Attop X-PACK 10 Remote Control Drone User Manual

Attop X-PACK 10 Remote Control Drone

Package Contents

**Charging

**

Charging Guide for Drone
Connect the battery with the USB cable, and it battery Indicator is OFF, which means in charging Status. The battery indicator is ON. means charging completed.

Note : Please full charge the battery before flying.

Installation

1. Open up all 4 blades for the drone
   This aircraft is a folding structure. please do up all four blades Taking Off.

2. Blades Protector Installing
   Expand the buckle Of the protector. and install it onto the drone Wings.

3. Battery Installing

4. Insert the battery into the specified position.

5. To disassembly. pull the battery back to take it out.
   Remote Controller:
   Insert the 3KAAA battery into the specified position.
   

Remote Controller

1. Power switch
2. Calibration
3. Sgæed switch
4. Left stick (Altitude Control / Turn UR)
5. One key take Off / landing
6. Return
7. Headless Mode
8. Right Stick (Movement Control )
9. Forward trimming
10. Right trimming
11. Left trimming
12. Backward Trimming
13. Take Photos
14. Video

How To Fly

1. Switch On the Power

2. First power on the drone (Keep pressing for 2-sec and place it on a fiat ground or surface.)

3. Power on the Remote

4. Frequency matching
   After On the drone, both indicator lights on the drone and Remote will flash. then push the left throttle to the top. then down to the lowest, after 2 sees. the indicators will go steady. that means the frequency Succeeds in matching.

5. Compasses Calibration

6. Unlock the drone for taking-off
   After frequency matches, push the left stick to the top to unlock the motors, then the propellers of the drone start rotating.

7. Take off I Landing
   After unlocking the motors. Press “one key takes to push up the throttle directly)” to fly. Press “one key landing” (or keep pushing down the throttle directly), to land.

Emergency Stop
In case of emergency status. push the Left stick to the right corner, meanwhile push the Right stick to the left corner at the same time, drones immediately stop functions and drop off,

Using the Remote Controller

Aircraft Functions

TRIMMING ON THE FLYING ACTIONS

Adjustment for deviated to Front/Backward

• If it is forward press the down trimmer
• If it presses the up trimmer

Adjustment for deviated flying to sideward

• If it leans left, press the right trimmer
• If it leans right, press the left trimmer,

360 Flip Function

1. Press the Flip
2. Push the Stick to right. the drone will rotate 360 in the right direction

1. Press the Flip button
2. Push the stick top, the drone will rotate 360 toward the front direction.

1. Press the Flip button
2. Posh the Stick the drone Will rotate 3600 toward the left direction

1. Press the Flip button
2. Push Stick to the bottom, the win rotates toward the back direction

Speed Adjustment
Switch the spæd button to change the speed while flying. There are 2 gears, switch the button to the left, and you will hear ‘beep”. which means it is on first gear speed Switch the button to the right. You will hear a beep. Beep” means it is on second gear speed.

Remark; Beginners would be suggested to use the first gear speed first to play until skillful

Throw-to-fly function

After frequency matching and calibration, you can hold the aircraft in your hand. and then horizontally throw it out. The aircraft will automatically unlwk blades and fly in the air.

Note:
It is better to operate the calibration step again after operating the Throw to fly to several times The function will be more stable.

Return-to-home function

In regular when the drone fly forward. no matter which direction the drone heading to, press the “One Key Retwn” button, and the drone would fly straight back to the controller location.

Note:
The drone Will not land itself When operate this funaction, just fly Straight toward the take-off direction. needs to Stop by the right Stick

Headless Mode Function

• Press the Mode when the indetOr lightg Slowly Rashing, means it is in Headless Mode.
• Press the Headless Mode button again, When the indicator lights Stop flashing, means that the Headless Mode is off.
• Users are reca) mended to stay the same orientation as the drone head is facing when the takes Off
• Under Headless the forward direction is the same as the direction when the drone took off, where the head of the drone was facing.
• In order to make sure the users Can tell the drone’s direction, We use it better to stay in the same orientation as the drone facing when it takes off.
• Then no matter which direction the head is facing, the drone will have the controlled direction as the remote controller. easy to control back the drone.

Photograph and Video

Take photos:
Press the Of “take a photo” Please make sure to open the app on yow smartphone before using it, then you Can review the photos taken in the media file Of the app.

Video:
Press the button take a video”, short-press to start, and press again to finish and save the video. Please make sure to open the app on your smartphone before using it. then you Can the Videos are taken in the media file Of the app.

Aircraft Parameters

• Length of the main wing: 83 mm
• Aircraft: 98 x 120 x 33mrn
• Total weight: 54 g±2g
• Battery: 3.7V 380mAh
• Charging time: About 50 mins
• Flight time: – 7-8 mins
• Gyroscope: built-in
• Working temperature: to 40tC
• Remoter controller: 2.4G
• Motor: 7 * 16 4pcs

Remote Controller Parameters

• Wifi Transmission Range: 30-40 meters
  (in a wide open area with no electromagnetic interference)

• Working frequency: 2 4G

• Battery: 3xAAA

FAQs

Battery Using Attention

Matters needing attention

1. Rechargeable batteries are to be from the toy before being Charged.
2. NIM4echargeable batteries are not to be recharged.
3. Rechargeable batteries are only to be charged under «*ult supervision.
4. Only used to hang 2S or Liøyrner battery packs. if the Charger or battery may be damaged.
5. During Charging. the Charger be in a dry and ventilated place and far from heat sources and inflammable and explosive
6. Never immediately charge your battery packs as soon as the flight is finished. when it doesn’t down Otherwise the battery win take a risk in the swing, a fire.
7. Ensure the Correctness Of the polarity connection of the battery to the charger.
8. Avoiding the process of charging violence will result in an internal Short circuit Of the batter.
9. For the sake of safety, please use the original charging equipment and battery pack please change new one in the flying time due to long usage
10. If it is in the Charger a long time after being Saturated, the battery may automatically discharge, when the charger detects that the voltage of individual cells is lower than the rated voltage, it will until saturated. Frequently charging and discharging will shorten the lifetime of your battery pack. It is that please cut off the and took off the battery after the charging is saturated.

Maintenance of battery pack

1. The battery pack should be put in a dry and ventilated place. The storage temperature of the environment is ranged from 180C to 25*C.
2. Please avoid frequent charging and excessive discharging of the battery pack in order to proJmg its life cycle.
3. It is a must to maintain the battery pack before long-term storage. That is to charge the battery to the level of SO-60% saturation.
4. If the storage term is over I month. it is advised to monthly check the voltage of the cell ot the battery pack The voltage of every cell should be not less than 3K/ Otherwise. please refer to the arme article (3).
5. From the Viewpoint of Protection. new battery pack Should motivate usage. That is to charge and discharge 3-5 times, but discharge is not Less than the level of 70% saturation This process Will make the battery life longer and Vdtage

SAFETY AND PRECAUTIONS

FCC STATEMENT

NOTE:
This equipment has been tested and found to comply with the for a Class B digital device, pursuant to part 15 Of the FCC Rules. Those limits are to provide against intufeæ residential installation. This “equipment generates and can radiate radio agency energy and if not installed and in accordance With the instructor may cause harmful to radio communications. However, there is no guarantee that interference Will not a particular installation. If this equipment does cause harmful interference to radio or television reception, which  can be determined by turning the equipment Off and on, the user is encouraged to try to correct the interference by one or more Of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the received.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is Connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes not expressly approved by the party responsible for comp little Could void the user’s authority to operate the equipment.

www.attoptoys.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>