V-TAC VT-180 LED Linear Highbay Installation Guide
- June 6, 2024
- V TAC
Table of Contents
V-TAC VT-180 LED Linear Highbay
TECHNICAL DATA
Model| Watts| Lumens| BeamAngle| PF| CRI|
ON/OFF Cycles| Input power| Dimension
---|---|---|---|---|---|---|---|---
VT-9-112| 100| 12000| 120| >0.9| >80| >20000|
AC:220-240V ,50HZ| 537x130x96mm
VT-9-152| 150| 18000| 120| >0.9| >80| >20000| AC:220-240V ,50HZ|
798x130x96mm
VT-9-202| 200| 24000| 120| >0.9| **** >80| >20000| AC:220-240V ,50HZ|
1059x130x96mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the installing
and keep this manual handy for future reference.
If you have any another query, please contact our dealer or local vendor from
whom you have purchased the product. They are trained and ready to serve you
at the best. The warranty is valid for 5 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal
wear and tear. The company gives no warranty against damage to any surface due
to incorrect removal and installation of the product. The products are
suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day
would void the warranty. This product is warranted for manufacturing defects
only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Please read through all following instructions before installing the unit.
- The linear highbay must be earthed.
- Method of attachement of the cable or cord such that any replacement can only be made by the manufacturer, his service agent or similarly qualified person.
- Terminal block not included. Installation must be performed by a qualified person.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- To be connected with waterproof cable hose.
INSTALLATION DIAGRAM
MOUNTING 1
- Installing the lifting ropes to the mounting surface.
- Installing the revolving brackets and fixing the screws into the revolving brackets.
- Fixing the lamp to the lifting ropes
- Connecting the wire to the lamp.
- Turning on the power to make sure the light is working.
MOUNTING 2
- Installing the revolving brackets and fixing the screws into the revolving brackets.
- Installing the Mounting Brackets to the mounting surface.
- Fixing the screws to the brackets
- Connecting the wire to the lamp.
- Turning on the power to make sure the light is working.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>