Tranya QY01 Smartwatch User Manual

Tranya QY01 Smartwatch User Manual

Get Stared

Packing List

Replace the band

If you buy new bands and want to replace, firstly, flip the switch and take out the wrist band, then pick up the band you like, and flip the switch into the end of the watch until you hear a click and then snaps into place.

Note: Pay attention to the position of the tong and short band and the display screen, do not install them upside down.

Charge your watch

Connect the USB-charging cable with the watch according to the picture.

When the device is connected to the power supply. it will vibrate.

Wearing

Wear the device with a fingers distance from the wrist bone and adjust the brightness of the wrist band to a comfortable position.

Power on/off

1. Long press the ire button for 4-5 seconds to power on. Or charge it to power on.
2. Switch to the Shutdown interface. and press it to power off. Or press the side button for 4-5 seconds in the main interface to paver off.

Install the App

1. Open your Apo store and search “Gletynr to install.
2. Or scan the following OR cooes to install “Otenfit”. The OR code can be found in the Setting.

Device requirement: iOS 9.0 and above, Android 4.4 and above to support Bluetooth 4.0.

Personal information and exercise goals

1. Open the App Gloryfit to set your personal information.
2. Setting your avatar, name, gender, age, height and weight, which can help to increase the accuracy of the monitoring data.
3. Set your daily exercise goals.

Device connection

Before connecting, ensure the Mowing matters:

1. The watch is not directly connected to Wawa the Bluetooth of the mobile phone. If so, please delete the TranyaGo from the Bluetooth list of your mobile phone.
2. The watch is not connected to other mobile phones. If so, please unbind the watch from other mobile phones. Of the original phone is an iOS system, you also need to delete the “TranyaGo’ from the Bluetooth list of the phone).
3. The distance between the mobile phone and the watch should be less than 1 m.

Than follow the steps Wow to connect your smart watch:

Step 1: Turn on the Bluetooth in yo-r phone;
Step 2: Open the “GloryFir in your phone;
Step 3 Click “Device’;
Step 4 Click “Add a new device”;
Step 5 Click -Select device”;
Step 6: Select the product model – TranyaGo;
Step 7: Click “Pair” to complete connection.

Note: If you can’t find TranyaGo’ in step* please check whether the device has been selected in the Bluetooth list of your mobile phone. If so, please click “Ignore TranyaGo” and search again.

Operation

1. Raise your hand or press the side button to tight up the screen.
2. The screen will turn off without operations in 5 seconds by default. You can modify this default value in the GloryFit.
3. The heart rate monitoring function is on by default. You can turn it off in the GloryFit.
4. The blood oxygen function is off by default. You can turn it on in the GloryFit. 5. Press the side button at any time to return back.

Data synchronism

The watch can store 7 days of off-line data, and you can synchronize the data on the App homepage manually. The more data, the longer the synchronization time is, and the longest time is about 2 minutes.

GloryFit App functions and settings

Notification

1. Cell reminder
   You an one-click the “REJECT” to hang up the call.

2. SMS reminder

3. App reminder
   You can add reminders of App messages In the GloryFit, such as Twitter, Facebook. WhatsApp. Instagram and other application messages.

Note:

1. Be sure to turn on both of the functions and their permissions in the GloryFt.
2. The watch only can display 160 characters for IOS and 80 characters for Android per message.
3. If your watch doesn’t receive any message, please refer to the FAO at the end of the manual.

Physical health

1. Hart rote monitoring
   The heart rate monitoring function is on by default. You can turn it off in the GloryFit.

2. Blood oxygen setting
   The blood oxygen function is off by default. You can turn it on in the GloryFit.
   You can set the time and period of blood oxygen monitoring according to your needs. 1-H is the recommended cycle for blood oxygen monitoring.

Note: Heart rate monitoring will be suspended when monitoring blood oxygen, and vice versa.

3. Sedentary reminder
   You can set the start time, end lime and reminder interval of sedentary reminder according to your needs.

4. Physiological cycle
   ornate function. is only available atter you finish the following stops in the Gloryl-it.
   (1) Click on the profile—Select “Female” in the gender line

(2) Physiological Cycle—Fill in your period information—Start

General function

Note: For the following operations, the word expressions of IOS and Android systems will be a little different.

1. Raise hand to activate display
   The raise hand to activate display function is on by default. You can turn it off in the GloryFit.
   You can also set the time for the bright screen to 5s/ 10s / 15s.
   Android- Device —Universal settings—On-screen time —Bright screen length
   iOS: Device—More settings—Display Timeout—Click “Set the time

2. Do not disturb
   You can set the start and end time of “Do not disturb” mode according to your needs,
   Note: When you turn on the to not disturb’ mode, the `raise hand to activate display” and message notification function are unavailable.

3. Time system
   Android -Device —Universal setting—Time system—Select 12-hour system or 24-hour system
   IOS: Device-More setting-24-Hours Time (on/off)

4. Unit
   Android: Device —Universal settings—Unit—Select Metric system or British system
   
   IOS: Profile—Setting—Unit

5. Temperature unit conversion: C/F
   Step 1: Click the weather icon in the upper left corner of the -“Home” interface;
   Step 2: Choose 40/°F which is in the upper right corner of the weather interface.

More

1. Step Accomplishment Reminder
   You can set a target step number in the GloryFit. When you reach this target, the smart watch will shake three times to remind you that you have completed the goal.

2. Firmware upgrade
   If you are prompted to upgrade the software, please upgrade it in time.
   Note: Please fully charge the watch before updating. If the battery is less than 30%, the upgrade may fail.

Smart watch functions and settings

Basic navigation

The home screen is the clock.

1. Swipe down to see the quick settings, such as Do Not Disturb, Brightness, Find the Phone, Setting.
2. Swipe up to see the notifications.
3. Swipe right to see the Apps on your watch.
4. Swipe left to see the shortcut interfaces, such as Status, Heart rate, Sleep, Weather,
5. Press the side button to return.

Main page function

Switch watch face

1. Long press the main interface for 4-5 seconds to switch.
2. Or [Setting)-[Dial] to switch.

Note: You can also choose more faces in the Dash Board of GloryFit.

Sports interface

Switch to the Sports interface, press the screen to enter the specific Sports interface. Press the side button to pause, you can choose whether to continue or exit.

Status interface

Switch to the Status interface to check the steps, distances and calories. The distances and calories are calculated based on the current walking steps, the height and weight set in the App

Heart Rate interface

Switch to the Heart Rate interface, dick the screen to view the heart rate data.

Note:

1. The heart rate monitoring is enabled by default. If you don’t want this function, you can turn it off in the “GloryFit App.
2. If the heart rate monitoring function is on, the green light on the back of the watch wilt keep flashing.
3. If you find that the heart rate data is inaccurate, please pay attention to the following matters:
4. Wear the watch with moderate tightness, and the sensor behind the watch should be close to the skin;
5. Switch to the corresponding sports mode when exercising;
6. If it is still inaccurate, please reboot the watch.

Spo2 interface

Switch to the blood oxygen interface and measure your bi,00d oxygen level at any time.

Note:

1. Heart rate monitoring will be suspended when monitoring blood oxygen, and vice versa.
2. In order to make the blood oxygen data more accurate, please ensure the following matters during monitoring:
3. Ambient temperature is above 25°C;
4. Keep your wrists flat on the table without moving.

Sleep interface

Switch to the sleep interface and check the sleep status, Sleep data is mainly based on heart rate and wrist movement range. When you are asleep, the heart rate will decrease significantly.

Note:

1. Falling asleep between 6 a.m. and 6 p.m. is not recorded.
2. When you are tying in bed and playing with your phone for a long time, and your heart rate and wrist movements are similar to the state of sleep, the watch may determine that you are asleep.

Weather interface

Switch to the Weather interface, you can view the weather and temperature.
Note: Weather function is only available after you turn on the *Location” of the mobile phone.

Music interface

You can play, pause or switch the tracks playing in your cell phone.

Message interface

In the Message interface, click the main screen to view the message. slide the screen to turn the pages. Press the side button to exit.
Note: Message reminder is just a function to remind you to receive a message. Its display interface will have character restrictions(160 characters for IOS or 80 characters for Android per message).

More

Stopwatch: Switch to the Stopwatch interface, click to enter the timing interface.
Countdown: Switch to the Countdown interface, and click to choose the time you want to count down. You can customize the time at the bottom of the page. When the time is up, the watch will vibrate.
Flashlight: Switch to the Flashlight interface, and press the screen to turn on the flashlight.
Find the Phone: Switch to the Find the Phone interface and touch the icon, then the phone would ring.

Setting

Watch faces: You can also press the main interface for 4-5 seconds to switch.

QR code: Scan the QR codes to install the App “GloryFir.

Female interface

Through the App, you can record your personal menstrual cycle and predict the safety period, pregnancy and ovulation period, Help women understand their physical tnnef ‘,inn tn detail, so as to live a healthier life.

Note:

Female function is only available after you finish the following steps in the App:
1,”Me- —Click on the profile — Select ‘Female” in the gender line. 2.-Me”—Plnysiological Cycle”— Fill in your period information,

Precautions

1. Please avoid strong impact, extreme heat and exposure to the watch.
2. Please do not disassemble, repair or transform the device on its own.
3. The use of the environment is 0 degrees -45 degrees, and it is forbidden to throw it into the fire so as not to cause an explosion.
4. Please wipe off the water with a soft cloth and then the watch can be used for the charging operation, otherwise it will cause corrosion of charging contact point and charging incident may occur.
5. Do not touch the chemical substances such as gasoline, clean solvent. propanol. alcohol or insect repellent.
6. Please do not use this product in high pressure and high magnetic environment.
7. If you have sensitive skin or tighten the wristband, you may feel discomfortable.
8. Please dry the sweat drips on the wrist in time. The strap has long contact with soap, sweat, allergies or pollution ingredients, which may cause skin allergy itching.
9. If it is often used, it is recommended to clean the wristband every week. Wipe with wet cloth and remove oil or dust with mild soap. It is not appropriate to wear a hot bath with a wristband. After swimming, please wipe the wristband in time so as to keep dry.

Q: What should | do when my watch can’t be
connected to the phone normally?
A: Please follow the instructions

1. Install the “GloryFit” App in Google Play or App
   store and allow all authorizations required by GloryFit.

2. Make sure both of your watch and mobile phone
   Bluetooth are turned on, And it would be better that
   the distance between the mobile phone and the watch
   is less than 1m.

3. If the watch 1s not connected to the mobile phone
   through the GloryFit App, but directly through the
   Bluetooth search, please delete the watch “TranyaGo”
   from the Bluetooth list of your mobile phone.

4. If you want to connect to another new phone.
   please unbind the watch on the original phone
   through the GleryFit App first. [If the original phone is
   an iOS system, you also need to delete the watch
   TranyaGo from the Bluetooth list of the phone).

Q: Why can’t the watch receive SMS/APP information notification?

A: Please fallow the instructions:

1. Make sure that you have authorized the SMS/App notification
   for the Gloryfit App.

2. Ensure that the watch is connected to the mobile phone through the GloryFit App.

3. Make sure “Do not disturb* mode on the watch is turned off,

4. Ensure that the SMS reminder and App reminder of the GloryFit App are turn on,

5. Make sure that your GloryFit App is always running in the background.

Note: Some Android phones automatically close Apps running in
the background every 10-15 minutes. If GloryFit App is stopped
by the system, the watch will not receive any information
Notification.

You can keep the GloryFit App running in the background throug
“Setting” in your phone.

It you don’t know how to set it, you can search “your mobile
phone brand + how to keep the App running in the background?”
on Google.

Q: Why is time and weather on the watch incorrect?

A: The time and weather of the watch are synchronized with your smart phone,

1. Please make sure that your watch has been connected to your phone through the GloryFit App, and keep the GloryFit running.
2. At the same time, the “Location” of your mobile phone is turned on.

Q: Is the sleep data accurate?

A: Sleep data is accurate.
Sleep data is mainly based on heart rate and wrist movement
range. When you are asleep, the heart rate will decrease
significantly, When you are lying in bed and playing with your
phone for a long time, and your heart rate and wrist movements
are similar to the state of sleep, the watch may determine that
you are asleep. However, the third-generation algorithm of our
watch has fixed this problem,
Note: Falling asleep between 6 a.m. and 6 p.m. 15 rot recorded.

Q: How can | make my heart rate more accurate?

A:

1. Wearing the watch with moderate tightness, and the
   sensor behind the watch should be close to the skin,

2. Switch to the corresponding sports mode when exercising.

Q: How to adjust the brightness of the watch screen?

A: SETTING—Brightness—Click word “Weaken” or “Strengthen”

Q: Is the watch waterproof?

A: supports [P48 waterproof and dust-proof level (IP68 standard
1s 35 degrees below water. 1 meter below 30 minutes).
Usually, you can wash your hands, taxe a cold shower, or wash
car with the smart watch,
Note:   But be sure not to enter the steam room with your watch,
Such as sauna, hot spring, hot bath, etc.

Basic parameter

For more information, please visit:
tranya.com

For any assitance, email us:
support@tranya.com

Made in China

These devices comply with part 15 of the FCC rules, as well as the Canadian Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) the device should not cause harmful interference; and
(2) the device must accept any interference received. Including interference that may cause poor operation

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>