Kylo Boho LED Remote Control Ceiling Fan Instruction Manual

Safety Precautions

1. This product is intended for indoor use only.
2. The ceiling fan must be connected to a standard power supply line that meets national safety requirements. If you are unsure about electrical matters, please consult a licensed professional electrician for installation.
3. Betore installing or dismantling the ceiling fan, make sure to turn off the power. During installation, ensure that all screws are securely tightened.
4. The ceiling fan must be installed on a sturdy ceiling that can support a weight of more than 30kg.
5. The distance between the fan blades and the ceiling plane should not be less than 20cm (less than 20cm may result in insufficient airflow).
6. A double-pole disconnect switch with a contact gap of more than 3mm must be installed at the power supply end of the fan (to be provided by the user).
7. During installation, the wiring sequence should follow the order of grounding wire, live wire, and neutral wire. During dismantling, the sequence should be neutral wire, live wire, and grounding wire to avoid electric shock.
8. To prevent personal injury, the fan blades should be installed at a height of at least 2.3 meters from the ground. Avoid bending the fan blades and brackets during installation and cleaning, keep the blades balanced, and ensure the cleanliness of the Ceiling fan. Do not place any foreign objects in the rotating fan blades.
9. To prevent electric shock or fire accidents, it is strictly prohibited to use wall control Switches or remote controls that are not specified for this ceiling fan.
10. Do not use parts or screws from other brands of ceiling fans with this product. Missing or modified components and screws may pose safety hazards.
11. When installing multiple ceiling fans, do not interchange the parts to avoid imbalance during operation.
12. In case of damage to electrical components. replacement parts must be provided by the manufacturer or its authorized service provider. Please have qualified professionals perform the replacement to prevent any danger.
13. Different models may have slight variations in their structures and installation methods. Please refer to the instruction manual for specific instructions. !f you have any questions, please consult the manufacturer or local dealer.

Exploded Diagram

1. Installation of Ceiling Plate
   (1) For Concrete Celfing’ Use an appropriate diameter 8mm Gril bil to drill holes to the appropriate dept. Secure the expansion screws (2 screws) in the holes and then install the ceding bracket. Tighten the nuts on the expansion screws
   (2) For Wooden Ceding: Use wood screws (4 screws) to fasten the ceiling directly draciat lo, the wooden square beam (with a thickness of 7 centimeters).
   Note: Alter securing the ceding bracket. ensure that it can withstand a pulling force of more than 30 pounds.
   (1) Use different screws to secure the ceiling bracket Depending on the type of ceiling material.
   (2) Do not directly install the ceiling bracket on ceiling panels lo prevent the wood screws from becoming loose. which may lead to danger

2. Securing the motor housing to the ceiling plate using screws.
   Note: The ceiling fan should be installed at a height of approximately 2.5 meters from the ground and approximately 1 meter away from the nearest wall.

Remote control operation:

1. Remove the battery compartment cover from the back of the remote control to install or replace the batteries.
2. Use a 12V battery.
3. If the remote control will not be used for a long period. remove the batteries to prevent damage to the remote control. Store it in a place away from excessive heat or moisture.

Functions of the remote control:

6. Installation of fan blades:

1. Take a screw and thread it through a washer.
2. Thread the screw through the blade bracket and then through the fan blade.
3. Secure the blade by fastening the screw onto the motor.

7. Install the decorative cover:

1. Align the nut in the middie of the decorative cover with the motor shaft screw.
2. Rotate the decorative cover clockwise to securely fasten it onto the motor.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>