CamKix Remote Control for Smartphones User Manual
- June 15, 2024
- CamKix
Table of Contents
CamKix Remote Control for Smartphones User Manual
The CamKix Camera Shutter Remote Control will allow you to take pictures or record videos with your phone/tablet using Bluetooth wireless technology. You will only need to pair the remote with your device once. Then you can have lots of fun with it. To pair it and use it, please follow these 3 simple steps:
-
Check the battery If present, remove the isolation strip. Make sure the positive polarity (+) of the battery is facing upwards.
-
Pair the remote with your device Set the power switch of the remote control to “on”. The LED on the remote will start to flash.
-
On your phone or tablet, switch Bluetooth on and search for available devices. Connect with the device called “CamKix Shutter”.
-
Take a picture On your Android or iOS phone/tablet, and activate the camera app. Press the shutter button of the remote control to take a picture.
Camera 360 -
If for some reason the camera app does not recognize the shutter command of the remote control, install and use the “Camera 360” app.
Specifications
- Battery type: Coin/Button Cell
- Wireless range: Up to 30 feet (10m)
- Device name: CamKix Shutter
FCC Statement
This device complies with part 15 of the FCC rules Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
RF Exposure Information and Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Regulatory Conformance RED）
Hereby, OEM Tech Bargains LLC declares that the radio equipment type:
CAMKIX Bluetooth Remote Shutter
- D0027-SRC-BLA
- D0027-SRC-BLU
- D0027-SRC-GRE
- D0027-SRC-RED
- D0027-SRC-WHI
- D0034-TRIP-WRC
- D0035-TSK-BLA
- D0039-WSK-BLA
- D0223-LSB-BLA
- D0224-LST-BLA
- D0267-UTK-BLA
- D0268-UTL-BLA
- D0271-LSK-BLA
- D0276-IP7-12R
- D0278-S7E-12R
- D0280-ULK-FS5
- D0311-3LB-BLA
- D0426-2SR-BNW
- D0427-2SR-RNB
- D0428-SRK-BLA
- D0430-SRN-WHI
- D0431-SRN-RED
- D0432-SRN-BLU
- D0433-2SN-BNW
complies with Directive 2014/53/EU. The full text of the Declaration of Conformity is available at the following website: camkix.com/doc
Distributed/Imported by
USA: OEM Tech Bargains
446 W 4th AVE
Dayton, WY 82836
UK: OEM Tech Bargains
Unit 3, Lake Farm
Allington Lane, Fair Oak
Eastleigh, SO50 7D
Radio specification
Frequency Range: 2400-2483.5MHz
Max.RF power: +3.9dBm
Download PDF: CamKix Remote Control for Smartphones User Manual