Attop F16 Drone with Camera for Adults User Guide
- May 15, 2024
- Attop
Table of Contents
F16 Quick Guide
Suitable for 14 years old and above Please read this instruction carefully before use, and keep it properly for reference.
F16 Drone with Camera for Adults
https://Attop.afterservice.vip?utm_source=card&utm_medium=qrcode
Use camera or QR scanner to scan
Visit: https://attop.afterservice.vip
Call: +1 (833) 307 2271 (Toll-free)
Email: attop@afterservice.vip
www.attoptoys.com
Customer Service Email :
attop@afterservice.vip
Downloading App
http://www.lwcxtech.com/QRCode/AppQRCode/G07Drone.asp
Scan the QR code, corresponding to either App Store™ or Google™ Play Store and
download the “ G07 Drone ” application for free.
Required Operating Systems: iOS v8.0 and later / Android v4.3 and later Tip:
Please use a smartphone that can support receiving 2.4G and 5G WiFi signals.
Pairing
Turn on the aircraft and place the aircraft on the flat ground. At this time, the aircraft indicator flashes and then turn on the remote control. And then pairing automatically between drone and remote control. Pairing success and completed after 2-3 seconds, the remote control handle emits “beeps” sound.
Note:
- The GPS mode is default when turn on the drone.
- Could not be change to indoor mode when the drone searched GPS signal.
Gyroscope calibration
The aircraft must calibrate the gyroscope before flight, press the gyroscope calibration button briefly, and the aircraft indicator flashes into the gyroscope calibration. After the calibration is completed, After the flash, the calibration is completed.
Connecting to Wi-Fi
-
Connect your smart phone to the Wi-Fi network created by the drone.
Check the drone’s status in the “G07 Drone” app. -
Your smartphone will launch a search for the available Wi-Fi hotspot:
-
Select the Wi-Fi network: F16-XXXXXX
-
Wait for several seconds until your smartphone connects to the drone’s Wi -Fi hotspot. This connection is generally represented by the Wi-Fi logo appearing on your smartphone’s screen.
-
Select the F16 drone and click “Start” to into the interface.
Geomagnetic calibration
After the gyroscope calibration is completed, the next step is geomagnetic
calibration, press and keep the gyroscope / geomagnetic calibration button for
2 seconds, and the tail light of the aircraft flashes into the geomagnetic
calibration. And then, take the aircraft and rotating horizontally 3-5
circles.
After the remote control handle emits a “beep” sound, then rotating the
aircraft vertically, the remote control handle emits a “beep….” sound again,
and the calibration is successful.
One key take-off / landing (Shoot press)
GPS Mode (screen show “GPS ON”):
After searched 12 GPS signals and pushing the Left stick to the lowest left
corner, and meanwhile push the right stick to the lowest right corner (Pic 1),
then the motors of the drone start rotating. And now press one key take off
buttom (Pic 2), then the drone will be taking off.
Indoor Mode: After frequency pairing between drone and remote control and then
long press the Indoor mode buttom (Pic 3) to change to Indoor mode (screen
show “GPS OFF”).
Next, push the Left stick to the lowest left corner, and meanwhile push the
right stick to the lowest right corner (Pic 1), then the motors of the drone
started rotating. And now press one key take off buttom (Pic 2), then the
drone will take off.
Emergency stop (Long press)
Long press one key take off buttom (Pic 2) to activate emergency stop when the drone flight altitude not higher than 2m .
30-Day Whole Unit Warranty For Quality-Related Issue
For 30 days after the date of purchase, we take care of all quality-related
issues with a REPLACEMENT.
Reminder : Be sure to operate your drone as directed.
90-Day Accessories Warranty For Any Reason
For 90 days after the date of purchase, we take care of all accessories
quality-related issues with an ACCESSORY REPLACEMENT.
Reminder: Be sure to maintain your drone as directed.
Guangdong Attop Technology Co., Ltd.
Linghai Industry Zone, Laimei Road,
Chenghai District, Shantou,
Guangdong, China.
Website: www.attoptoys.com
Customer Service Email :
attop@afterservice.vip