Hukoro F76431-QC 1-Light Kitchen Island Mini Pendant Installation Guide

October 30, 2023
Hukoro

Hukoro F76431-QC 1-Light Kitchen Island Mini Pendant

Hukoro-F7643-QC-1-Light-Kitchen-Island-Mini-Pendant-
product

Product Information

The product is a light fixture that comes with all the necessary hardware and tools required for assembly. The hardware included in the package are Fixture, Glass Shade, Stems, Canopy, Mounting Unit, Ball Nuts, Mounting Screws, and Wire Nuts. The product also comes with a set of assembly instructions that guide the user through the process of assembling and installing the light fixture.

Product Usage Instructions

Before starting the assembly process, make sure you have all the tools required for assembly. The tools required are Ladder, Safety glasses, Electrical Phillips tape, screwdriver, Flat blade screwdriver, Pliers, and Wire strippers.

ASSEMBLY INSTRUCTIONS

CAUTION

  • Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
  • Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

TOOLS REQUIRED

Hukoro-F7643-QC-1-Light-Kitchen-Island-Mini-Pendant-
fig-1

HARDWARE INCLUDED

Hukoro-F7643-QC-1-Light-Kitchen-Island-Mini-Pendant-
fig-2

  • PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

EXPLODED PARTS

Hukoro-F7643-QC-1-Light-Kitchen-Island-Mini-Pendant-
fig-3

INSTALLATION

  1. Unscrew the ball nuts from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box.
  2. Weave the fixture wire and fixture ground wire through the stems and canpoy. Install stems based on the desired length of the item, adding canopy once finished.Hukoro-F7643-QC-1-Light-Kitchen-Island-Mini-Pendant-fig-5
  3. Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.Hukoro-F7643-QC-1-Light-Kitchen-Island-Mini-Pendant-fig-6
  4. Secure the canopy to the mounting unit with the ball nuts.Hukoro-F7643-QC-1-Light-Kitchen-Island-Mini-Pendant-fig-7
  5. Remove the socket ring from the socket. Use the socket ring to attach the glass shade to the fixture.
  6. Install bulb (not included)

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Hukoro User Manuals

Related Manuals