BjE) and swivels. Install swivels and stems (BjE) into the fixture. Install stems based on the desired length of the item on the fixture.
- Weave the fixture wire and fixture ground wire through the ceiling plate, baseplate, lanyards, washers, and decorative nuts. Install baseplate, lanyards, and swivels into the ceiling plate, and secure with a washer and decorative nuts.
- Attach the lanyards to the mounting unit. Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative, and ground wires with the supplied wire nuts. Secure with electrical tape.
- Secure the canopy to the mounting unit with the ball nuts B.
- Install bulb (not included).
Note: Use the tools required as mentioned in the manual. Ensure that you follow all instructions carefully to avoid any damage or injury.
ASSEMBLY INSTRUCTIONS
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
- STEP 1: Weave the fixture wire and fixture ground wire through stem A. Screw stem A into the fixture.
- STEP 2: Attach iron rack B to iron rack A using decorative screws.
- STEP 3: Weave the fixture wire and fixture ground wire through the iron rack B and ball nuts A. Attach the fixture onto iron rack B using ball nuts A and srews.
- STEP 4: Unscrew the ball nuts B from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box.
- STEP 5: Disassemble the swivels under the Ceiling Plate by unscrewing decorative nuts. keep the Baseplate, washers, and lanyards for later use.
- STEP 6: Weave the fixture wire and fixture ground wire through the stems (B～E)
- STEP 7 and swivels. Install swivels and stems (B～E) into the fixture. Install stems based on the desired length of the item on the fixture.
- STEP 8: Attach the lanyards on to the mounting unit. Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
- STEP 9: Secure the canopy to the mounting unit with the ball nuts B.
- STEP 10: Install bulb (not included).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>