mxion aerolight User Manual
- June 3, 2024
- mXion
Table of Contents
mxion aerolight
Introduction
Dear customer, we strongly recommend that you read these manuals and the warning notes thoroughly before installing and operating your device. The device is not a toy (15+).
NOTE:
Make sure that the outputs are set to the appropriate value before hooking up
any other device. We can’t be responsible For any damage if this is
disregarded.
General information
We recommend studying this manual thoroughly before installing and operating your new device.
NOTE:
Some functions are only available with the latest firmware. Please make sure
that your device is programmed with the latest firmware.
Summary of Functions
- Smooth-Shift all colors
- Colors are available individually
- Automatic dimming
- Sleep-Timer configurable
- WLAN compatible
- Iterates 19 colors in Smooth-Mode
- Status-LED
- Colors clock is set to 5min. up to 1h
- 20 colors available individually (WLAN)
- 3 colors manuell configurable
- Light sensor can switch on/off
- Colour management over the mouse pointer
- Color transfer via LightPilot®-APP
- Times can be changed, memory effect Storing the last state even after power failure
Scope of supply
Manual
- Trafo 12V/2A Light sensors aerolight.
- The aero light has a power supply for up to 10m long RGB-Strips.
Hook-Up
Install your device in compliance with the connecting diagrams in this manual.
The device is protected against shorts and excessive loads. However, in case
of a connection error e.g. a short this safety feature can’t work and the
device will be destroyed subsequently.
Make sure that there is no short circuit caused by the mounting screws or
metal.
NOTE:
When starting the aerolite flashing the lights. It connects to the time to the
WLAN and then picks up necessary data. This process takes about 5 sek. Then
you can use the aero light active use.
Send during no data operation on the device.
FIRST START:
Wait for the process to up from flashing. Then you can use the login device on
your network (procedure see app/MDTerm).
Product Description
The aero light is the perfect device for rooms and objects illuminate with harmonious colors. To this end, we fit a user-compatible long LED-RGB-Strip which adhesive to all materials can be attached. The adhesive back residues can be removed without leaving any residue.
The Primary is the aero light as the TV backlight developed. Here the equipment is in the field of view the perception of the audience increases. Also spares the passive Backlight eyes when the TV is the only light in space. This soothes the eyes. Of course, the aerolite can on furniture be attached to this example. The space of the area With the beautiful colors to enlighten. If you, for example, a greater distance (shelves, bed frame) would like to highlight you can use the meter LED-Strips get.
The LED-Strips can be separated by 3 LED be. Waterproof LED-Strips can be in the pool and be attached. The aero light panel must be protected from moisture.
Bring the light sensor at your discretion. If you do not want a light sensor, you can disable this function with the interface. The cable can be without loss of warranty extended. This requires no polarity to be respected. Shorting the two cables only causes the max. brightness output is. After a power failure of the device, we last saved the state. Have you, e.g. in Smooth-Mode, the device begins to power automatically with the Smooth-Mode on?
About SmartTerm the color located at the mouse pointer may appear to be, for this purpose you need to activate the color picker. To control the color in the top right corner displayed. If you paint a particularly good you can via keyboard shortcuts save and then again at any time. The brightness can be adjusted by a plus slider. With the LightPilot-App you can bonus colors configure and save and call. This can be various other colors selected and there may even colors of your own images are used. Even, you can do everything else with this app, slide through this.
It is controlled via the app „LightPilot“.
aerolight front for light sensor (2-poles) and LED-strip (4-poles) (f.r.t.l
.)
aerolight with connected power supply back site.
WLAN facility
PC: To set your device:
- Click on switch „Einstellungen“ from SmartTerm and click now on „Im Netzwerk anmelden“. Follow the instructions on the screen.
ANDROID®: How to set up your device:
- After starting App LightPilot, the correct screen will open. Follow instructions.
- Optionally, slide left to 2nd screen. Click on „Network“ an follow the instructions.
Technical data
-
Power supply:
10 – 15 V DC -
Power:
- 24W (max. power supply)
- Standby <0.5W
-
Temperature range:
-
-20 up to 80°C
-
Dimensions LBH (cm):
552.3
NOTE:
In case you intend to utilize this device below freezing temperatures, make
sure it was stored in a heated environment before the operation to prevent the
generation of condensed water. During operation is sufficient to prevent
condensed water.
Warranty, Service, and Support
micron-dynamics warrants this product against defects in materials and workmanship for one year from the original date of purchase. Other countries might have different legal warranty situations. Normal wear and tear, consumer modifications as well as improper use or installation are not covered. Peripheral component damage is not covered by this warranty. Valid warrants claims will be serviced without charge within the warranty period. For warranty service please return the product to the manufacturer. Return shipping charges are not covered by micron-dynamics. Please include your proof of purchase with the returned goods. Please check our website for up-to-date brochures, product information, documentation, and software updates. Software updates you can do with our updater or you can send us the product, and we update for you for free.
Hotline
For technical support and schematics for application examples contact:
micron-dynamics
info@micron-dynamics.de
service@micron-dynamics.de.
www.micron-dynamics.de
https://www.youtube.com/@micron-dynamics.