iFi Audio ZEN Stream User Manual
- June 7, 2024
- iFi Audio
Table of Contents
iFi Audio ZEN Stream
-
1. Power switch and indicator
-
Network Status LED
The LED color scheme indicates the signal strength and network status received by ZEN Stream from the router.
|
LED
|
Speed
---|---|---
Internet|
White
Cyan
|
Fast
Slow
Local Network|
Green
|
Fast
(No Internet)|
Yellow
|
Slow
No connection|
Red
|
–
-
3. Audio Format LED (kHz)The LED colour scheme indicates the audio format and sampling frequency received by ZEN Stream from the music source.
LED
|
Mode
---|---
Green
|
PCM 44.1/48/88.2/96kHz
Yellow
|
PCM 176.4/192/352.8/384kHz
Cyan
|
DSD 64/128
Blue
|
DSD 256
OFF
|
No Streaming
4. LED for Hotspot Status LED
|
Status
---|---
Flashing
|
On and awaiting connection
ON
|
Hotspot Connected
OFF
|
Hotspot off
5. LED/HOTSPOT switch
* LED ON/OFF (short press)
* Hotspot ON/OFF (long press) 
6. Antenna Please attach the enclosed antenna for maximum reception quality.
7. System (Mode) selector The following 5 play modes can be selected:
* All In One. Use for set up
* Roon only
* TIDAL only
* NAA (Network Audio Adapter) only
* DLNA only
8. SPDIF (Coaxial) output This is a coaxial output with iPurifier technology built-in.
9. USB Type A x 2 Compatible with USB 2.0 and USB 3.0
* Output – Connect to Dac
* Input – Connect to HDD, USB DISK etc These two USB ports have ANC technology built- in
10. System upgrade port Used for system firmware upgrade.
11. Ethernet For a Ethernet connection directly from a router.
12. Factory Reset Long press >3s and WAIT for ~5mins
DO NOT POWER OFF!
**Loss of power during this period may damage your device and leave it
unusable.
13. DC power supply connection DC 9V/1.8A-15V/0.8A DC power input. Please connect ZEN Stream to the enclosed
power supply.
Tip: For all the various network connection methods, please visit our
website.
Specifications
| Input voltage | DC 9V/1.8A-15V/0.8A, AC 100 -240V, 50/60Hz |
|---|---|
| Input | WiFi/Ethernet/USB DISK, HDD etc. |
| Formats | PCM384/DSD256 |
| Output | USB3.0/ Type-A Socket x2 and SPDIF (Coaxial) |
| Power Consumption | No Signal ~6W |
Max Signal ~10W
Dimensions| 158 x 100 x 35 mm
6.2″ x 3.9″ x 1.4″
Net Weight| 578 g (1.27 Ibs)
Warranty Period| 12 months
Specifications are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>