Tranya X2 Wireless Earbuds or Headphones User Manual
- June 4, 2024
- Tranya
Table of Contents
Tranya X2 Wireless Earbuds or Headphones
PACKAGE LIST
IMPORTANT NOTES
- Register your product on tranya.com to get an EXTRA three-month warranty for free.
- Before using the X2 wireless earbuds, please charge both the case and earbuds.
- If both earbuds don’t sync together, please reset the earbuds.
- To avoid damaging the earbuds, please use the original charging cable provided by the manufacturer for charging, and choose USB port of Computer or regular brand mobile phone charger which is in accord with 5V voltage, 100mAh-1A or less than 100mAh-1A current to charge.
- If the sound becomes low without control, please use tweezers to take out/remove the net inside the earbuds.
PHYSICAL BUTTON CONTROL
POWER ON/OFF
- Power on: Long press and hold the MFB for 4 seconds
- Power off: Long press and hold the MFB for 4 seconds
Note:
When the earbuds is at low battery, there is the automatic voice prompt:
battery low and the indicator light will flash every 5 seconds.
WEARING
- Step 1 Put the earbuds into your ears.
- Step 2 Rotate the earbuds to the auricle side to fit snugly.
CONNECT THE EARBUDS
- Step 1 Power on the earbuds and turn on the Bluetooth in your phone.
- Step 2 Select “Tranya X2” and confirm.
CHARGING
Charging: Red indicator light remains on
Fully Charged: Blue indicator light will be on
HOW TO RESET THE EARBUDS
- Turn off the earbuds
- Long press and hold the MFB for 8 seconds until the lights blink 3 times
- Rest successfully(Note: the pairing record will be automatically removed after reset)
FAQ
Q: Why does signal interruption occur in some places, such as along the
railway and the airport?
A: There are usually lots of underground cable lines along the places
mentioned above, which might cause electromagnetic interference and result in
the signal interruption.
Q: My earbuds don’t charge, what can I do?
A: Please try to follow below steps:
- Clean the charging port of the earbuds by an alcohol swab
- Change a Type C cable to see whether it works
Q: Why my earbuds can’t connect to my phone?
A: Our earbuds will automatically connect to the last-paired device for
convenient using. Pls make sure you have turned off the Bluetooth function of
your last-paired device before changing a device to connect with. If still
doesn’t work, please Contact our support team for help.
Q: Will the Bluetooth mouse cause SIgnal interference?
A: Perhaps. When your Bluetooth mouse and earbuds are connected to the same
device, it might happen.
For more information, please visit: tranya.com
For any assistance, email us:support@tranya.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>