Attop A11 Mini Drone for Kids User Manual
- June 6, 2024
- Attop
Table of Contents
All Operation Manual (Suitable for wide indoor environments operation)
www.attoptoys.com Customer Service Email :
support@attoptoys.com
MAJOR PARAMETERS
Main rotor diameter: 31mm| Body wide: 90mm
Body length: 90mm| Body height: 26mm
Full weight: 22.5g±2g| Main motor model: 06×15 4pcs
Gyroscope: Build-in| Charging time: about 30 min
| Lifetime: 4minutes to 6minutes
Standard Accessories
Name of each part of the remote control
- Take off / Landing button
- Press down to enter the flip function
- ON/OFF
- Speed Adjustment
- Rotate button
- Calibration button
- Press down to convert to standard mode
Name of each part of the aircraft
How to Change the propellers
– All drones have two rotors that spin clockwise and two rotors that spin
counter-clockwise.
– Make sure to place the propellers on the correct axis or they will not spin
correctly and the drone will not lift
– Each propeller is marked on its surface with A or B. There may be a number
after the letter but you can ignore the number.
– Make sure to follow the graphic as above to see where to place the
propellers
Batte charging operation
Low ba tery warning When the drone is flying, the LED indicator on the drone
flashes, and the remote control handle emit a “beer alarm sound, indicating
that the drone power is too low. At this time, the drone needs to return and
charge. Charging Guide for Drone
Step. Connect the USB cable to the adapter.
Step2. Connect the other end of a USB cable to the battery.
Step3. Connect the adapter to the socket. If the LED light of the USB plug is
on, the charging is completed. Otherwise, it means charging. Please use the
drone when fully charged.
Note : The connected USB Adapter should be less than or equal to 5V 2A,
the voltage not be greater than 5V, otherwise there is a risk of overloading
the USB cable. The flight time is about 5-6 minutes and the charging time is
about 30 minutes.
Simple instructions (Product default headless mode)
Simply instructions (Product default headless mode)
Simply takeoff steps
A: Turn on the power of the drone, the LED is start flashing. Then
place the drone on a flat surface with the head forward.
B: Turn on the power of remote, you will hear beeps from the remote. The LED of the drone is quick flashing and then breathing flashing means is pairing successfully.
E: Auto Hovening| C Press the Calibration button, the LED is quick flashing
and then breathing flashing means is calibration completed
D: Push the Left Control Stick up and release, now the propellers start
rotating, then press One Key Take off button to take off
One Key Landing :
A Press the landing button andlandslow1y| B Landing on the ground, the motor stops rotating
One Key 360 degree rotation :
A: Press the spin button| B: 360-degree rotation in the air Z”:.z
Speed Adjustment :
Switch the speed button to change the speed gear while flying. There are 2
gears, switch the button to the left, you will hear”beep”, which means it is
on first gear speed. Switch the button to the right, you will hear “beep,
beep” means it is on second gear speed.
Remark : Beginners would be suggested to use the first gear speed firstly
to play until skillful.
Headless Mode :
The default setting is Headless Mode. Press the right rocker vertically and
you will hear “beep”, which means is cancel headless mode and convert to
standard mode. And press again to convert to headless mode.
LED to correspond to the state of mode Headless mode: Breathing. Standard
mode: Steady.
Using the Remote Controller
One Key 360-degree flip function operation exercises
Step one
Fly the drone to a height over 6 feet, then press the Left Control Stick
vertically to activate 360° Flip function. Next, move the Right Control Stick
to flip the drone accordingly.
Note : This function can’t be activated when the battery of the drone is
low power. 
Step two
Toss to staunch
After frequency matching and calibration finished, you can hold the aircraft
in your hand, and then horizontally throw it out. The aircraft will
automatically unlock the blades and fly in the air.
Note: It is better to operate the calibration step again after operating
Throw to fly for several times. The function will be more stable.
Safety Precautions
CAUTION
Remote control model DRONE, four-axis aircraft are dangerous goods, the
flight must be away from the crowd. Improperly assembled or components
damaged, poor electronic control equipment, and not being familiar with the
operation may lead to flight out of control and other accidents. Please be
sure to pay attention to flight safety, and need to understand the
responsibility of any accident caused by negligence.
CAUTION
For indoor and outdoor special machines, please stay away from
obstructions.
This remote control aircraft is suitable for indoor and outdoor (including outdoor wind is not greater than level 1), please select the free indoor and outdoor space, and with the crowd or pets to maintain an appropriate distance.Please operate in a safe situation too far away from heat, power, wire, etc., so as to avoid four-axis aircraft collision, forced landing, entanglement caused by fire, electric shock, and other dangers, and resulting in loss of life and property.
CAUTION
Safety of using lithium batteries
Li-po batteries are more dangerous than other batteries, please be sure to
read and according to the following precautions before using the battery, the
company will not be responsible for any damage caused by improper use.
Never use the charger outside our factory to charge to avoid the risk of
explosion fire. Do not impact, dismantle, positive and negative reverse,
burning the battery, and avoid metal objects touching positive and negative.
And please prevent sharp items from piercing the battery to avoid the risk of
battery fire.
If the battery heat after use, please do not charge. Otherwise, it will cause
the battery to expand, deformation, explosion and even fire burning, and harm
the safety of life and property. Dispose of batteries, please strictly in
accordance with the use of the country or region of the waste clean-up laws to
recover, so as not to pollute the environment.
CAUTION
Keeping away from the damp environment
The aircraft is composed of many sophisticated electronic components, it must
prevent moisture or vapor, and avoid use in the bathroom or rain, in order to
prevent vapor into the aircraft inside and prevent the breakdown of internal
parts and electronic parts caused by unexpected accidents.
CAUT1ON
Using the product correctly
Do not disassemble, modify, upgrade, and repair the aircraft. Please use the
components in the catalog to ensure the safety of the structure. Be sure to
operate within the product limits, do not overload, and do not use for illegal
purposes.
CAUT1ON
Safety of using a dry battery
Please confirm the positive and negative position of the installation, old and new batteries do not mix at the same time to avoid affecting battery life. If you do not use this product for a long time, please remove the battery, so as to avoid battery leakage and failure. Do not use the battery if it leaks. Dispose of batteries in accordance with the waste disposal laws of the country or region, and do not discard them to avoid polluting the environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>