mxion MZSpro WLAN Adapter User Manual
- June 3, 2024
- mXion
Table of Contents
mxion MZSpro WLAN Adapter
Introduction
Dear customer, we strongly recommend that you read these manuals and the
warning notes thouroughly before installing and operating your device. The
device is not a toy (15+).
NOTE: Make sure that the outputs are set to appropriate value before
hooking up any other device. We can’t be responsible For any damage if this is
disregarded.
General information
We recommend studying this manual thoroughly before installing and operating
your new device.
NOTE: Some funktions are only available with the latest firmware. Please
make sure that your device is programmed with the latest firmware.
Summary of Functions
- WLAN 100% compatibility
- WLAN module and 2.4 Ghz module For controller and feedback
- feedback modules with wifi possible Controlling over App (Android & Apple) Z21®-App nutzbar
- Z21 WLANMAUS possible
- WLAN Client-Mode possible
- WLAN AP-Mode possible
- No code neccassary
- No Router neccassary
- Triple-Buffer WLAN
- 80 m field reach
- each of wireless depends on house wlan
Scope of supply
- Manual
- mXion MZSpro WLAN Adapter
Hook-Up
Install your device in compliance with the connecting diagrams in this manual. The device is protected against shorts and excessive loads. However, in case of a connection error e.g. a short this safety feature can’t work and the device will be destroyed subsequently. Make sure that there is no short circuit caused by the mounting screws or metal.
Connectors
We will install the Wifi adapter if you have both together buy. If not, but the assembly is very easy. Open the housing and plug the adapter into it slot (plug with marks on PCB „Funk -Adapter“).
Product Description
The mXion MZSpro is a universal wireless adapter for integration of wireless
to the MZSpro. It is possible to 2.4 Ghz and WiFi. In addition, our 2.4 Ghz
back and forth occupancy detectors are integraded.
However, the high-light of the wireless adapter is the integrated full-access
triple buffer WLAN module. That offers tremendous speed and many
possibilities. So it is possible that the Z21® App (Apple & Android) as well
the Z21 WLANMAUS are used can. It is possible, the hand controller or run the
app on your own home Wi-Fi to let the adapter into the WLAN integrate. Of
course (just for one outdoor area) it is possible to go directly to be able to
switch to the module so that your mobile phone or the Z21 WLANMAUS switch
directly to the module without ext. router. It will be neither a router nor an
unlock code is needed, both are already included and integrated.
WLAN integration
There are 2 ways to connect to wifi modules to communicate.
The first mode is the direct connection, that means you have to be in the WLAN
of the device log in. Choose on the phone or in the Z21 WLANMAUS the network
mXion MZSpro and entert he password MDELEC1207. Afterwards you mobile phone
will be connected to the WLAN. Set now the new IP adress in the Z21 WLANMAUS
(Settings -> WLAN -> Z21-IP-ADRESS) or set App (Settings -> Z21 Settings) to
192.168.111.111.
You can now control your trains and switches. More is not necessary. Pay
attention to the cell phone that you stay in the wifi when a message comes,
press „no“ to join the network stay. With the Z21 WLANMAUS you will find the
point WLAN under atitudes then press SSID, select mXion MZSpro and entert he
password from above. Make sure that you press the shift key to write uppercase
letters. On free field has about 80 m range.
The second mode is the client intrusion, that means you insert the module into
your home WLAN and can it over your normal network control. Your mobile phone
will continue to do so internet, but control is only possible if you are
inside the WLAN. Advantage is the better control by walls. The connection
takes place via the integrated web server. There can be some settings be made.
Follow the following steps.
for integration into your WLAN. Connect your mobile phone or PC to the WLAN mXion MZSpro with password MDELEC1207. Then open your browser and enter following: http://192.168.111.111 and press Enter. It then builds up the following on:
Important here is the client mode. This modus is the second one mentioned
above. This is necessary if you have the module in the want to switch on your
own WLAN.
Give the SSID (network name) of your home WLAN one as well as your password.
DHCP can be chosen (value = 1) if the IP is in dyn. should be awarded (only if
necessary). Use RFM radio to set the channel and the tape on which the radio
feedback modules run by us (Art-700x) if available. The same values must also
be in the modules be set (see instructions BM, RM, RBM). When you have
finished everything, click to „send“ and wait for the system has updated. You
then see the IP of the system included in the App or Z21 WLANMAUS can be
entered.
NOTE: If you like the o.g. IP address of the web server and enter your
home network data connects the central office directly with your home network.
You can then control directly. Join the Z21 WLANMAUS also with your home
network. However, select the direct connection (you connect the mobile phone
or Z21 WLANMAUS directly with the central), you need the IP of the web server
in the app (Settings -> Z21 Settings) or in the WLANMAUS (Settings -> WLAN ->
Z21-IP-ADRESS) to the webserver (192.196.111.111), so that you can control!
Technical data
- Current: 100mA
- Temperature range: -40 up to 70°C
- Dimensions LBH (cm): 2.55.33.0
NOTE: In case you intend to utilize this device below freezing temperatures, make sure it was stored in a heated environment before operation to prevent the generation of condensed water. During operation is sufficient to prevent condensed water.
Warranty, Service, Support
micron-dynamics warrants this product against defects in materials and workmanship for one year from the original date of purchase. Other countries might have different legal warranty situations. Normal wear and tear, consumer modifications as well as improper use or installation are not covered. Peripheral component damage is not covered by this warranty. Valid warrants claims will be serviced without charge within the warranty period. For warranty service please return the product to the manufacturer. Return shipping charges are not covered by micron-dynamics. Please include your proof of purchase with the returned good. Please check our website for up to date brochures, product information, documentation and software updates. Software updates you can do with our updater or you can send us the product, we update for you free. Errors and changes excepted.
Hotline
For technical support and schematics for application examples contact: micron-
dynamics
[email protected]
[email protected]
www.micron-dynamics.de
https://www.youtube.com/@micron-dynamics