TRANYA Go Smartwatch User Guide

TRANYA Go Smartwatch

Get Started

Package list

Replace the band

If you buy new bands and want to replace them, firstly, flip the switch and take out the wristband, then pick up the band you like, and flip the switch into the end of the watch until you hear a click and then snap into place.

Note: Pay attention to the position of the long and short bands and the display screen, do not install them upside down.

Charge your watch
Connect the USB-charging cable to the watch according to the picture.

Wearing
Wear the device with a finger’s distance from the wrist bane and adjust the tightness of the wrist band to a comfortable position.

Power on/off

1. Long press the side button for /4-5 seconds ta power on. Or charge it to power on.
2.  Switch to the Shutdown interface. and press it to power off. Or press the side button for 4-5 seconds in the main interface to power off.

Install the App

1. Open your APP store and search “”GloryFit” to install.
2. Dr scan the following QR codes to install “61oryFit”. The QR code can be found in the Setting.

Device connection

1. Turn on the Bluetooth in your phone;
2. Open the “GloryFit” in your phone;
3. Click ‘·Device”;
4. Click ‘Add a new dev,ce·;
5. Click “Select device”;
6. Select the product model – TranyaGo;
7. Click “‘Pair’ to complete the connection.

Note: If you can’t find “TranyaGo” in slep6, please check whether the device has been selected in the Bluetooth list of your mobile phone. If so, please click “Ignore TranyaGo” and search again.

The GloryFit would save the Bluet oath address of your smart watch after the above steps. Once the GloryFit is running, the watch will be connected automatically next time.

Operation

1. Raise your hand or press the side button to light up the screen.
2. The screen will turn off without operations in 5 seconds by default. Yau can modify this default value in the GloryFit.
3. The heart rate monitoring function is on by default. You can turn it off in the GloryFit.
4. Press the side button at any time to return back.

Data synchronism

The watch can store 7 days of off-line data, and you can synchronize the data on the App homepage manually. The more data, the longer the synchronization time is. and the longest time is about 2 minutes.

App functions and settings

Personal information and exercise goals

1. Open the App GloryFit ta set your personal information.
2. Setting your avatar, name, gender, age, height and weight, which can help to increase the accuracy of the monitoring data.
3. Set your daily exercise goals.

App setting

Do Not Disturb: If the Do Not Disturb mode is on, the screen will not light up when you raise your hand, as well as brakes vibrations and message push will be off. Out of the time range, you can also set Vibration made off or Message off.

BASIC

Basic navigation
The home screen is the clack.

1. Swipe down to see the quick settings, such as Do Not Disturb, Brightness, Find the Phone, Setting.
2. Swipe up to see the notifications.
3. Swipe rig ht to see the Apps on your watch.
4. Swipe left to see the shortcut interlaces, such as Status, Heart rate, Sleep, Weather.
5. Press the side button to return.

Main page function

Switch the main interface

1. Long press the main interface for 4-5 seconds to switch.
2. Or ISettingl-[Diall to switch.

Note: You can also choose more interfaces in the Dash Board of GloryFit.

MENU LIST

Sports interface
Switch to the Sports interface, press the screen to enter the specific Sports interface. Press the side button to pause, you can choose whether to continue or exit.

Status interface
Switch to the Status interface to check the steps, distances and c.,lories. The distances and calories are calculated based on the current walking steps, the height and weight set in the App individually.

Heart Rate interface

Switch to the Heart Rate interlace, click the screen to view the heart rate data.

Note:

1. The heart rate monitoring is enabled by default. If you don’t want this function, you can turn it off in the “GloryFit” App.
2. If the heart rate monitoring function is on, the green light on the back of the watch will keep flashing.
3. The sensor should be close to the skin to avoid the effect from external light on the accuracy
4. When you find that the heart rate data is inaccura1e, you can restart the watch to correct it.

Sleep interface
Switch to 1he Sleep interface and check the sleep status. When you fall asleep, the watch will determine to enter the sleep monitoring mode automatically to calculate the length of your deep sleep/light sleep/awake time all night, and evaluate your sleep quality. You can only view sleep data on the App.

Note: The sleep date can only be recorded when you sleep with the watch.

Weather interface
Switch to the Weather interface, you can view the weather and temperature.

Music interface
You can play, pause or switch the songs playing in your cell phone.

Message interface
In the Message interface, click the main screen to view the message, slide the screen ta turn the pages. Press the side button to exit.

More

• Stopwatch: Switch to the Stopwatch interface, click to enter the timing interface. Countdown, Switch to the Countdown interface, and click to choose the time you want to count down. You can customize the time at the bottom of the page. When the time is up, the watch will vibrate.
• Flashlight: Switch to the Flashlight interlace, and press the screen to turn on the flashlight. Find the Phone, Switch to the Find the Phone interface and touch the icon, then the phone would ring.

Setting

Dial (Main interfaca): You can also press the main interface for 4-5 seconds to switch.

QR code: Scan the QR codes to install the APP “GloryFit”.

Precautions

1. Please avoid strong impact, extreme heat, and exposure to the watch.
2. Please do not disassemble, repair or transform the device on its own.
3. The use of the environment is 0 degrees -45 degrees, and it is forbidden to throw it into the fire so as not 1o cause an explosion.
4. Please wipe olf the water wi1h a soft cloth and then the watch can be used for the charging operation, otherwise, it will cause corrosion of the charging contact point, and a charging incident may occur.
5. Do not touch chemical substances such as gasoline, clean solvent, propanol, alcohol or insect repellent.
6. 6. Please do not use this product in a high-pressure and high-magnetic environment.
7. If you have sensitive skin or tighten the wristband, you may feel uncomfortable.
8. Please dry the sweat drips on the wrist in time. The strap has long contact with soap, sweat, allergies or pollution ingredients, which may cause skin allergy itching.
9. If ii is often used, it is recommended to clean the wristband every week. Wipe with a wet cloth and remove oil or dust with mild soap. It is not appropriate to wear a hot bath with a wristband. After swimming, please wipe the wristband in time so as to keep dry.

FAQ

Q: Can·t find the smartwatch when trying to select the device on the GloryFit App setting.

1. Make sure the smartwatch is on and close to your phone;
2. Make sure the smartwatch – 0 TranyaGo” is NOT on the Bluetooth list of your phones;
3. Make sure the smartwatch is not connected ta any other phones. Search again and you would find “TranyaGo” in your 6loryFit App.

Q: Is the watch waterproof?

A: It supports IP68 waterproof and dust-proof level IIP68 standard is 35 degrees below water, 1 meter below 30 minutes). Usually, you can w. .h your hands, take a cold shower or wash car with the smartwatch.

Note: But be: sure nat to enter the: steam room with your w.atd,. Such as sauna, ho1 spring, hot bath, etc

Why is the data of heart rate monitoring inaccurate?
A, To calculate your heart rate, Heart Rate Monitoring utilizes LED lights ta determine haw much green and red light is being detected from the skin of your wrist. If you don’t keep the watch close to your skin, there will be ambient light reaching into the sensor, which will affect measurement accuracy.

Why can·t I receive the message notification?

Android Phone,

• Step 1: Be .sure the watch is connected to thre phone;
• Step 2: Be .sure the ‘”GloryFit'” App j5 running in your cell phones, and keep ii running in the background;
• Step 3, Be sure the watch is not on “Do Not Disturb” mode;
• Step 4, Be sure the related reminders in the GloryFit App are on;

Note, Currently, the GloryFit App may be killed in lhe background for most Android Phones in every 10-15 minutes Regarding to a specific model of yaur phone, for example, pixel 5,  you can goagle ·how to keep APPs running in the background pixel 5″.

iPhone:

• Step 1, Restart the phone and reconnect the smartwatch;
• Step 2, There will be a popping up “Bluetooth pairing request” and clicking “Pair”;
• Step 3: Be sure the “GlcryFit'” App is running on your cell phone, and keep it running in the background,
• Step 4′. Be sure the watch is not in “Do Not Disturb· mode:
• Step 5: Be sure the related reminders in the GloryFit App are an.

Basic parameter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>