Treevol Furniture MLB 8968 Nightstand Viliigili One Drawer White Finish Installation Guide
- September 12, 2024
- Treevol Furniture
Table of Contents
MLB 8968 Nightstand Viliigili One Drawer White Finish
“`html
Specifications:
- Product: One Drawer Nightstand
- Weight Capacity: 48 pounds
- Indoor Use Only
Product Usage Instructions:
What You Will Need:
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- Flat, smooth surface (cardboard or rug)
- Electric screwdriver (optional)
Assembly Steps:
-
Check the panel and hardware content to ensure everything is
correct. -
Use wood dowels by inserting them into the indicated holes and
gently hitting them until fully inside. -
Utilize the Minifix system by inserting the spreading bolt and
Minifix cam with the arrow pointing towards the panel’s edge. -
Follow the assembly diagram provided in the manual to put
together the nightstand. -
Slide the drawers into the cabinet.
-
After adjusting all Minifix cams, cover them with the provided
cover caps. -
Secure the cabinet to the wall to prevent tipping.
Care Instructions:
- Do not paint the cabinet.
- Avoid direct sunlight exposure.
- Clean metal hardware with a dry cloth.
- Avoid overloading the cabinet.
- Avoid hitting or hammering the cabinet unnecessarily.
- Clean with thinner, soft soap solution, or damp cloth.
- Do not drag the cabinet; lift it with assistance.
- Avoid water, fire, and high heat exposure.
FAQ:
Q: Can I use this nightstand outdoors?
A: No, this nightstand is designed for indoor use only.
Q: What is the weight capacity of the nightstand?
A: The nightstand can resist up to 48 pounds.
“`
ASSEMBLY INSTRUCTIONS
ONE DRAWER NIGHTSTAND
It’s much better if you get some company for this!
LOT N°
Index
What will you need?
2
Where should you start?
3
What’s in the hardware bag?
4
How do the dowels and Minifix system work?
(We also explain what they are)
5-6
Let’s start assembling!
7
How much weight does your cabinet resist?
12
Our last recommendations for taking care of your cabinet
13
What will you need?
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.
Phillips head screwdriver Flat head screwdriver Hammer
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier
🙂
2
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
A – x1 E – x1 I – x1 M – x1
B – x1 F – x1 J – x1
C – x1 G – x1 K – x1
D – x1 H – x1 L – x2
3
What’s in the hardware bag?
Wood dowel
x26
Spreading bolt
x19
Minifix cam
x19
Cover caps
x19
Flat head screw
x8
Knob
x1
Nail
Drawer slides + screws
x2
x1
2″
Drywall screws
x4
Be careful!, try not to lose anything from this bag, its content is necessary
for assembling your cabinet.
4
How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
When joining two
1
Put in the dowel
2
inside the indicated
panels together, don’t forget to gently hit
hole and softly hit it
the panels to adjust
until it’s fully inside.
the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
1
small arrow
This is a Minifix cam.
3
It has a little arrow on its
upper surface.
This is a spreading bolt. You should put it with the black plastic part facing down.
2
You should insert these cams
with the little arrow pointing towards the drilling on the
4
panel’s edge (shown on the
left).
After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.
5
1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of
this cabinet.
A
2
B
C
6
3
D
Turn this panel over
D
4
E H
F
I
7
5
J Lx2
6
K
K L
L J
D
L
K
J
L
8
7
2″
Drywall screw
E
G
F
ME
8
M
H
E
EG MF H
9
9
C
I I
B
B
10
A
I
B
C
D
J
L
10
11
Slide the drawers inside the cabinet.
A
H
FC
B
D
J
L
After adjusting all the Minifix cams, cover
them up with the cover caps.
A
After finishing the assembly, lift off al the
adhesive letters.
11
How much weight does my cabinet resist?
48
33
33
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone. Be specially careful with the kids.
12
Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do
not expose it to the direct sun. Clean the metallic hardware with a dry cloth.
DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the
cabinet (only when indicated here). Clean it with thinner, a soft soap
solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other
people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
13
WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 3 year warranty coverage in wooden parts and 1 year warranty
coverage in hardware pieces since its manufacturing date, which you can see in
the lot number printed on the product box and the assembly instructions
leaflet. Warranty covers materials and workmanship imperfections which impair
the assembly or correct functioning of the cabinet. This warranty is not valid
if the defects or imperfections are caused by the incorrect following of the
assembly instructions, warnings and recommendations, misuse, intentional
damage, fire or flood, or after modifications or any kind of alteration, or
repaired by someone not authorized, when it´s been assembled 3 months after
the date of purchase. These defects MUST be reported before the warranty
coverage period ends. Once the product has been assembled, the company will
not be responsible for defective and/or damaged parts. This warranty is ONLY
valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been
resold, rented, etc. Furniture will take no liability for incidental or
consequential damages caused to or by the product (This may not apply in your
state). To make this warranty valid you must write to our customer service
email describing the product defect, lot number and submitting your sales
reciept or proof of purchase, or contact us at our customer service line.
Replaced parts will be under the product´s original warranty coverage period.
Damaged parts will become property of the company. There are no other
warranties applicable to this product.
14
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>