kvm-tec KT-6021L SMARTfl ex Dual in Copper Installation Guide

: June 10, 2024
: kvm-tec

Table of Contents

Delivery Content
Quick Installation Smartﬂex Dual local/CPU – remote/CON
ACCESS TO THE MAIN MENU
SYSTEM STATUS
FEATURES MENU
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KT-6021L SMARTfl ex Dual in Copper
Installation Guide KT-6021L CPU/LOCAL
KT-6021R CON/REMOTE

Delivery Content

LOCAL/CPU Unit

1 x SV2 local (CPU)
1 x power supply until 12V 1A (EU-plug)
2 x DVI – DVI cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
4 x rubber feet

REMOTE/CON Unit

1 x SV2 remote (CON)
1 x power supply unit 12V 1A (EU-plug)
4 x Gerätefüße

kvm tec KT 6021L SMARTfl ex Dual in Copper - Delivery
Content

open the OSD main meu
The OSD main menu is opened with the default shortcut: 5 x ALT Gr
(Attention: the ﬁrst 20 seconds 5 x Scroll always works, in case the shortcut was forgotten.
Switching list: CTRL+ALT+PRINT
Changing the shortcuts in the OSD menu
Go to the Remote Settings and then navigate to Keyboard Shortcut.

Quick Installation Smartﬂex Dual local/CPU – remote/CON

Connect the CON/Remote and the CPU/Local Unit to the included 12V 1A power supply.
Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU/Local Unit. Connect keyboard and mouse to the CON/Remote Unit.
Connect the CPU/Local and the CON/Remote Unit with the network cable.
Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU/Local Unit (PC-in 1).
Now connect the cable to the DVI socket of the PC and the other end to the DVI socket of the CPU/Local Unit (PC-in 2). Then connect the monitor with the DVI cable to the CON/Remote Unit.
Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwidth of 1Gbit/sec. For video sharing the network has to support IGMP snooping.

HAVE FUN – your kvm-tec Extender is now in use for many years (MTBF approx. 10 years)

Use the monitor and keyboard to access the main menu
Access to the main menu (main menu):

Make sure the extenders, monitors and computers are turned on.
Press the Alt Gr key ﬁve times quickly. The main menu and an overview of the an overview of the submenus is displayed.
To enter a submenu, press the corresponding key.

Main menu Short Cuts :

S	Status Overview	Status menu/current status
F	Features Overview	Features settings
D	DDC Option	DDC Option Fixed Setting 1020 x 1080
L	Local Settings	Settings Local
R	Remote Setting	Settings Remote
U	Update Flash FW	Update ﬁrmware
A	About Overview	Upgrade overview
Q	Exit	Finish

SYSTEM STATUS

kvm tec KT 6021L SMARTfl ex Dual in Copper - SYSTEM
STATUS

The „Status Menu“ displays the current status of the extender connection. The menu shows the information about the connection, the resolution of the video channel and the USB status. The activated upgrades and the current FW version are displayed in the upper left corner. Link status shows if a connection is possible. Connected shows if the kvm ﬁles can currently be transferred.
Video and USB show if ﬁles are currently transferred.
FIRMWARE VERSION DISPLAY
Make sure that the main menu is open. Under „A“ – About the currently installed ﬁrmware version of the remote (CON) and local (CPU) extender is displayed.

Press the F key to enter the Features menu.

Features Menu

P| Point to Point Mode| Enabled/Disabled
(Point to Point excludes itself with Matrix mode)
---|---|---
M| Matrix Switching Mode| Disabled/Enabled
D| Freeze last Image| (Disabled)Disabled/Enabled
E| USB Emulation Mode| (Disabled ) Disabled/Enabled
S| USB Save Feature| (mass storage usable) Disabled/Enabled
C| Diagnosis| Diagnostic menu
U| Unlock Features| Activate features
I| IP Management| IP Management

POINT TO POINT
By pressing the “P” key you can switch the Point to Point mode off and on
ATTENTION – if the Point to Point mode is activated, the Switching Mode cannot be activated.

kvm tec KT 6021L SMARTfl ex Dual in Copper - Point
mode

MATRIX SWITCHING MODE
By pressing the “M” key, you can switch the Matrix Switching Mode off and on.

kvm tec KT 6021L SMARTfl ex Dual in Copper - Figure kvm-tec Support
support@kvm-tec.com
Phone: +43 2253 81912 – 30
We are here for you to answer your questions about installation?
Manual download www.kvm-tec.com or kvm-tec Installation channel on our homepage personally +43 2253 81912

KVM-TEC
Gewerbepark
Mitterfeld 1 A
2523 Tattendorf
Austria
www.kvm-tec.com| KVM-TEC ASIA
p +9173573 20204
sales.apac@kvm-tec.com
KVM-TEC CHINA
– P + 86 1360 122 8145
chinasales@kvm-tec.com
www.kvm-tec.com| IHSE GmbH
Benzstr.1
88094 Oberteuringen
Germany
www.ihse.com
---|---|---
IHSE USA LLC
1 Corp.Dr.Suite
Cranburry NJ 08512
USA
www.ihseusa.com| IHSE GMBH Asia
158Kallang
Way,#07-13A
349245 Singapore
www.ihse.com| IHSE China Co.,Ltd
Room 814
Building 3, Kezhu Road
Guangzhou PRC
www.ihse.com.cn