SONY KDL-37V58 LCD Digital Colour TV Instruction Manual

SONY KDL-37V58 LCD Digital Colour TV

• Instructions about “Installing Wall Mount Bracket” are included within this TV’s instructions manual
• For useful information about Sony products http://www.sony-europe.com/myproduct/
• http://www.sony.net/

Printed in Spain

NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM

• A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.
• Should the fuse in the plug supplied need to be replaced, a 10 AMP fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used.
• When an alternative type of plug is used it should be fitted with a 10 AMP FUSE otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board.
• If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

How to replace the fuse
Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product.

Introduction

• Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.
• The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony
• Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Notes on Digital TV function

• Any functions related to Digital TV ) will only work in countries or  areas where DVB-T (MPEG-2 and H.264/MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG-2 and H.264/MPEG-4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV.
• Your cable provider may charge a fee for their services, or require you to agree to its terms and conditions of business.
• This TV set complies with DVB-T and DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed.
• Some Digital TV functions may not be available in some countries/areas and DVB-C cable may not operate correctly with some providers.

For a list of compatible cable providers, refer to the support web site:http://support.sony-europe.com/TV/DVBC/

• The illustrations used in this manual are of the KDL-40V58xx unless otherwise state.
• The “x” that appear on the model name, correspond to numeric digits related to colour variation.

Trademark information

• is a registered trademark of the DVB Project.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
• DLNA and DLNA CERTIFIED are trademarks and/or service marks of Digital Living Network Alliance.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
• “BRAVIA” and are trademarks of Sony Corporation.
• “XMB™” and “XrossMediaBar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc.
• DiSEqC™ is a trademark of EUTELSAT.
• FREESAT and the FREESAT logo are registered trade marks of Freesat (UK) Ltd and are used under licence.
• FREESAT Logo (c) Freesat (UK) Ltd.
• The Channel logos are trade marks and copyright of their respective owners.

Start-up Guide

Before Use

• To check the accessories
• Mains lead (Type C-6)* (1) (Except for 37/32 inches)
• Stand (1) and screws (4)
• RM-ED020 Remote (1)
• RM-ED018 Remote (1) (KDL-46/40/37/32W5820/ 5830/5840 only)
• Size AA batteries (R6 type) (2)
• • Do not remove the ferrite cores.

To insert batteries into the remote 1: Attaching the stand

1. Open the carton box and take out the stand and the screws.
2. Place the TV set on the stand. Take care not to interfere with cables.
3. Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws.

If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm).

2: Connecting an aerial/Set Top Box/recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART Set Top Box/recorder (e.g. DVD recorder)

• Screw the satellite connector softly with hand, do not use any tool.
• TV must be switched off when connecting satellite antenna.

Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI

3: Preventing the TV from toppling over

1. Install a wood screw (4 mm in diameter, not supplied) in the TV stand.
2. Install a machine screw (M4 × 20, not supplied) into the screw hole of the TV.
3. Tie the wood screw and the machine screw with a strong cord.

4: Bundling the cables

Do not bundle the mains lead/AC power cord together with other cables.

Performing the initial Set-up

1. Connect the TV to your mains socket.
2. Press on the TV.
   When you switch on the TV for the first time, the Language menu appears on the screen.

Follow the instructions on the screen.

• Satellite Auto Tuning: Confirm that the tuning settings are the same that your satellite settings.
• Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using “Quick Scan”, try “Full Scan” (though it may take some time).

For a list of compatible cable providers, refer to the support web site:http://support.sony-europe.com/TV/DVBC/
You can also tune channels manually.

• Programme Sorting: If you want to change the order of analogue channels, follow the steps in “Programme Sorting”.
• Eco Preset: When you select “Yes”, the “Eco” settings are changed into recommended values to reduce power consumption.

Adjusting the viewing angle of the TV
This TV can be adjusted within the angles shown below.

Adjust the angle left and right (swivel) Detaching the Table-Top Stand from the TV

• Remove the screws guided by the arrow marks of the TV.
• Do not remove the Table-Top Stand for any reason other than to wall-mount the TV.

Safety Information

Installation/Set-up
Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries.

Installation

• The TV set should be installed near an easily accessible mains socket.
• Place the TV set on a stable, level surface.
• Only qualified service personnel should carry out wall installations.
• For safety reasons, it is strongly recommended that you use Sony accessories, including:
  • Wall-mount bracket SU-WL500
• Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook.
• The diameter and length of the screws differ depending on the Wall-mount bracket model.
• Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.

Transporting

• Before transporting the TV set, disconnect all cables.
• Two or three people are needed to transport a large TV set.
• When transporting the TV set by hand, hold it as shown on the right. Do not put stress on the LCD panel.
• When lifting or moving the TV set, hold it firmly from the bottom.
• When transporting the TV set, do not subject it to jolts or excessive vibration.
• When transporting the TV set for repairs or when moving, pack it using the original carton and packing material.

Ventilation

• Never cover the ventilation holes or insert anything in the cabinet.
• Leave space around the TV set as shown below.
• It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation.

Installed on the wall

Installed with stand

• To ensure proper ventilation and prevent the collection of dirt or dust:
  • Do not lay the TV set flat, install upside down, backwards, or sideways.
  • Do not place the TV set on a shelf, rug, bed or in a closet.
  • Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc.
  • Do not install the TV set as shown below.

Mains lead
Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries:

• Use only mains leads supplied by Sony, not other suppliers.
• Insert the plug fully into the mains socket.
• Operate the TV set on a 220–240 V AC supply only.
• When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables.
• Disconnect the mains lead from the mains socket before working on or moving the TV set.
• Keep the mains lead away from heat sources.
• Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire.

Notes

• Do not use the supplied mains lead on any other equipment.
• Do not pinch, bend, or twist the mains lead excessively. The core conductors may be exposed or broken.
• Do not modify the mains lead.
• Do not put anything heavy on the mains lead.
• Do not pull on the mains lead itself when disconnecting the mains lead.
• Do not connect too many appliances to the same mains socket.
• Do not use a poor fitting mains socket.

Prohibited Usage
Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries.

• Location:
  Outdoors (in direct sunlight), at the seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke.

• Environment:
  

  • To prevent the spread of fire, keep candles or other open flames away from this product at all time.
  • Places that are hot, humid, or excessively dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.

• Situation :
  Do not use when your hands are wet, with the cabinet removed, or with attachments not recommended by the manufacturer. Disconnect the TV set from mains socket and aerial during lightning storms.

• Broken pieces:

  • Do not throw anything at the TV set. The screen glass may break by the impact and cause serious injury.
  • If the surface of the TV set cracks, do not touch it until you have unplugged the mains lead. Otherwise electric shock may result.

When not in use

• If you will not be using the TV set for several days, the TV set should be disconnected from the mains for environmental and safety reasons.
• As the TV set is not disconnected from the mains when the TV set is just turned off, pull the plug from the mains to disconnect the TV set completely.
• However, some TV sets may have features that require the TV set to be left in standby to work correctly.

For children

• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that they are not mistakenly swallowed.

If the following problems occur…

• Turn off the TV set and unplug the mains lead immediately if any of the following problems occur.
• Ask your dealer or Sony service centre to have it checked by qualified service personnel.

When:

• Mains lead is damaged.
• Poor fitting of mains socket.
• TV set is damaged by being dropped, hit or having something thrown at it.
• Any liquid or solid object falls through openings in the cabinet.

Precautions

Viewing the TV

• View the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction.
• Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged.
• If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises.
• Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments.
• The screen and cabinet get warm when this TV set is in use. This is not a malfunction.
• The LCD screen contains a small amount of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury. Follow your local ordinances and regulations for disposal.

Handling and cleaning the screen surface/cabinet of the TV set

• Be sure to unplug the mains lead connected to the TV set from mains socket before cleaning.
• To avoid material degradation or screen coating degradation, observe the following precautions.
• To remove dust from the screen surface/cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution.
• Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material.
• Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
• When adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand.

Optional Equipment

• Keep optional components or any equipment emitting electromagnetic radiation away from the TV set. Otherwise picture distortion and/or noisy sound may occur.
• This product has been tested and found to compliant with the limits set out in the EMC Directive for using connection cables not longer than 3 meters (9.8 feet).

Batteries

• Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or mix old and new batteries.
• Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority.
• Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

Disposal of the TV set
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate collection systems)

• This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
• Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)
• This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.
• By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Remote and TV Controls/Indicators

Remote and TV controls
In case of KDL-46/40/37/32W5820/5830/5840, please refer to the separate leaflet.

Indicators

About the operation guide on the TV screen

Operation Guide

• Example: Press + or RETURN/ BACK (see 6 (page 11) or qj (page 11)).
• The operation guide provides help on how to operate the TV using the remote, and is displayed at the bottom of the screen. Use the remote buttons shown on the operation guide.

Watching TV

Watching TV

To select a digital programme using the Digital Electronic Programme Guide (EPG).

In digital mode
An information banner appears briefly. The following icons may be indicated on the banner.

To access Digital Text

To access Analogue Text

• To change the Screen Format manually
• Press repeatedly to select the desired  Screen Format.

1. **Smart***
   Enlarges the centre portion of the picture. The left and right edges of the picture are stretched to fill the 16:9 screen.

2. 4:3
   Displays the 4:3 picture in its original size. Side bars are shown to fill the 16:9 screen.

3. Wide
   Stretches the 4:3 picture horizontally, to fill the 16:9 screen.

4. Zoom *
   Displays the cinemascopic (letter box format) picture in the correct proportion.

5. **14:9***
   Displays the 14:9 picture in the correct proportion. As a result, side bars are shown on the screen.

• Parts of the top and bottom of the picture may be cut off. You can adjust the vertical position of the picture. Press F/f to move the picture up or down (e.g. to read subtitles).
• When you select “Smart”, some characters and/or letters at the top and the bottom of the picture may not be visible. In such a case, adjust “Vertical Size” in the “Screen” menu.
• When “Auto Format” is set to “On”, the TV automatically selects the best mode to suit the broadcast.
• If 720p, 1080i or 1080p source pictures are displayed with black borders on the screen edges, select “Smart” or “Zoom” to adjust the pictures.

SCENE
When you select the desired scene option, the optimum sound quality and picture quality for the selected scene are automatically set.
Press to select the scene option, then press +

• Cinema: Delivers picture scenes just like those in a theatre-like atmosphere with dynamic sound.
• Photo: Delivers picture scenes that authentically reproduces the texture and colour of a printed photo.
• Sports: Delivers picture scenes that let you experience realistic picture and sound like those in a stadium.
• Music: Delivers sound effects that let you experience dynamic and clear sound like that at a concert.
• Game: Delivers picture scenes that let you enjoy your game-playing experience to the fullest with superb picture and sound quality.
• Graphics: Delivers picture scenes that ease your prolonged monitor viewing experience and reduce fatigue by displaying clearer detailed pictures.
• General: Current user settings.
• Auto: The optimum sound quality and picture quality are automatically set according to the input source, though there may not be any effect depending on the connected devices.
  • In Digital mode, “Scene” options are applied independently for HD (High-definition) and SD (Standard-definition) pictures.
  • When you set Theatre Mode (page 12) to on, the “Scene Select” setting switches to “Cinema” automatically.

Instruction Manual

Instruction Manual
Displays the instruction manual on the screen.

Navigating through the Instruction Manual

1. Press HOME to display the XMB™.

Additional Information

Installing the Accessories (Wall-Mount Bracket)

To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.

To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this product.
Your TV can be installed using the SU-WL500 Wall-Mount Bracket (sold separately).

• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.
• Refer to “Detaching the Table-Top Stand from the TV” (page 7).
• Refer to “TV installation dimensions table” (page 18).
• Refer to “Screw and Hook locations diagram/table” (page 19).
• Place the TV on the Table-Top Stand, when securing the Mounting Hook.

Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.

TV installation dimensions table

Model Name

| Display dimensions| Screen centre dimension| Length for each mounting angle
---|---|---|---
Angle (0 ° )| Angle (20 ° )
A| B| C| D| E| F| G| H
KDL-52V58xx| 126.2| 82.2| 3.9| 47.8| 16.9| 40.7| 77.8| 51.5
KDL- 52W58xx| 126.2| 82.3| 3.9| 47.8| 16.9| 40.9| 77.8| 51.5
KDL-46V58xx| 112.3| 72.3| 8.4| 47.1| 15.0| 35.8| 68.5| 50.2
KDL- 46W58xx| 112.3| 72.5| 8.4| 47.1| 15.0| 35.9| 68.6| 50.3
KDL-40V58xx| 98.7| 63.6| 12.2| 46.3| 14.7| 32.8| 60.4| 49.3
KDL- 40W58xx| 98.7| 63.8| 12.2| 46.3| 14.7| 33.0| 60.4| 49.3
KDL-37V58xx| 91.7| 60.0| 14.0| 46.3| 14.5| 31.4| 57.0| 49.3
KDL- 37W58xx| 91.7| 60.2| 14.0| 46.3| 14.5| 31.6| 57.0| 49.3
KDL-32V58xx| 79.8| 53.6| 17.2| 46.3| 14.3| 29.1| 51.1| 49.2
KDL- 32W58xx| 79.8| 53.7| 17.2| 46.3| 14.3| 29.2| 51.1| 49.2

Figures in the above table may differ slightly depending on the installation.

WARNING
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 20) for its weight.

Screw and Hook locations diagram/table

Screw location
When installing the Mounting Hook on the TV. Hook location
When installing the TV onto the Base Bracket.

Specifications

Model name| KDL- 52V58xx, 52W58xx| KDL- 46V58xx, 46W58xx| KDL- 40V58xx, 40W58xx| KDL- 37V58xx, 37W58xx| KDL- 32V58xx, 32W58xx
---|---|---|---|---|---
Power and others
Power requirements| 220 V – 240 V AC, 50 Hz
Screen size (measured diagonally)| 52 inches / Approx. 132 cm| 46 inches / Approx. 117 cm| 40 inches / Approx. 102 cm| 37 inches / Approx. 94 cm| 32 inches / Approx. 81 cm
Display resolution| 1,920 dots (horizontal) × 1,080 lines (vertical)
Power| in “Home”/| 156 W (KDL-| 123 W (KDL-| 111 W (KDL-| 112 W (KDL-| 77 W (KDL-
consumption| “Standard” mode| 52V58xx)

164 W (KDL-

52W58xx)

| 46V58xx)

142 W (KDL-

46W58xx)

| 40V58xx)

110 W (KDL-

40W58xx)

| 37V58xx)

117 W (KDL-

37W58xx)

| 32V58xx)

71 W (KDL-

32W58xx)

| in “Shop”/| 254 W (KDL-| 203 W (KDL-| 177 W (KDL-| 169 W (KDL-| 109 W (KDL-
| “Vivid”| 52V58xx)| 46V58xx)| 40V58xx)| 37V58xx)| 32V58xx)
| mode| 261 W (KDL-

52W58xx)

| 221 W (KDL-

46W58xx)

| 172 W (KDL-

40W58xx)

| 179 W (KDL-

37W58xx)

| 99 W (KDL-

32W58xx)

Standby power consumption1| 0.17 W (17 W when “Quick Start” is set to “On”)
Average anual energy| 228 kWh (KDL-| 179 kWh (KDL-| 162 kWh (KDL-| 163 kWh (KDL-| 112 kWh (KDL-
consumption2| 52V58xx)

239 kWh (KDL-

| 46V58xx)

207 kWh (KDL-

| 40V58xx)

161 kWh (KDL-

| 37V58xx)

171 kWh (KDL-

| 32V58xx)

103 kWh (KDL-

| 52W58xx)| 46W58xx)| 40W58xx)| 37W58xx)| 32W58xx)
Supplied accessories| See “To check the accessories” (page 4).
Optional accessories| Wall-Mount Bracket| SU-WL500
Model name| KDL- 52V58xx,

52W58xx

| KDL- 46V58xx,

46W58xx

| KDL- 40V58xx,

40W58xx

| KDL- 37V58xx,

37W58xx

| KDL- 32V58xx,

32W58xx

---|---|---|---|---|---
Dimensions (Approx.) (w × h × d)
with| 126.2 x 86.9 x 35.8 cm| 112.3 x 77.1 x 33.0 cm| 98.7 x 68.4 x 30.3 cm| 91.7 x 64.8 x 30.3 cm| 79.8 x 58.4 x 25.9 cm
Table-| (KDL-52V58xx)| (KDL-46V58xx)| (KDL-40V58xx)| (KDL-37V58xx)| (KDL- 32V58xx)
Top| 126.2 x 87.1 x 35.8 cm| 112.3 x 77.2 x 33.0 cm| 98.7 x 68.6 x 30.3 cm| 91.7 x 64.9 x 30.3 cm| 79.8 x 58.5 x 25.9 cm
Stand| (KDL-52W58xx)| (KDL-46W58xx)| (KDL-40W58xx)| (KDL-37W58xx)| (KDL- 32W58xx)
without| 126.2 x 82.2 x 11.5 cm| 112.3 x 72.3 x 9.6 cm| 98.7 x 63.6 x 9.3 cm| 91.7 x 60.0 x 9.1 cm| 79.8 x 53.6 x 8.9 cm
Table-| (KDL-52V58xx)| (KDL-46V58xx)| (KDL-40V58xx)| (KDL-37V58xx)| (KDL- 32V58xx)
Top| 126.2 x 82.3 x 11.5 cm| 112.3 x 72.5 x 9.6 cm| 98.7 x 63.8 x 9.3 cm| 91.7 x 60.2 x 9.1 cm| 79.8 x 53.7 x 8.9 cm
Stand| (KDL-52W58xx)| (KDL-46W58xx)| (KDL-40W58xx)| (KDL-37W58xx)| (KDL- 32W58xx)
Mass (Approx.)
with| 35.0 kg (KDL-| 27.0 kg (KDL-| 20.5 kg (KDL-| 18.0 kg (KDL-| 14.5 kg (KDL-
Table-| 52V58xx)| 46V58xx)| 40V58xx)| 37V58xx)| 32V58xx)
Top| 35.5 kg (KDL-| 27.5 kg (KDL-| 21.0 kg (KDL-| 18.5 kg (KDL-| 15.0 kg (KDL-
Stand| 52W58xx)| 46W58xx)| 40W58xx)| 37W58xx)| 32W58xx)
without| 30.5 kg (KDL-| 23.5 kg (KDL-| 17.5 kg (KDL-| 15.0 kg (KDL-| 12.0 kg (KDL-
Table-| 52V58xx)| 46V58xx)| 40V58xx)| 37V58xx)| 32V58xx)
Top| 31.0 kg (KDL-| 24.0 kg (KDL-| 18.0 kg (KDL-| 15.5 kg (KDL-| 12.5 kg (KDL-
Stand| 52W58xx)| 46W58xx)| 40W58xx)| 37W58xx)| 32W58xx)

• 1 Specified standby power is reached after the TV finishes necessary internal processes.
• 2 4 hours a day and 365 days a year.
• Design and specifications are subject to change without notice.

PC input signal reference chart for PC and HDMI IN 1, 2, 3, 4

Resolution|

Horizontal frequency (kHz)

|

Vertical frequency (Hz)

|

Standard

---|---|---|---
Signals| Horizontal ×  Vertical

(Pixel) (Line)

• 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This affects the “Video Settings” menu and “Screen” menu settings.
  To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”.

  • This TV’s PC input does not support Sync on Green or Composite Sync.
  • This TV’s PC input does not support interlaced signals.
  • For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical frequency (boldfaced).

Troubleshooting

• Check whether the (standby) indicator is flashing in red.

When the (standby) indicator is flashing
The self-diagnosis function is activated.

1. Count how many times the (standby) indicator flashes between each two second break.
   For example, the indicator may flash three times, go off for two seconds, then flash again three times.

2. Press on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).

When the (standby) indicator is not flashing

1. Check the items in the tables below.
2. If the problem persists, have your TV serviced by qualified service personnel.

Condition Explanation/Solution

• Changes on the server are not being applied or displayed content differs from content on the server.
  Sometimes changes are not applied to displays on the TV even though content has been added and/or deleted on the server. If this happens, go back up one level and try opening the folder or server again.

• Photo, music and/or video files do not appear or icons are not displayed.

  • Preliminary Check

  • Check that the connected device supports DLNA.

  • Operations are not guaranteed for all servers. Also, operations differ depending on the features of the server and the content in question.

  • Turn the connected device on.

  • Check Connections
    Check that the LAN cable and/or mains lead/AC power cord of the server has not become disconnected.

  • Check Settings

  • Check that the connected device is registered under “Server Display Settings”.

  • Check that the server is correctly configured.

  • Check that the selected device is connected to the network and can be accessed.

  • If the “IP Address Settings” in “Network” under “Network Settings” is set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take some time to recognise devices if there is no DHCP server. Execute “Server Diagnostics”.

• The TV cannot be found from renderer-compatible device (the controller).

  • Check Connections
    Check that the LAN cable and/or mains lead of the server has not become disconnected.

  • Check Settings

  • Check if the “Renderer Function” is activated.

  • Check that the connected device is registered under “Renderer Access Control”.

• Only a few icons appear under the “Network” in the Home Menu.
  This is normal when internet connection is not available.
  You can use three pre-installed Widgets properly. To enjoy more Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*)

• You have been using registered Widgets, but now some contents won’t appear on the Widgets.

  • Check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*)
  • There’s a possibility that the Widget Provider’s server is out of service. Please try using the Widget later.
  • (*) Your router/modem must be properly set to connect to the internet in advance. Please contact your Internet Service Provider for the router/modem settings.

General

• Auto Setup (freesat) is stopped before it is completed.
  • Check connections and dish alignment. The dish needs to be pointing at Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East.
  • If the problem persists, consult your freesat registered retailer or call Freesat (UK) Ltd on 0844 881 6700 or visit www.freesat.co.uk.
• Some programmes cannot be tuned.
  • Check the aerial or dish.
  • The satellite cable might be short-circuited or there might be connection problems of the cable. Please check the cable and connection and then turn the TV Off with the Mains power On / Off switch, and turn it On again.
  • The frequency you entered is out of range. Please consult the received satellite broadcasting company.
• Distorted picture and/or sound.
  • Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment.
  • When installing optional equipment, leave some space between the optional equipment and the TV.
  • Check the aerial/cable connection.
  • Keep the aerial/cable TV cable away from other connecting cables.

Condition Explanation/Solution

• The TV turns off automatically (the TV enters standby mode).

  • Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of “On Timer”.
  • Check if the “Idle TV Standby” is activated.
  • If no signal is received and no operation is performed in the TV mode for 30 minutes, the TV automatically switches to standby mode.

• The TV turns on automatically.
  Check if the “On Timer” is activated.

• Some input sources cannot be selected.
  Select “AV Preset” and cancel the “Skip” setting for the input source.

• The remote does not function.
  Replace the batteries.

• HDMI equipment does not appear on “HDMI Device List”.
  Check that your equipment is compatible with Control for HDMI.

• You cannot select “Off” in “Control for HDMI”.
  If you have connected any audio system that is compatible with Control for HDMI, you cannot select “Off” in this menu. If you want to change the audio output to the TV speaker, select “TV Speaker” in the “Speaker” menu.

• Not all channels are tuned for cable.
  Check the support website for cable provide information. http://support.sony- europe.com/TV/DVBC/

Keep this Instruction manual safe you’ll need it

• Television in the UK is going digital, bringing us all more.
• Please see overleaf to find out when your area switches to digital.
• Digital UK is the independent, non-profit organisation leading the process of digital TV switchover in the UK. Digital UK provides impartial information on what people need to do to prepare for the move to digital, and when they need to do it.

How the switchover affects your TV equipment:

• Your new TV has a digital tuner built in, which means it is ready to receive the Free view signal by simply plugging it into your aerial socket (check if you can get digital TV through your aerial now, or whether you’ll have to wait until switchover, at www.digitaluk.co.uk ).
• When the TV switchover happens in your area, there are at least two occasions when you will need to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up new ones. Digital UK, the body leading the digital TV switchover, will advise you when you need to re-tune during the switchover.

How to re-tune:

• If you are missing any channels, it may be that they are not available in your area, or that your aerial needs upgrading.
• If you have any questions, please contact Sony on 08705 111 999 or call Digital UK on 0845 6 50 50 50 or visit www.digitaluk.co.uk

When does switchover happen?
*Copeland switches on October 17, 2007
The exact date you switch depends on the transmitter you are served by. To check when you switch, go to Digital UK’s postcode checker on www.digitaluk.co.uk Check your ITV news service or look at Teletext page 106 to see what TV region you’re in.

†Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends. Rates may vary for calls from non-BT lines.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>