mxion KLM Fair Light Module User Manual
- June 3, 2024
- mXion
Table of Contents
KLM
User manual
Introduction
Dear customer, we strongly recommend that you read these manuals and the
warning notes thouroughly before installing and operating your device. The
device is not a toy (15+).
NOTE: Make sure that the outputs are set to appropriate value before
hooking up any other device. We can’t be responsible For any damage if this is
disregarded.
General information
We recommend studying this manual thoroughly before installing and operating
your new device.
Place the decoder in a protected location.
The unit must not be exposed to moisture.
NOTE: Some funktions are only available with the latest firmware.
Please make sure that your device is programmed with the latest firmware.
Summary of Funktions
DC/AC/DCC/PWM/ANALOG operation 5-Channel functionmode Light imitation for
funfair e.g.
Robust, simple screw clamp
Scope of supply
Manual
mXion KLM
Hook-Up
Install your device in compliance with the connecting diagrams in this manual.
The device is protected against shorts and excessive loads. However, in case
of a connection error e.g. a short this safety feature can’t work and the
device will be destroyed subsequently.
Make sure that there is no short circuit caused by the mounting screws or
metal.
Connectors
Switch consumption between A1-5 and +.
By connecting K1 and –can the associated output be switched.
The – pole is on the bottom side!
Product description
The mXion KLM is a versatile module.
This module implements five output channels of a fair module. You can for
example 5 buildings with 5 different lights and this light or at the fair the
action in different patterns light up.
Simply connect each building or a string of lights on to CH1-CH4. The common
pole is the positive pole. The modes include running lights, strobe and fader.
All channels (1-5) are each illuminated different and alternately to a
colorful and effective as possible to implement lighting.
Since many light games are sequential is recommended that you, your bulbs, LEDs, or other in the following ordert o the module connect:
| LED1 | LED2 | LED3 | LED4 | LED5 |
|---|---|---|---|---|
| CH1 | CH2 | CH3 | CH4 | CH5 |
Technical data
Power supply: 7-27V DC/DCC/PWM
5-20V AC
Current: 1mA (with out functions)
Maximum function current: Channel 1 – 4: 1 Amps
Channel 5: 0.1 Amps
Max. output from module: 2 Amps
Temperature range: -5 up to 50°C
Dimensions LBH (cm): 2.72.31
NOTE: In case you intend to utilize this device below freezing temperatures, make sure it was stored in a heated environment before operation to prevent the generation of condensed water. During operation is sufficient to prevent condensed water.
Warranty, Service, Support
micron-dynamics warrants this product against defects in materials and
workmanship for one year from the original date of purchase. Other countries
might have different legal warranty situations. Normal wear and tear, consumer
modifications as well as improper use or installation are not covered.
Peripheral component damage is not covered by this warranty. Valid warrants
claims will be serviced without charge within the warranty period. For
warranty service please return the product to the manufacturer. Return
shipping charges are not covered by micron-dynamics. Please include your proof
of purchase with the returned good. Please check our website for up to date
brochures, product information, documentation and software updates. Software
updates you can do with our updater or you can send us the product, we update
for you free.
Errors and changes excepted.
Hotline
For technical support and schematics for application examples contact:
micron-dynamics
info@micron-dynamics.de
service@micron-dynamics.de
www.micron-dynamics.de
https://www.youtube.com/@micron-dynamics
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>