Attop A30 Remote Control Camera Drone User Manual

A30 Remote Control Camera Drone
User Manual

A30 QUICK START GUIDE

Package Contents

Charging

Charging Guide for Drone Connect the battery with USB cable, if battery indicator OFF, means in charging status. The battery indicator ON, means charging competed. A
Warning: The voltage of USG adapter cannot be over 5V, or 050 charger would have risk to burn as overload charging

Install

1. Slander Installing
   • Insert the slander into specified position.
   • Pull to lake them out

2. Protective frames Installing 1.Insert the frames into specified position
   2. Pull to take them out

3.  Battery Installing
   1(3) Open the battery door
   2 Connect the battery to the battery socket on drone, and put it into the battery space, then close the battery door

4. Mobile Device Holder Installing (Only for WIFI camera version’
   1. Insert the Mobile Device Holder into sketched position
   2. Pull the button on the holder to take it out

Remote Controller

Preparing To Fly

(1) Switch On the Power (2) Frequency Matching
Power on the drone and the controller, place it onto a flat surface (Let the drone facing forward ) and push the left throttle stick to the top point and then down to the lowest point, when the controller would make a sound ‘beep’ , and the lights stop flashing then frequency matching succeed.
(3) Calibration Place the None onto a flat surface, press the ‘One Key Calibration’ on controller, when the controller make a sound “beep”, the lights on drone to be solid on from flashing, then calibration succeed
(4) Unlock the aircraft for take-off
Push the Left throttle stick to the lop point, the 4 rotors start to run, then push up the left stick again to fly
(5) One Key Take off / Landing Alter unlock the motors, press ” One Key Take Or on controller, to take off automatically. When flying in the air, press One Key Landing’ on controller, to land automatically

Using the Remote Controller

Aircraft Functions

1. Speed Mode
   Press the button of “Speed Mode on controller when flying The default speed is the most slow one, when press one be you will hear “beep beep’, that means in second speed acceleration, and press again with “beep beep beep’ sound to the final fastest speed Totally 3 speeds and repeat by pressing the button
   Remark Beginners are suggested to use the default speed to play until skillful

2. Headless mode Headless Mode: When the head of drone forwards the front, and enter into the Headless Mode, the drone will fly according to the controlled direction on remote, no matter which direction the head of drone forwards to, it will fly according to your controlled direction on remote controller

3. Trimming on the flying actions
   If the drone leans poniard/backward/weightlifter after when flying, press the trimmer button for opposite direction to trim the flying actions.

4. One Key Flip
   Press the ‘One Key Flip” on controller when flying, then you will hear a ‘beep”, then push up/down the knight stick, the drone will perform a Forward/Backward Flip

5. Photograph and Video
   To take photo, press the Photo button as picture. Press the button of “take video”, short-press to start and press again to finish and save the video.
   Please make sure to open the app on your smart phone before using it, then you can review the videos taken in the media file of app.
   Notice: Photo Nidec functions are only available for VVIFI camera version

END OF THE FLIGHT

When the flight is finished, please power off the remote controller and make it into a habit to avoid any damage. When the flight is finished, please have a long press on the battery power button for 2 seconds to shut off the power of the aircraft, and make it into a habit to remove the battery from the aircraft to avoid any damage.

Flight safety

Avoid flying over or near obstacles. crowds. high voltage power lines. trees or boles of water. DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass. DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and wand speeds exceeding 10 mist or 22 mph

Aircraft Parameters

Remote Controller Parameters

(In Wide/No Interference Signal Environment)
INSTRUCTIONS TO USE
Please read carefully this manual and operate the product as Instructed in this manual.

1. Prior to the flight, please learn and follow the local laws and regulations.
2. Please check whether each part Is in good condition. Don’t start the flight if any part is found damaged or incomplete.
3. Please follow the instructions to install the propellers and make sure they are correctly and securely attached so as to avoid fall-off in flight and the subsequent crash and unnecessary damages.
4. Make sure that the batteries of the remote controller, camera, and drone are full charged before each flight.
5. 1t Is suggested to operate the flight in a wide and open space with few buildings in the surroundings so as to avoid radio jam or intervention from communication stations, WiFi, high-voltage power lines, and so on.
6. Be sure to power on the aircraft firstly, then power on the controller next before operating the flight.
7. When prepared to fly, make sure no personnel is inside the radius of 10 meters around the take-off/landing area, and try to avoid any unsafe factors (such as obstacles, crowds, high-voltage power lines, trees, water surface, etc.).
8. Before taking off, please calibrate the compass; it is suggested to take off with GPS signal available (switch to GPS mode and the rear light of the aircraft will flash in green). On taking off, the location where the GPS signal is initiated will be saved as the defaulted take-off point; the return mode will navigate the aircraft to land at this defaulted initial place.
9. Do not operate the flight in bad weather, such as gusty wind (over Force 3), snow, rain, foggy days, and the like.
10. Do not operate the flight in no-flight zones (such as airports and crowded areas) restricted by laws.
11. Do not operate the flight in poor mental conditions (such as being drunken, heartbroken, etc.).
12. Please keep the aircraft and all Its parts out of the reach of children. In the case children swallowing parts by accident, they should be taken to the hospital immediately.
13. Please remove the battery and place it in a dry, moisture-proof, fog-proof and explosion-proof environments with no electromagnetic interference.
14. Please do not disassemble, re-group, or modify the aircraft.

Please read carefully this manual and operate the product as instructed in this manual. If don’t follow these instructions to operate, ATTOP will not be possible for any troubles occurred.

SAFETY AND PRECAUSTIONS

CAUTION
Remote-control models of quadcopter are dangerous merchandise. Their Mont must be operated away from the crowd. Such factors as man-made improper assembly or mechanical damage, poor control of the electronic equipment, as well as ten unfamiliar manipulation may lead lb unexpected flight accidents. such as uncontrolled flight and aircraft damage. users are advised to pay attention to the night safety and understand that they are held responsible for any accident caused by negligence.

Special aircrafts for Indoor and outdoor should stay away from barriers
This product Is a remote-control aircraft suitable for use in indoor and outdoor environment (the outdoor wind power less roan Force 1). To fly the aircraft. please ChM” e appropriate obstacle-free indoor and outd0Or MT with proem distance kept from um crowd Of pet animals. Please don’t pate Ilse product I any unsafe environments. such as places of heat. wires. power supply. etc . so as to prevent the quadcopter fr0111 me rests of re and electric shock resulting from collision. ditching, and entangling or the quadcopter.|
---|---
Safe usage of the lithium battery
Lithium batteries are more dangerous than others. Be sure to lead carefully and follow the follow ng precautions before using It. We 1I1 not be held responsible for any main’ caused by any Improper use of ten battery To avoid the danger of explosion or fires, it Is forbidden to use other chargers than the one made Dy our factory. Such actions done to ten battery as impact. dismantling, reverse connection or the positive and negative poles. and burning are forbidden. Avoid metal objects from contacting the positive and negative poles of the battery, nicen may cause snort circuit Please prevent snare items from piercing the battery. and avoid ten risk of battery are. Please be careful when charging the battery. Make sure Inala the battery is charging veining your sight Keep it out of the reach or young children so as to avoid dangers Don’t charge the battery when the battery is heated alter use. Otherwise. It may cause the battery to expand. change, explode OF even catch fire. threatening the safety of lire and property To dispose or ten battery, please recycle the battery in strict Compliance with the waste disposal laws and regulations of local countries or regions in order not to pollute the environment.|
Away from moist environments
The interior of me aircraft is also composed of many sophisticated electronic Components so it must absolutely be kept away from moisture or water vapor. Don’t operate ten air ran in the bathroom or on rainy days. otherwise water apo may get Inside of ten aircraft and cause mechanical parts and electronic components to malfunction leading to expected accidents|
Never misuse the product
Please do not al tatty amble or modify the product. For any upgrade. repair r maintenance, please use the parts specified In our catalog to ensure the arty or the structure Please mate sure the product is used within the inn of operation Don’t overload the product. and don’t use it in any other Illegal ways than prescribed by Safety Concerns and law;|
Safe usage of the battery
Please make sure of the positive and negative poles when installing the battery. Please don’t mix the old and new batteries in use at the same time so as to avoid damaging the battery life. If the product is not to be used for a period of time, please remove the battery so as to avoid battery leakage or malfunction. Do not use the battery if it is leaking. To dispose of the battery, please recycle the battery in strict compliance with the waste disposal laws and regulations of local countries or regions in order not to pollute the environment.|
---|---
CAUTION
Keep away from source of heat
The aircraft is mostly made of PA fiber or polyethylene as well as other main materials for electronic products. Therefore, it must be kept from the source of heat and exposure to sunlight so as to avoid possible damage of deformation or even meltdown due to high temperatures.|
WARNING Never operate the product alone
This product is suitable for users over 14 years old. Since the remote-control quadcopter may pose a certain degree of difficulty for learners at the beginning, it is recommended for it to be operated under the guidance of experienced people for the sake of safe flight.|

NOTE: This equipment has been tested and fotaid to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference In a residential installation. ThH equipment generates uses and an radiate radio frequency energy and If not installed and used Inaccordance with the Instructions, may cause harmful Interference to radio communications. However, there Is no guarantee that Interference will not occur In a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the Interference by one or more of the following measures:
– Reorient a relocate the receiving antenna.
– increase the separation between the equipment and receiver.
-Connect the equipment Into an outlet on a circuit different from that to which the receiver Is connected.
-Consult the dealer or an experienced rad loti techno la n for help
Changes or modifications not expressly approved by the party responsible for camp a n cu could void the user’s authority to operate the equipment
This device compiles with Part 15 of the FCC Rules. Operation Is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any Interference received, Inducing interference that may cause undesired operation.

www.attoptoys.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>