TranyaGo Smart Watch User Manual
- June 6, 2024
- Tranya
Table of Contents
TranyaGo Smart Watch User Manual
tranya.com/pages/register-product
Get Started
■ Package list
■ Replace the band
If you buy new bands and want to replace, firstly, f .ip the switch and take out the wrist band, then pick up the land you like, and flip the swarth into the en of the watch until you hear a click and then snaps into place
Note, Pay attention to the position of the Long and short band and the display Screen, do not install them upside, down.
■ Charge your watch
Connect the US8-chart1ing cable with the watch according to the picture.
■ Wearing
Wear the device with a liner’s distance front the wrist Done and adjust the tightness of the wrist band to a comfortable position
■ Power on/off
- Long press the side button for 4-5 seconds to power on. Or it to power on.
- Switch to the Shutdown interlace, and press it to power off. Or press the side Dutton for 4-5 seconds in the main interface to power off.
■ Install the App
- Open your APP store and search ’61aryFit” to install
- Or scan the following QR codes to install “GloryFit’. The CIR code can be found in the Setting.
https://app.help-document.com/gloryfit/download/index.html
■ Device connection
- Turn on the Bluetooth in your phone;
- Open the “GloryFit’ in your phone:
- Click Device'”:
- Click “Add a new device”:
- Click “Select device”;
- Select the product model· TraryaGo;
- Click “Pair” to complete connection.
Note, If you can’t find ‘TraryaGo'” in step6, please check whether-the device
has ben selected in the Bluetooth list of your mobile phone.
If so, please click “Ignore TranyaGo” and search again.
The Glory Fit would save the Bluetooth address of your smart watch after the above steps. Once the GloryFit is running, the watch will be connected automatically next lime.
■ Operation
- Raise your hand or press the side button to light up the screen.
- The screen will turn off without operations in 5 seconds by default. You can modify this default value in the GloryFit.
- The heart rate monitoring function is on by default. You can turn it off in the GloryFit.
- Press the side button at any time to return back
■ Data synchronism
The watch can store 7 days of off-line data, and you can synchronic the data on the App homepage manually. The more data, 1he long or the synchronization limo is, and the longest limo is abort 2 minutes.
App functions and settings
■ Personal information and exercise goals
- Open the App GloryFit to set your personal information.
- Setting your avatar, name, gender, age, height and weigh, which can help to increase the accuracy of the monitoring data.
- Sot your daily exorcism goals.
■ App setting
Do Not Disturb: If the Do Not Disturb mode is on, t1e screen will not light up when you raise your rend, as well as brakes vibrations and message push will be off. Out of the time range, can also set Vibration mode off or message off.
Basic
■ Basic navigation
The home screen is the clock.
- Swipe down to see the quick settings, such as Do Not Disturb, Brightness, Find the Phone, Setting
- Swipe up to the notifications.
- Swipe right to see the Apps on your watch.
- Swipe left to see the shortcut interfaces, such as Status, Heart rate, Sleep, Weather.
- Press the side button to return.
■ Main page function
■ Switch main interface
- Long Press the main interface for 4-5 seconds to switch.
- or (Setting) – Dial to switch.
Note: You can also choose more interfaces h the Dash Board of GloryFit.
Manu List
■ Sports interface
Switch to the Sports interface. press the screen to enter the specific Sports interface. Press the side button to pause, you can choose whether to continue or exit.
■ Status interface
Switch to the Status initiate to check the steps, distances and calories. The distances and calories are calculated tasked on the current walking steps, the height and weight set in the App individually.
■ Heart Rate interface
switch to the Heart Rate interrater, click the screen to view the heart
rote data.
Note:
- The heart rate monitoring is enabled by default. If you don’t want this function, you can turn it off in the “GloryFit” App.
- If the heart rate monitoring function is on, the green light on the back of the watch will keep flashing
- The sensor should be close lo the skin to avoid the effect From external light or, The accuracy,
- When you find that the heart rate data is inaccurate, you can restart the watch to correct it.
■ Sleep interface
Switch to the Sleep interlace and check the sleep status. When you fall asleep, the watch will determine to enter the sleep monitoring mode automatically 1o calculate the length o1 your deep sleep/tight sleep/awake time all night, and evaluate your sleep quality. You can only view sleep data on the App.
Note: The sleep date can only be recorded when you sleep with the watch.
■ Weather Interface
Switch off Weal her interrace, you can view the weather and temperature.
■ Music interface
You can play, pause or switch the songs playing in your cell phone.
■ Message interface
In the Message interlace, click the rain screen to view the message, slide the screen to turn the pages. Pr1!ss the side button to exit.
■ More
Stopwatch: Switch to the S1opwatch interface, click to enter the timing interlace. Countdown, Switch ta the Countdown intricacy, Ana dick to choo.so the 1ime you want to count down. You can customize the time at the Datum of the page. When the time is up, the watch will vibrate. Flashlight, Switch to the Flashlight interlace, and press the screen turn on the flashlight. Find the Phone: Switch lo the Find the Phone interlace and touch the icon, then the phone would ring.
■ Setting
Precautions
-
Please avoid strong impact, extreme heat and exposure to the watch
-
Please do not disassemble, repair or transform the device on its own
-
The use of the environment is a degrees -45 degrees, and ii is forbidden to throw it into the fire so as not 1o cause an explosion.
-
Please wipe off the with ,oft cloth and then the watch con be used for the chalking operation, otherwise it will co use corrosion of charging contact point and charging incident may occur.
-
Do not touch the chemical substances such as gasoline, clean solvent, propanol, alcohol or insect repellent.
-
Please do not use this product in high pressure and high magnetic environment.
-
If you have sensitive skin or tighten the wristband, you may feel discomforted.
-
Please dry the sweat drips on the wrist in trine. The strap has long
contact with soap, sweat, allergies or pollution ingredients, which may cause skin allergy itching. -
If it is oaten used, it is recommended to clean the wristband wee Wipe with wealth an removed! ail or dust with mild .soap. It is net appropriate to war a hot bath with a wristband. After swimming, please wipe the wristband in lime so as la keep dry.
FAQ
Q: Can’t find the smart watch when trying to select device on the GloryFit App setting.
A:
- Make sure the smart watch is on and close to your phone,
- Make sure the smart watch – ‘TranyaGo” is NOT on the Bluetooth list of your phones:
- Make sun, the smart watch is not connected to any other phono’s. Search again and you would find “Tanya'” in your GloryFit App,
Q: Is the watch waterproof?
A, It supports IPOB waterer Of and dust-proof 11 [IPOB standard is 35 degr1es below water, I meter below . Usually, yw can w-ash your hands, lake a cold shower, or wash car wth the smart watch.
Note, But be sure not to enter the steam room with your watch. Such as sauna, hot spring, hot both, etc.
Q: Why is the data of heart rate monitoring inaccurate?
A: To calculate your heart rate, Heart Rate Monitoring utilizes the LED gills lo determine how much green and red light is being detected from the skin of your wrist. If you don’t keep the watch dose to your skin, there will be ambient light reaching into the sensor, which will affect measurement accuracy.
Q: Why can’t I receive the message notification?
Basic parameter
For more information. please visit: www.tranya.com
For any assistance, email us: support@lranya.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>