Hukoro 2FAYMART-15171 Modern or Contemporary Clear Glass Geometric Outdoor Pendant Light Instruction Manual
- October 30, 2023
- Hukoro
Table of Contents
2FAYMART-15171 Modern or Contemporary Clear Glass
Geometric Outdoor Pendant Light
Instruction Manual
ASSEMBLY INSTRUCTIONS
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
If you need further assistance, please contact us by Email: customersupport@superiordecorinc.com
TOOLS REQUIRED
HARDWARE INCLUDED
|
|
|
|
|
|
---|---|---|---|---|---|---
Fixture| Chain| Canopy| Screw Collar Ring| Mounting Unit| Mounting Screws|
Wire Nuts
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
- Choose the length of the chain you need (Open the chain using a Philips screwdriver (not included) and pliers (not included). )
- Attach the end of the chain to the loop on the fixture.
STEP 2
Use the mounting screws to attach the mounting unit to the junction box (not
included).
STEP 3
- Pass the chain and the branch wires through the screw collar ring and canopy.
- Attach the end of the chain to the mounting unit.
- Feed the branch wires through the pipe nipple on the mounting unit.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 4
Make the electrical connection from the junction box (not included) to the
fixture. Connect the ground wire to the mounting unit using the
preinstalled green ground screw. Next, connect the positive, negative and
ground wires with the supplied wire nuts. Secure with electrical tape.
STEP 5
Secure the canopy to the mounting unit with the screw collar ring.
NOTICE: Before use, add silicone glass sealant between the ceiling and
the canopy to completely cover the gap.
STEP 6
Install bulb (not included)