biamp SPA-GRB100 Desono Ceiling Loudspeaker Accessories Black Grille Installation Guide

: June 9, 2024
: biamp

Table of Contents

SPA-GRB100 Desono Ceiling Loudspeaker Accessories Black Grille
Product Information
Product Usage Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SPA-GRB100 Desono Ceiling Loudspeaker Accessories Black Grille

Product Information

The DesonoTM Ceiling Loudspeaker Accessories Black Grille is a
product offered by Biamp. It is suitable for use with Desono DX and
CM ceiling loudspeakers. The black grilles are sold in 6-packs and
can be installed on the ceiling loudspeaker by substituting the
black grille for the white grille included with the unit. These
grilles are made of powder-coated perforated steel backed with
acoustically transparent color-matched cloth. The color is RAL
9017.

Product Usage Instructions

Install the loudspeaker per the instructions in the manual and
adjust tap settings as necessary.
Attach the grille tether by inserting the tether plug in the
hole in the loudspeaker face.
Position the grille against the outside ring. The magnets will
hold the grille in place.
Substitute the black grille for the white grille included with
the unit.
Refer to the appropriate Installation and Operation guide for
full installation instructions.

Note: The black grilles are available in different models that
fit specific loudspeaker models. Please refer to the table below
for compatibility:

Model	Fits
SPA-GRB100	CM20DTS, CM30DTD
SPA-GRB200	CM60DTD, DX-IC4, DX-IC4LP
SPA-GRB400	DX-IC6
SPA-GRB500	DX-IC8
SPA-GRB600	DX-IC10, DX-IC10SUB

To download the appropriate installation guide for your
loudspeaker model, scan the QR-code provided or visit bia.mp/DesonoCeiling_pubs.
For any further assistance or warranty inquiries, please contact
Biamp via email at [email protected] or visit their website at
www.biamp.com.

DesonoTM Ceiling Loudspeaker Accessories Black Grille
Installation Guide
Biamp offers several sizes of Black Grilles (GRB) suitable for the Desono DX and CM ceiling loudspeakers. They are sold in 6-packs and can be installed on the ceiling loudspeaker by substituting the black grille for the white grille included with the unit. Please refer to the appropriate Installation and Operation guide for full installation instructions.
Installation
1. Install the loudspeaker per the instructions in the manual and adjust tap settings as necessary.
2. Attach the grille tether by inserting the tether plug in the hole in the loudspeaker face.
3. Position the grille against the outside ring. The magnets will hold the grille in place.
1

Model
SPA-GRB100 SPA-GRB200 SPA-GRB400 SPA-GRB500 SPA-GRB600

SPA-GRB
Black Grille
Fits
CM20DTS, CM30DTD CM60DTD, DX-IC4, DX-IC4LP DX-IC6 DX-IC8 DX-IC10, DX-IC10SUB

2

3

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA

Typical installation (CM30DTD shown) W: www.biamp.com

SPECIFICATIONS

Material / Finish: Powder-coated perforated steel backed with acoustically transparent color matched cloth. Color is RAL 9017.
Quantity per kit: Sold in 6-packs

Model

Fits

Ø Diameter mm [in]

SPA-GRB100 SPA-GRB200 SPA-GRB400 SPA-GRB500 SPA-GRB600

CM20DTS, CM30DTD

Ø 221 mm (8.69″)

CM60DTD, DX-IC4, DX-IC4LP Ø 258 mm (10.15″)

DX-IC6

Ø 291 mm (11.46″)

DX-IC8

Ø 341 mm (13.43″)

DX-IC10, DX-IC10SUB