BRINK 310640 Excellent 400 Electric Preheater Instruction Manual

June 9, 2024
BRINK

BRINK 310640 Excellent 400 Electric Preheater

BRINK 310640 Excellent 400 Electric Preheater

Replacing preheater

Important: Only possible for Reno vent Excellent Plus!

  • Switch off the main power from the Renovent Excellent 300/400/450.
  • Position the preheater so that the arrow does point to the appliance and place it on the duct “From atmosphere”.
  • Connect the wiring of the preheater as shown on the wiring diagram on page 2 is displayed.
  • Turn on the power of the Reno vent Excellent 300/400/450 as well as the preheater.
  • Parameter 13 must be changed to 1.
I = To dwelling
II = To atmosphere
III = From dwelling
IV = From atmosphere

Replacing preheater

Parameter Description Factory setting Range
13 Heater Of Preheater posthaste

Wiring diagram

Wiring diagram

A Renovent Excellent Plus
B Plus version control board
C Heating coil ( 1000W max.) Maximum safety with manual reset
D Maximum safety with manual reset
E LED maximum safety; lights up when activated
F Cables to be connected by installer
g Flow direction through the heater
C1 brown
--- ---
C2 blue
C3 green/yellow
C4 black

Technical information

Supply voltage 230V 50Hz
Weight 2,5 kg
Duct diameter Ø160 (300)
Overall length 400 mm
Protection degree 400 mm
Rated power IP20
Rated current 1000 W
  4,5 A

Service

When ordering parts, in addition to the article code number, please state the type of the heat recovery appliance, the serial number, the year of production and the name of the part.

Maximum safety

Heating coil
Mains cable with plug 230V

CUSTOMER SUPPORT

Wethouder Wassebaliestraat 8 7951 SN Staphorst The Netherlands
P. O. Box 11 NL-7950 AA Staphorst The Netherlands
T. +31 (0) 522 46 99 44
F. +31 (0) 522 46 94 00
info@brinkclimatesystems.nl
www.brinkclimatesystems.nl

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals