Attop W80 E First Quadcopter GPS 4K Drone User Manual
- June 15, 2024
- Attop
Table of Contents
- W80 E First Quadcopter GPS 4K Drone
- Specifications
- Product Usage Instructions
- Flight Environment
- Operation Requirements
- Li-Po Battery Disposal & Recycling
- Maintenance
- 1. How do I calibrate the gyroscope?
- 2. How do I initiate a return to home (RTH) procedure?
- 3. How do I take photos and videos?
- 4. How do I adjust the speed of the drone?
W80 E First Quadcopter GPS 4K Drone
Specifications
-
Fly in Open Areas Maintain Line of Sight
-
Fly Below 390 feet (120 m)
-
Avoid flying over or near obstacles, crowds, high voltage power
lines, trees, South Pole and North Pole, base station -
Do not fly near strong electromagnetic sources such as power
lines and base stations -
Do not use this drone in adverse weather conditions such as
rain, snow, fog, and wind -
Use of Gimbal
-
Use of Battery
-
Lithium-polymer batteries must not be placed with household
trash
Product Usage Instructions
Flight Environment
Fly the drone in open areas where you can maintain line of
sight. Make sure to fly below 390 feet (120 m) to comply with
safety guidelines. Avoid flying over or near obstacles, crowds,
high voltage power lines, trees, South Pole and North Pole, and
base stations. Do not fly near strong electromagnetic sources such
as power lines and base stations as it may affect the onboard
compass. Additionally, do not use the drone in adverse weather
conditions such as rain, snow, fog, and wind.
Operation Requirements
Make sure to properly use the gimbal and battery according to
the instructions provided. Follow the guidelines for gimbal usage
and battery handling to ensure optimal performance and safety.
Li-Po Battery Disposal & Recycling
Waste lithium-polymer batteries should not be placed with
household trash. Please contact your local environmental or waste
agency or the supplier of your model for proper disposal or
recycling options. You can also search for the nearest Li-Po
battery recycling center for appropriate disposal.
Maintenance
Regular maintenance is important to keep the drone in good
condition. Refer to the package contents for the included items
such as propellers and USB charging cable with charge hub. Follow
the maintenance instructions provided in the manual to ensure the
longevity and performance of the product.
FAQ
1. How do I calibrate the gyroscope?
To calibrate the gyroscope, follow the instructions provided in
the user manual. It usually involves performing specific movements
or rotations with the drone to ensure accurate readings.
2. How do I initiate a return to home (RTH) procedure?
To initiate a return to home procedure, press the RTH button on
the controller. The drone will start flying back to the recorded
Home Point. The controller will emit a beep-beep sound every 1.5
seconds during the RTH procedure. Press the RTH button again to
exit the RTH procedure and regain control of the drone.
3. How do I take photos and videos?
To take a photo, press the camera button on the controller. The
camera will capture a single photo. To record a video, press the
video button on the controller. The camera will start recording
video. Press the same button again to stop recording.
4. How do I adjust the speed of the drone?
The low speed is the default setting. If you want to switch to
low speed, push the gear to the right on the controller. You will
hear a beep indicating that the drone is now at low speed. If you
want to switch to fast speed, push the gear to the left. You will
hear two beeps indicating that the drone is now at fast speed.
4
W80 Instructions For Use
(Please keep and read this manual carefully before using this product.)
Get 24/7 assistance at
Use camera or QR scanner to scan Or Visit: https://attop.afterservice.vip
www.attoptoys.com Customer Service Email: attop@afterservice.vip
DISCLAIMER & WARNING
1. Please read this Disclaimer & Warning and Safety Guidelines carefully
before using our product. This product is not recommended for people under the
age of 14. By using this product, you hereby agree to this disclaimer and
signify that you have read it fully. You agree that you are responsible for
your own conduct and any damage caused while using this product, and its
consequences. You agree to use this product only for purposes that are proper
and in accordance with local regulations, terms and all applicable policies
and guidelines ATTOP may make available. 2. When using this product, please be
sure to strictly abide by the specification requirements and safety guidelines
stated in this document. Any personal injury property damage, legal disputes
and all other adverse events caused by the violation of the safety
instructions or due to any other factor, WILL NOT be ATTOP’s responsibility.
SAFETY GUIDELINES
Check Before Using: æThis product is a high precision drone that integrates
various electronic stability and control mechanisms. Please be sure to set up
this drone carefully and correctly to ensure safe, accident-free operation.
çPlease be sure that the batteries of the drone and controller are clean,
undamaged and, fully charged. èPlease be sure that all the propellers are
undamaged and are installed in the correct orientation.
-01-
é Please do a thorough check of the product before each use. Inspect the
integrity of the parts, any signs of cracks and wear of the propeller, battery
power and effectiveness of the indicator, etc. After doing a complete check,
if any issue is found, please stop using the product until the issue has been
solved.
Flight Environment:
Fly in Open Areas Maintain Line of Sight
Fly Below 390 feet (120 m)
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Avoid flying over or near obstacles, crowds, high voltage power lines, trees,
South Pole and North Pole, base station. DO NOT fly near strong
electromagnetic sources such as power lines and base stations as it may affect
the onboard compass.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – –
Don’t use this drone in adverse weather conditions such as rain, snow, fog,
and wind.
-02-
Operation Requirements
æ Please don’t use this product to follow any moving vehicles. ç During the
flight, only turn off the motor in case of an emergency. è As battery becomes
low return the drone back to your starting point. é This product should not be
used while drinking alcohol, if you are feeling fatigued, taking medicine, or
feeling any physical discomfort. ê Beware of the noise volume the drone
produces. Keep your distance to avoid ear damage.
ë Stay away from the rotating propellers and motors.
ì Don’t fly in the No-Fly Zone.
í Don’t touch the Gimbal.
Use of Gimbal:
æ The Gimbal is detecting rough 10 seconds after compass calibration. When the
Gimbal indicator light is solid on, it indicates that the detection completes.
ç Do not touch the Gimbal. è If the Gimbal getting stuck 5 times or more, it
will be out of running and the Gimbal indicator light will be solid on. Please
reboot the drone.
Use of Battery:
æ Please ensure batteries are fitted in the correct orientation as shown in the instruction manual. ç Avoid short circuits by fitting the batteries incorrectly, and do not crush or squeeze the batteries as this could carry the risk of an explosion. è Do not mix new and old batteries as this can lead to a poor performance of the product.
-03-
é Dispose of used batteries carefullyDo not litter. ê Please keep dead
batteries away from heat and fire. ë If the device is not going to be used for
an extended period of time, remove batteries to prevent potential damage from
battery leakage. ì It is recommended to only use the USB charging cable that
comes with the drone to charge the battery. í Don’t connect the battery
directly to wall outlets or carcigarette lighter sockets. î Don’t attempt to
disassemble or modify the battery in any way. ï Don’t use the battery if it
gives off an odor, generates heat, becomes discolored, deformed, or appears
abnormal in any way. If the battery is in use or being charged, remove it from
the device or charger immediately and discontinue use. 11 Don’t pierce the
battery casing with a nail or other sharp object, break it open with a hammer,
or step on it! 12 Always charge the batteries in a fireproof container and
away from combustible materials. Don’t charge the batteries on surfaces that
can catch fire. This includes: wood, cloth, carpet, or in the application’s
device. 13 Don’t immerse the battery in water or allow it to get wet. 14 Don’t
solder battery terminal directly. 15 Keep the battery out of the reach of
children or pets. 16 Don’t short-circuit the battery by connecting wires or
other metal objects to the positive(+) and negative(-) terminals.
Li-Po Battery Disposal & Recycling
Waste Lithium-polymer batteries must not be placed with household trash.
Please contact local environmental or waste agency or the waste agency or the
supplier of your model or your nearest Li-Po battery recycling center.
-04-
MAINTENANCE
æ Clean the product after each use with a clean, soft cloth. ç Avoid prolonged
exposure to direct sunlight and avoid buildup of heat on the drone. è This
device is not waterproof and must not be submerged in water under any
circumstance. Failure to maintain the device completely dry will result in the
failure of the unit. é Check the charging plug and other accessories for signs
of damage frequently. If any part of the device is damaged, refrain from
flying until maintenance can be carried out.
PACKAGE CONTENTS
×1 Drone
×1 Controller
×2 Drone Battery
Propeller
×8
×1
USB Charging Cable with Charge Hub
-05-
×1 Screwdriver
DRONE’S DETAILS
Propeller A
TOP
Propeller B Power Switch
Battery
HD Camera (Gimbal)
Propeller A
BOTTOM
Propeller B
Lights
-06-
CONTROLLER DETAILS
Controller Functions
Antenna
TOP
Phone Holder
ON
OFF
LED Screen
Power Switch
Left Joystick
Gyroscoper Calibration
Unlock Take off Landing
Right Joystick Return to Home
Handgrip
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – BACK
Take Photo
Record Video
Low/Fast Speed
Camera Angle Adjustment
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
FRONT
Charge -07-
Screen
1 23 4
5 67
8
10
12
9
11
13
1. Gyroscope calibration 2. Flight signal 3. Compass calibration 4. Return to home
5. Drone battery energy 6. Take photo/ 7. Controller battery
video
energy
9. Distance
10. GPS status 11. GPS signal
13. Throttle switch (Mode 1 left throttle/Mode 2 right throttle)
8. Height 12. Low/Fast
speed
·Left/Right Throttle Swift The controller defaults the left throttle. To
switch it to the right throttle, turn off the controller, then, long press the
‘ button and turn on the controller at the same time.
MODE 2′ showing on
the LED screen means it switched successfully.
If need to change back to left throttle, just reboot the controller.
-08-
·GPS Mode Switch
When turning on the controller, the default mode is the GPS Mode. Check the
icon on the controller screen to confirm GPS status.
·Return to Home
Press the button to start the RTH. The controller emits a “beep-beep” sound
every 1.5 seconds as the drone flies back to the recorded Home Point. Press
the RTH button again to exit RTH procedure and regain control of the drone.
·Unlock/Lock Press the button ” ” then the motor will rotate. Press the red button ” ” again, the motor will stop rotating and the drone will be locked. ·Photo/Video
Press the camera button on the Controller, the camera takes one photo. Press the same video button on the Controller, the camera will take the video. Press again to exit shooting.
·Speed Switch
Low speed is the default setting.
Push the gear ”
” to right on the Controller and you will hear a
“beep “, indicating the drone is at low speed.
Push the gear ”
” to left and you will hear two beeps, indicating
the drone is at high speed.
-09-
Controller Operation
Left Joystick
Left throttle
Up
Ascend
Down
Descend
Left
Right
Rotate Left
Rotate Right
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – –
Right Joystick
Up
Forward
Down
Left
Right
Backward
Fly to Left
-10-
Fly to Right
Controller Operation
Left Joystick
Right throttle
Up
Forward
Down
Backward
Left
Right
Fly to Left
Fly to Right
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – –
Right Joystick Ascend
Up
Down
Left
Right
Descend
Rotate Left -11-
Rotate Right
INSTALLATION Drone Battery
Installation: Push the battery into the battery compartment of the drone. Make
sure it “clicks” into place indicating the battery is firmly installed.
Attention: The battery should be installed firmly. Failure to do so may affect
the flight safety of your drone. The drone may crash due to a power-cut during
flight.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – –
Removal: As shown above, press and hold the locks on both sides of the battery
at the same time to remove the battery.
-12-
Installing TF Card
TF
As shown in the above figure, please insert the TF card (needs to be purchased
separately) into the TF card slot. A “click” signifies it is inserted
correctly. It will indicate memory card capacity in “SD Card testing SD ” of
APP interface, that means the card was indentified.
1. Click the SD card testing will delete all contents in the SD card and
connot be recovered. Please be careful before confirmation. 2. The original
pixel-sized pictures and videos will be stored on the TF card.
C- -o- -n- t- r- o- -l-le- -r- B- -a- -t-t-e-r-y- – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – – – – –
Charging Cable for Controller
USB Adapter (5V/2.0A)
Low battery warning
When the controller battery energy icon
is flashing and controller
handle emits a “beep” alarm sound every 3 seconds, indicating that the
controller power is too low. The controller needs to be charged at this time.
Tips: Please turn off the controller before charging.
1. Connect the USB cable to a USB socket such as a mobile power supply. 2. Connect the controller with the USB cable and controller handle emits a “beep” sound. Flashing controller battery energy icon indicates charging status. Charging is completed when the icon is solid.
Notes 1. Charge only by USB cable of factory provided (Type C). 2. Use a power
supply with standard output voltage 5V and current greater than or equal to
2A, otherwise there is a risk of overloading the USB cable and battery. A full
charge takes approximately 90 mintutes.
-13-
Propellers
Installation
A HEAD B
B
A
The drone will not fly unless the correct propeller is installed on the
correct motor shaft. See illustration above. An “A” or “B” is printed on the
back of each propeller. Lock the propeller to the motor shafts with screws
rotating each screw clockwise.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – –
Removal
For propeller removal, use the screwdriver (provided) to rotate counter-
clockwise and remove propellers.
-14-
Phone Holder 2 1
æ Separate the Mobile Device Holder by pulling out 2 from 1 of
controller. ç Adjust the Mobile Device Holder for a tight grasp of your phone.
-15-
CHARGING
Charging Cable for Drone Battery
USB Adapter (5V/2.0A)
æ Connect the USB cable to a USB socket such as a mobile power supply (Use a
power supply with standard output voltage 5V and current greater than or equal
to 2A, otherwise there is a risk of overloading the USB cable and battery).
Connect the charger with the USB cable, and then connect the battery with the
charger. The charger’s LEDs begin flashing. When all four LEDs become solid,
full charging is completed. ç The charging time of a single battery is 4~6
hours.
1. Charge only by USB cable of factory provided (Type C). 2. Before charging,
please carefully review the “Use of Battery” section contained in “SAFETY
GUIDELINES”.
-16-
OPERATION GUIDE Downloading App
Scan the QR code, corresponding to either App StoreTM or Google TM Play Store
and download the ” Attop View ” application for free. Required Operating
Systems: iOS v8.0 and later / Android v4.3 and later Tip: Please use a
smartphone that can support receiving 2.4G and 5G WiFi signals.
Unfolding the Drone
HEAD
To unfold the drone by following the steps below. Step 1: Unfold the front
arms. Step 2: Unfold the rear arms and place the drone on a flat, level
surface. Head should face forward.
CONTACT US
Please do not hesitate to contact us if you need further support. Customer
Service Email: attop@afterservice.vip
-17-
Pairing
ON
OFF
æ First, press the drone Power Switch and quickly release. Then, press again and hold for approximately 2 seconds. The drone will emit a sound and the battery LEDs will brightly illuminate indicating it is now powered up. Place the drone on a flat, level surface with the head facing forward. ç Turn on the switch on the controller by sliding it to the top. Once the controller emits “beep-beep” sound, it confirms that the drone and controller are now successfully paired.
1. If pairing fails, please restart the drone, press and hold the
button and then turn on the power of controller.
2. Please operate pairing between drone and controller before
connecting WiFi signal.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – –
Connecting to Wi-Fi
æConnect your smart phone to the Wi-Fi network created by the drone.
Check the drone’s status in the “Attop View”
app.
ç Your smartphone will launch a search of the available Wi-Fi networks:
W80-XXXXXX
è Select the Wi-Fi network: W80-XXXXXX é Wait for several seconds until your
smartphone connects to the drone’s Wi -Fi network. This connection is
generally represented by the Wi-Fi logo appearing on your smartphone’s screen.
-18-
ê Launch the Attop View application.
The connection between your smartphone and the drone will be
established automatically.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Calibrating the Compass
Attentions:
° Push Left Stick to top right corner and Right Stick to top left corner
simultaneously to activate Compass calibration (Pic), when operate the drone
and app at first time. ° Compass calibration will be activated automatically
after rebooting 30 times. ° Retrun the drone when the app warns “Geomagnetic
anomaly, please leave the source of interference and recalibrate the
compass!”. Please move to open space without interference to operate the
drone. Push left stick to top right corner, right stick to top left corner
simultaneously for activate compass calibration.
After successful pairing, the drone LED lights flash rapidly. You can now
begin compass calibration.
Front lights
flash rapidly
flash slowly
Step 1:
Rear lights
Now, the app interface displays the above diagram and the Compass
calibration icon in controller screen is flashing. Hold the drone horizon-
tally and rotate the drone in approximately 3 complete circles. When
completed, the controller emits a “beep” sound and the drone’s LED lights
flash slowly.
-19-
Front lights
flash slowly
Solid
Rear lights
Step 2: Now, the app interface displays the diagram. Hold the drone vertically and rotate the drone in 3 complete circles. When completed, the controller emits a “beep” sound and the drone’s LED lights become solid and the Compass calibration icon in controller screen is solid on.
Attentions: °Now the Gimbal is detecting for roughly 10 seconds. Please do not
touch the Gimbal. °Horizontal calibration is carried out after compass
calibtation. °Searching GPS signal after horizontal calibration completed,
indicates ” GPS signal searching…..” in the app interface, please wait
patiently. °When it indicates “Equipment connected (GPS Mode)” and “Ready to
Fly” in the app interface, it means that the drone receives the GPS signal.
Now, the rear LED’s of the drone will flash twice per second.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – –
Horizontal Calibration
HEAD
3 S
flash rapidly
Solid
-20-
Now, the app interface displays the diagram. Place the drone on a flat
level surface and
Slide right to confirm . The LED lights of the drone will
flash rapidly for about 3 seconds. When completed, the front and rear
lights turn solid. Or press the Gyroscope calibration switch ”
” on
the controller. The LED lights of the drone will flash rapidly for about 3
seconds. When completed, the front and rear lights turn solid.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Unlocking the Motor
Please unlock the motor before take-off.
Press the button ” ” , the motors rotate. æ Unlocking the motor Please unlock
the motor while it indicates “Equipment connected (GPS Mode)” and “Ready to
Fly” in the app interface. ç If you do not perform any operation approximately
10 seconds after unlocking the drone, the motors will stop rotating.
-21-
Locking the Motor
Pic. 1
Press the button ” ” again, the motor will stop rotating and the drone will be
locked. (Pic.1)
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – –
One Key Take-off/Landing
æ
ç
Take-off æ After unlocking the drone, press the ”
Landing ” button on the controller
and the drone will automatically take off and hover at 1.5m altitude. Or
press the ” ” in the app interface, then ”
Slide right to confirm “after
unlocking the motors.
ç When the drone is flying, press the ” ” button on the controller,
the drone will fly back to the Home Point and automatically land on the
ground.
Tip:
Before flying, make sure the GPS Mode is activated in case the
drone gets lost!
-22-
FUNCTION DETAILS Camera Angle Adjustment
90°
During flight, you can dial the wheel left/right to tilt the camera up/down.
(The gimbal has a 90° tilt range.)
Please do not touch the camera gimbal directly. Doing so may cause damage!
-23-
Low Voltage RTH
When the drone’s lights flash slowly, the ”
” symbol is displayed in
the controller screen Then the First Low Voltage RTH will be triggered. The
controller will emit “beep-beep” alert every 6 seconds. The drone will return
automatically in the following two conditions: (At this time, the drone can only fly within a safe range of its height no more than 20m and its distance no more than 30m.)
a. When the flight distance is more than 30m, the drone will fly automatically into the electronic fence (H 20m x D 30m) and stay the current distance, then exit the First Low Voltage RTH If the flight distance is equal to 30m, the drone will stay current distance, then exit the First Low Voltage RTH
D30m Forward H20m Descend
30m
Home Point
20m
b. When the flight altitude is higher than 20m, the drone maintains its current height and then flies automatically into the electronic fence (H 20m x D 30m), then exit the First Low Voltage RTH. If the flight altitude is lower than 20m, the drone will ascend to 20m and fly automatically into the electronic fence (H 20m x D 30m), then exit the First Low Voltage RTH.
Flight Altitude 20m Flight Distance 30m Home Point Range: Radius 1.5m
-24-
ç If the drone’s lights begin to flash rapidly the ”
” symbol will be
displayed in the controller screen and the controller will emit
“beep-beep-beep” alert every 3 seconds. The Second Low Voltage RTH is
automatically triggered. Drone will return automatically.
a. When the flight distance is 30m, the drone will fly automatically to Home Point and land on the ground. If flight distance is less than 5m, the drone will maintain its distance and then land on the ground.
Landing
30m Forward 20m
Home Point
b. When the flight altitude is equal to 20m and the distance is more than 5m , the drone will maintain its current altitude, fly automatically to Home Point and then land on the ground. If the flight altitude is lower than 20m and the distance is more than 5m, the drone will ascend to 20m and fly automatically to the Home Point, and then land on the ground.
Flight Altitude = 20m Flight Distance = 30m Home Point Range: Radius 1.5m
1. During the Second Low Voltage RTH, the drone can not be controlled to ascend and descend. But you could operate the Right Joystick to change the landing position (adjustment range 10 meters). 2. The drone cannot avoid obstacles.
-25-
APP OPERATION INSTRUCTION Operation Interface
3D
VIEW
3D VR
Waypoint flight
Follow me
Surrounding Lock
Find drone
Music
Home page
Flying record
Drone signal
Satellite
Battery
Setting
Take off
Landing
Return Video
Function
SD Card testing
Photo
Shutter button
Filter
Zoom
Media
H: N/A D:N/A V.S:N/A H.S:N/A
Flight data
-26-
Setting Parameters
Click the ”
” icon to enter the setting interface (as shown in the figure
above). You can set a limited flight range:
1. Maximum flight distance: 66~3281 ft / 20~1000 m.
2. Maximum flight altitude: 66~394 ft / 20~120 m.
3. Maximum flight radius: 16~164 ft / 5~50 m. (The Point of Interest’s flight
radius is set at 16 ft by default.)
4. Beginner Mode (default setting): The default flight altitude is 98 ft / 30 m.
The default flight distance is 98 ft / 30 m.
.
You can also start calibration of the Gyroscope and Compass in the setting
interface (as shown above).
-27-
Follow Me
When the Follow Me function is enabled, the drone will follow the GPS in
your smart phone to follow you wherever you go.
1. Ensure the drone’s flight range is within 30m.
2. Click the” ” icon on the app interface, then click ” ” to enter the
Follow Me function. Next”
Slide right to confirm ” the drone will now follow
the phone’s coordinates.
3. To exit Follow Me Mode, simply click the ” ” icon on the app interface
again.
Common Issues : æFollow Me mode may be difficult to activate if the phone’s
GPS signal
is too weak. This could be due to the signal loss from surrounding
buildings, trees, or congestion from too many mobile phones in the area. çUse
in an open area and be mindful of your surroundings. The drone
is NOT equipped with obstacle avoidance.
-28-
Waypoint Flight
It is recommended to enlarge the map if you want to use Waypoint.
2 1
3 4
1. Click the”
” icon on the app interface, then click ”
” to
enter the Waypoint flight function.
2. Draw a line on the map to create a path (maximum 15 paths). Click
” GO ” icon to submit the route, then ”
Slide right to confirm “. The drone
will now fly along the path according to the points connected on the
map. 3. Click the ” – ” icon to deduct the path.
4. Click the ” ” icon to delete all paths to stop waypoint flight.
5. Exit the Waypoint flight mode by clicking the live transmission image .
6. If the flight path submission fails, you can choose to re-submit or exit
again.
7. The drone will fly back to the starting point after executing flight path.
cDO NOT fly the drone towards people, animals, or small/ fine objects (e.g.
tree branches and power lines) or transparent objects (e.g. glass or water).
cThere may be some deviation between the expected and actual flight path.
-29-
Point of Interest
R
1. Click the” ” icon on the app interface. Click ” ” then
”
Slide right to confirm “to enter the Point of Interest function.
2. The drone will record its flight position the moment while you enter
this function of the Point of Interest. The drone will now continuously
circle clockwise around the preset point. (The default radius is 5m. To
change the point, please click “Setting ” –“Flight Radius
” to
reset.)
3. To exit Point of Interest mode, simply click the ” interface again.
-30-
” icon on the app
Gimbal Adjustment
1. Put the drone on the surface ground and click the ” ” icon on the app
interface and select the ” “. Click `Gimbal calibration’, then the Gimbal starts
detecting and calibrating automatically.
2. Click “Rolling adjusting” then click ”
” to adjust Gimbal rolling. (Pic.1)
3. Click “Pitching adjusting” then click ”
” to adjust Gimbal pitching. (Pic.2)
4. Click “Reset” to restore the default setting.
cDo not touch the Gimbal when it’s in detecting.
(Pic.1)
(Pic.2)
-31-
Unit Conversion
1. Click the “Setting
” icon on the app interface. Click ” ” then
select the unit that you need.
2. “Metric (m/s)” is the default unit.
Take Photo/Video
1. Click the ”
” icon to switch between photo and video mode.
2. When the shutter button is ” “, click once to take a photo.
3. When the shutter button is ” “, click once to start recording, and click
again to stop recording.
4. Click the ”
” icon to enter the Media folder for viewing Photo and
Video.
Photo Video
Pic 3
When the TF card is not installed, the photos or videos will be stored
directly in the APP photo album (Pic.3) and smartphone.
Tips: The app needs your access permission to phone album when first
activating this function.
When the TF card is installed, the photos or videos are stored in the TF
card .
-32-
Take Music Video
Click the” ” icon on the app interface, then click ” ” and then click “Click
to Select Music”. Click ” ” after selecting the music you prefer. And click ”
” to recording video.
The music video is saved in the app and phone Gallery.
DRONE STATUS INDICATOR
InInddiciactaotroSrtSattautsus
Meaning
F
R The drone’s LED lights flash rapidly.
Drone is connected to the controller, Compass Horizontal Calibration begins.
F
R The drone’s LED lights flash slowly.
Compass Horizontal Calibration has completed and begun Compass Vertically Calibration.
Front lights turn solid blue, rear lights Compass Calibration has completed.
F
R turn solid green.
No GPS signal or weak GPS signal.
F
R
Front lights
lights turn flash twice
spoelirdsbecluoen, dreargreenGood
GPS
signal.
F
R
Front and rear lights flash rapidly when pressing the calibration button.
Currently calibrate the Gyroscope.
Front and rear lights flash slowly while The First Low Voltage RTH will be
F
R flying.
triggered.
Front and rear lights flash rapidly while The Second Low Voltage RTH is
F
R flying.
automatically triggered.
-33-
SPECIFICATIONS
DRONE Model: W80 Weight: 545 g / 19.22 oz Max Flight Time: Approx 30 minutes
Operating Temperature Range: 32°F to 104°F Dimensions: 115 x 175 x 80 mm
(Folded) 285 x 225 x 80 mm (Unfolded)
DRONE BATTERY Capacity: 2500 mAh Voltage: 11.4 V Battery Type: Li-Po Energy:
28.5 Wh Charging Power: 34.2 W Charging Temperature Range: 41°F to 104°F (5°C
to 40°C) Charging Time: 6 hours
BATTERY CHARGER Input: 5V 2A (Type C) Output: 11.4V 1-2A
-34-
CONTROLLER Operating Frequency: 2.4 GHz MAX Transmission Distance: 1000m
(outdoor and unobstructed) Battery: 3.7V 500 mAh. Charging Time: Approx. 90
mins Operating Temperature Range: 32°F to 104°F
CAMERA Camera frequency: 5 GHz Resolution: 4K Lens: FOV 90° FPV Distance: 800m
(outdoor and unobstructed) Photo: JPEG Video: MP4 MAX Supported TF Cards: 128
GB (Not included) Controllable Range: Pitch: -90° to 0° Operating Temperature
Range: 32°F to 104°F
USB CHARGING CABLE Voltage: 5 V Ampere: 2 A
-35-
TROUBLESHOOTING
No.
Problem
Solution
When the drone is powered on, The drone is in the Gyroscope
1
the indicator light keeps flashing Calibration Mode. Please place
rapidly.
the drone on a flat, level surface.
The drone cannot hover after Place the drone on a flat, level
2 takeoff and tilts to one side.
surface and repeat Gyroscope
Calibration.
3 The drone vibrated in flight.
A propeller may be damaged. Please inspect and replace any damaged propeller with a new one.
The drone could not be unlocked The drone battery voltage is too
4 and the drone’s lights flashed.
low. Please fully charge the battery.
CONTACT US
Please do not hesitate to contact us if you need further support. Customer
Service Email: attop@afterservice.vip
-36-
BATTERY WARNING: 1. Failure to follow all the instructions may result in
serious injury, irreparable damage to the battery and may cause a fire, smoke
or explosion. 2. Always check the battery’s condition before charging or using
it. 3. Replace the battery if it has been dropped, or in case of odor,
overheating, discolouration, deformation or leakage. 4. Never use anything
other than an approved Li-Po battery charger. Always use a balancing charger
for LiPo cells or a Li-Po cell balancer. 5. The battery temperature must never
exceed 60°C (140°F) otherwise the battery could be damaged or ignite. 6. Never
charge battery on a flammable surface, near flammable products or inside a
vehicle (perferably place the battery in a non-flammable and nonconductive
container). 7. Never leave the battery unattended during the charging process.
Never disassemble or modify the housing’s wiring, or puncture the cells.
Always ensure that the charger output voltage corresponds to the voltage of
the battery. Do not short circuit the batteries. 8. Never expose the Li-Po
battery to moisture or direct sunlight, or store it in a place where
temperatures could exceed 60°C (such as car in the sun). 9. Always keep it out
of reach of children. 10. Improper battery use may result in a fire, explosion
or other hazard.
-37-
11. Non-rechargeable batteries are not to be recharged. Rechargeable
batteries are only to be charged under adult supervision. 12. Different types
of batteries or new and used batteries are not to be mixed. 13. Batteries are
to be inserted with the correct polarity. 14. The supply terminals are not to
be short-circuited. Regular examination of transformer or battery charger for
any damage to their cord, plug, enclosure and other parts and they must not be
used until the damage has been repaired. 15. The packaging needs to be kept
since it contains important information. 16. The toy is only to be connected
to Class II equipment bearing the symbol.
-38-