Attop X-Pack 18 1080P FPV Drone User Manual

Attop X-Pack 18 1080P FPV Drone

X-PACK 18 Operation Manual
(Suitable for wide indoor environments operation and wind power less than Force 2 outdoor environments) Suitable for 14 years old and above

Get 24f7 assistance at

Use a camera or QR scanner to scan Or visit https://attop.afterservice.vip  www.attoptoys.com Customer Service Email: support@attoptoys.com

Package Contents

Charging

Low battery warning
When the drone is flying, the indicator lights on the drone are flashing, and the remote control handle emits a “beep” alarm sound, indicating that the drone power is too low. At this time, the drone needs to return and charge.

Charging Guide for battery

1. Connect the USB cable with the power supply, and the USB LED is solid on, indicating the USB cable is powered on.
2. Connect the battery with a USB cable. If the USB LED is solid on, the charging is complete:!. Otherwise, it means charging. Please use the drone when fully charged.

Note: Use a power supply with a standard output voltage of 5V and current greater than or equal to 2A, otherwise there is a risk of overloading the USB cable and Battery. The flight time is about 9-10 minutes and the charging time is about 120 minutes.

INSTALL

1. Open Up all 4 blades for the drone
   • This aircraft is a folding structure please open up all four propellers before taking off.
2. Battery Installing
3. Insert the battery into the specified position.
4. To disassemble, press the battery buckle button, and pull it back to take it out.

  * Insert 3xAAA battery into the specified position.![Attop X-Pack-18-1080P-FPV-Drone-fig-5](https://manuals.plus/wp-content/uploads/2022/09/Attop-X-Pack-18-1080P-FPV-Drone-fig-5.png)

3. Mobile Device Holder Using
4. Pul I up the position of controller.
5. Adjust the Mobile Device Holder up and place the mobile onto the holder.

Remote Controller

1. Speed switch
2. Left stick (Altitude Control I Turn UR)
3. power switch
4. One key take off
5. Circle Fly
6. One key landing
7. One key return
8. Headless function
9. Right stick (Movement control)
10. Gyro calibration
11. Forward trimming
12. Right trimming
13. Backward trimming
14. Left trimming
15. Filming
16. Take Photo

How To Fly

1. Switch On the Power

2. First power on the drone (Keep pressing for 2-sec and place it on flat ground or surface.)

3. Power on the Remote

4. Frequency pairing

   • After powering on the drone, both indicator lights on the drone and controller are flashing. Push the Left stick to the top, and then down to the lowest, after 2 secs, the indicators will go steady, which means the frequency paired successfully.

5. Gyroscope calibration

   • Press the Calibration button for the gyro calibration. (For the aircraft to fly more stable if operate this step before activating motors every time).

6. Activate motors for taking-off
   Push the Left stick to the lowest left corner, and meanwhile push the right stick to the lowest right corner, (Or just push the left stick to the top) then the motors of the drone start rotating.

7. Take off/ Landing
   After activating the motors, press “One key take off (or push up the Left stick directly) to fly. Press “One key landing” (or keep pushing down the Left stick directly) to land.

Emergency Stop

In case of emergency status, push the Left stick to the right corner, meanwhile, push the Right stick to the left corner at the same time, and the drone will immediately stop and drop off.

Using the Remote Controller

Aircraft Functions

TRIMMING ON THE FLYING ACTIONS

• AdJustment FronUBackWard for deviated flying to  If It leans forward, presses the down trimmer.
• Adjustment for deviated flying sideward If it leans left, press the right trimmer. If it leans right, press the left trimmer.
• 360° Flip Function

1. Short press the Right Stick
2. Push the stick to right, the drone will rotate 360° in right direction
3. Short press the Right Stick
4. Push the stick to left, the drone will rotate 360° toward the left direction.
5. Short press the Right Stick
6. Push the stick to the bottom, and the drone will rotate 360° in the back direction.

Speed Adjustment

The drone is set to low speed by default. Press the Speed button to change the speed gear while flying. There are 3 gears, each gear has a “beep” notice voice, the default speed is the most slowly one, then press one time you will hear “beep beep”, then go into the second speed gear, and press again with “beep beep beep’ to the final fastest speed.

Remark: Beginners would be suggested to use the default speed firstly to play until skillful.

Press the Take photo button. Please make sure to open the app on your smartphone before using it, then you can review the photos taken in the media file of the app or in your mobile image file.

Note : The Video and Take Photos are to switch only for the WiFi version.

Headless Mode Function

Press the Headless function button, when the indicator lights slowly flash, which means it is in Headless Mode. Press the Headless function button again, when the indicator lights stop flashing, which means deactivating Headless Mode.

Users are recommended to stay the same orientation as the drone head is facing when the drone takes off. Under Headless Mode, the forward direction is the direction that the head of the drone faces when the drone takes off. In order to make sure the users can tell the drone’s direction, we suggest that users better to stay in the same orientation as the drone facing when it takes off. Then no matter which direction the head is facing, the drone will lock the controlled direction as the remote controller, easy to control back the drone.

0ne key return

The remote toward the tail of the drone and presses the button, then the drone will fly toward its back following a path parallel to the remote direction. The LEDs on the drone keep flashing when the drone is returning.
Press the button again or move the Right Control Stick, forward to cancel this function, or the drone will keep flying back.

Note: toward the Please tail of drone activate before Headless activate function the and Return make futuretion. the remote

Aircraft Parameters

• Length of the main wing: 152mm
• Aircraft: 190X226X73mm
• Total weight: 148g±2g
• Battery: 3. 7V 11 00mAh
• Charging time: About 120 mins
• Flight time: 9-10 mins
• Gyroscope: built-in
• Working temperature: -10° c to 40°C
• Remoter controller: 2.4G
• Motor: 85X20 4pcs

Camera Parameters

• TF card support: NO
• Camera Lens: 1080P

Remote Controller Parameters

Wi-fi Transmission Range 60-80 meters (in a wide open area with no electromagnetic interference)

• Working frequency:   2.4G
• Battery: 3xAAA

FAQ

Battery Using Attention

Matters needing attention

1. Rechargeable batteries are to be removed from the toy before being charged.
2. Nor>-rechargeable batteries are not to be recharged.
3. Rechargeable batteries are only to be charged under adult supervision
4. Only used to charge 2S Li-ion or Li-polymer battery pack. if not, the charger or battery may be damaged.
5. During charging, the charger should be put in dry and ventilated place and far away from heal sources and inflammable and explosive substances.
6. Never in-mediately charge your battery pack as seen as the flight is finished, or when its temperature doesn’t cool down. Otherwise, the battery will take a risk in swelling, even a fire.
7. Ensure the correctness of polarity before connecting the battery to the charger.
8. Avoid drop and violence during the process of charging. drop and violence will result in an internal short circuit of the battery.
9. For the sake of safety, please use the original charging equipment and battery pack. please change the new one in lime when the flying time is becoming shortened due to long time usage.
10. If rt is retained in the charger for a long time after saturation, the battery may automatically discharge. When the charger detects that the voltage of individual cells is lower than the rated voltage, will recharge until saturated. Frequently charging and discharging will shorten the lifetime of your battery pack. It is advised that please cut off the power and took off the battery after the charging is saturated.

Maintenance of battery pack

1. The battery pack should be put in dry and ventilated place. The storage temperature of the environment is ranged from 18°C to 25°C.
2. Please avoid frequent charging and excessive discharging of the battery pack in order to prolong the life cycle.
3. It is a must to maintain the battery pack before long. term storage. That is to charge the battery to the level of 50-60% saturation.
4. If the storage term is over 1 month, it is advised to monthly check the voltage of every cell of the battery pack. The voltage of every cell should be not less than 3V. Otherwise, please refer to the above article (3)
5. From the viewpoint of protection, new battery pack should be motivated before usage. That is to charge and discharge 3-5 times, but discharge is not less than the level of 70% saturation. This process will make the battery IWetime longer and the voltage more stable.

SAFETY AND PRECAUTIONS

CAUTION

Remote-Control mo dels of quadcopters are dangerous merchandise. Their flight must be operated away from the crowd. Such factors as man-made improper assembly or mechanical damage, poor control of the electronic equipment, as well as unfamiliar manipulation may le ad to unexpected flight accidents, such as uncontrolled flight and aircraft damage. Users are advised to pay attention to flight safety and understand that they are held responsible for ny accidents caused by negligence.

FORBIDDEN

Special drones for Indoor and outdoor should stay away from barriers.

This product is a remote-control drone, that is suitable for in indoor use and outdoor environments (the outdoor wind power less than Force 2). To fly this drone, plea se choo se appropriate obstacle-free indoor and outdoor sites with proper distance kept from the crowd or pet animals. Please don’t operate the product in any unsafe environments, such as places of heat, wires, power supply, etc., so as to prevent the quadcopter from the risks of fire and electric shock resulting from a collision, ditching, and entangling of the drone.

usage of the lithium battery

ithium batteries are more dangerous than others. Be sure to read carefully and follow the following precautions before using it. We will not be held responsible for any damages caused by any improper use of the battery. To avoid the danger of explosion or fires, it is forbidden to use other chargers than the ones made by our factory. Such actions do ne to the battery as impact, dismantling, reverse connection of the positive and negative poles, and burning are forbidden. Avoid metal objects from contacting the positive and negative poles of the battery, which may cause a short circuit. Please prevent sharp items from piercing the battery, and avoid the risk of battery fire. Please be careful when charging the battery.

Make sure that the battery is charging within your sight Keep it out of the reach of young children SO as to avoid dangers. Don’t charge the battery when the battery is heated after use. Otherwise, it may cause the battery to expand, change, explode or even catch fire, threatening the safety of lite and property. To dispose of the battery. please recycle the battery in strict compliance with the waste disposal laws and regulations of local countries or regions in order not to pollute the environment.

Away from moist environments
The interior of the aircraft is also composed of many sophisticated electronic components so it must absolutely be kept away from moisture or water vapor. Don’t operate the aircraft in the bathroom or on rainy days; otherwise, water vapor may get inside of the aircraft and cause mechanical parts and electro nic components to malfunction leading to expected accidents.

Never misuse the product
Please do not disassemble or modify the product. For any upgrade, repair , or maintenance, please use the parts specified in our catalog to ensure the safety ot the structure. Please make sure the product is used within the limits of operation. Don’t overload the product, and don’t use it in any other illegal ways than pre-scribed by safety concerns and laws.

Safe usage  of the battery
Batteries are to be inserted with the correct pol a rity. The supply terminals are not to be short-circuited. Different types of batteries o r new and used batteries are not to be mixed. The exhausted batteries are to be removed from the toy F or long time storage, please ake them out to pre v en t b a ttery le aka e. Please dispose of abandoned batteries in accordance to the laws and regulations of the corresponding region to prevent pollution to the environment.

Keep away from the source of heat The aircraft is mostly made of PA fiber or polyether line as well as other main materials for electronic products. Therefore, it must be kept from the source of heat and exposure to sunlight to avoid possible damage of deformation or even meltdown due to high temperatures.

Never operate the product alone
This product is suitable for users over 1 4 years old. Si n c e the re mote- control quadcopter may pose a certain degree of difficulty guilty for le learners at the beginning, it is recommended for it to be operated under the guidance of experienced people for the sake of safe flight.

Disclaimer

Please read this manual carefully before using our product This product is not recommended for people under the age of 14. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any damage caused while using this product, and its consequences. You agree to use this product only for purposes that are proper and in accordance with local regulations, terms, and all applicable policies and guidelines ATTOP may make available.

Description of ATTOP GO drone WIFI Version

• This version of the drone comes with the WIFI Live Stream Camera.

SCAN. AND DOWNLOAD APP

How to connect the WIFI Signal

1. Download the app “ATTOP CLUB “from App Store I Google Play.
2. Power on the drone.
3. Go to the WIFI setting on the phone/device, choose the WIFI signal of the drone (X-PACK 18+ No.) , and connect it
4. Now open the app of the drone, and Slip to Select The Drone “X-PACK 18” then enjoy to play it
   Attention: When the drone is at the status of low battery, it might unable to be connected successfully.

After connecting the WIFI signal between the drone and mobile device, and open the APP, we can Slip to Select The Drone “X-PACK 18” see the screen as image above.

1. Enter to the Interface of this drone after selection.

2. Media Folder: After taking photos and videos, you can review them from this folder.

3. Ascend / Descend / Turn left / Turn right

4. Go forward / Go backward / Left side flying / Right side flying 6) Gesture control

5. Music

6. Speed mode: 30%,60%,100%

7. 360° flip

8. Headless mode

9. Gravity Control (press it to perform this function, by changing your action of shaking the device to control the drone flying)

10. Flight path mode

11. voice control

12. VR mode

13. return home page

14. On/Off for control interface

15. Switch to take a video

16. Switch to take a photo

17. Go Forward / Backward trimmer fl Left / Right side flying trimmer EMERGENCY STOP!!!

18. One key take off

19. One key landing

20. Calibration

Ready to fly

1. After connecting the WIFI signal and enter into the operation interface, press the ‘”‘ON/OFF button” to open the sticks.
2. wait for 2 seconds till the lights of the drone stop flashing then press the “Calibration button” to calibrate the drone if first time play.
3. Push the Left Control Stick to the top and then release. Now the rotors of the drone start rotating, that activate the motors. (see pie 1)
4. Press the “One Key Take Off” to fly up the drone (or push up the Left Contol Stick slowly), to take off. Press the “One Key Landing” (or keep pushing down the Left Control Stick directly) to land the drone.

APP operation method

1. Ascend/ Descend/ Turn left I Turn right

2. Go forward/ Go backward I Left side flying/ Right side flying 8 Gesture control

3. Music

4. Speed mode: 30%,60%,100%

5. 360° flip

6. Headless mode

7. Gravity Control: Switch “Gravity Sense Mode “, and wave the mobile phone as in the image shown below, the drone will move in the same direction movement.

8. Flight path mode: Press and you can draw a flying route plan on the screen, the drone will fly according to the route you designed.

9.  Voice control Unlock the motors and the rotors of the drone start rotating, then press and say “Take off ” I “Landing”/ “Forward” I” Backward”/ “Left side”/ “Right side” six voice instructions, the drone will reflect correspondent actions.
   Note: The APP needs your access allowance to use a microphone.when first activating this function.

10. VR mode: Suitable for VR glasses use. fl Return home page

11. On/Off for control interface

12. Switch to take a video

13. Switch to take photos After taking photos and videos, you can review them from the Home page Media Folder or the album file of your mobile device.
    Note: The APP needs your access allowance to the phone album when first activating this function.

14. Go Forward I Backward trimmer

15. Left I Right side flying trimmer

16. EMERGENCY STOP: ln case of an emergency, press the drone will immediately stop functions and drop off. One key take off

17. One key landing

18. calibration

Control with the remote controller (IF your drone with controller)

1. Power on the drone and power on the remote, after pairing the frequency between the remote and drone (the lights of the drone and controller become permanent), then connect the WIFI signal between your device and the drone.
2. Put the device to the clamp of the remote controller, then go to the app interface to play the FPV flying.
3. Press the “Picture” button on the interface or on the controller, to take pictures. Press the “Video” button on the interface or on the controller, to take a video. After taking you can review the files from the media folder, or from the album file of your device.

Name of App : ATTOPCLUB
Apply to IOS \ Android system (Note Apply to Android 2.3 or above such as SAMSUNG. SONY. HUAWEI and etc But cannot guarantee the phone of other brands with Android system could operate stably )

30-Day Whole Unit Warranty For Quality-Related Issue
For 30 days after the date of purchase, we take care of all quality-related issues with a REPLACEMENT.

Reminder: Be sure to operate your drone as directed.

90-Day Accessories Warranty For Any Reason
For 90 days after the date of purchase, we take care of all accessories quality-related issues with an ACCESSORY REPLACEMENT.

Reminder: Be sure to maintain your drone as directed.www.attoptoys.com Customer Service Email: support@attoptoys.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>