HDBT 8Gbps HDMI over HDBaseT Extender with Bi-directional IR 150M User Manual

HDBT 8Gbps HDMI over HDBaseT Extender with Bi-directional IR 150M

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference.

Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. The use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

1. Introduction

This 18Gbps HDMI Extender can extend high definition video/audio signal, RS-232, bi-directional IR, and the distance are up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. It supports resolution up to 4K2K@60Hz 4:4:4, 18Gbps, and HDCP 2.2. One HDMI loop port is available for output. It also supports de-embedded audio for L/R audio output and PoC function. In addition, the extender is equipped with a two-way IR pass-through which allows for source and display control.

This HDMI extender includes two units: transmitter unit and receiver unit. The transmitter unit is responsible for capturing HDMI input signal and carrying the signal via one cost-effective Cat5e/6 cable and transmitting/emitting IR control signals. The receiver unit is responsible for receiving the HDMI signal and transmitting/emitting the IR control signal.

The extender offers the most convenient solution for HDMI extension via a single Cat5e/6 with long-distance capability and is the perfect solution for any application.

2. Features

• HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant

• Support 18Gbps video bandwidth

• The maximum extended transmission distance via a single Cat5e/6 cable:
  394ft / 120 meters for 4K2K signal;
  492ft / 150 meters for 1080P signal

• Support one HDMI loop output on the transmitter

• De-embedded audio to analog stereo output on the receiver

• With bi-directional IR, RS-232, and CEC pass-through

• HDR, HDR10+, Dolby Vision, and HLG function supported

• Supports PoC (Power over Cable) function

• Compact design for easy and flexible installation

3. Package Contents

4. Specifications

5. Operation Controls and Functions

5.1 Transmitter Panel

5.2 Receiver Panel

5.3 IR Pin Definition

IR Receiver and Blaster pin’s definition is as below:

The following is an IR system diagram about the IR cable use method.
Note: when the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.

6. Application Example

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>