LeoVince 14446EU LV One EVO Slip On Exhaust Instruction Manual

: September 29, 2024
: LeoVince

Table of Contents

LeoVince 14446EU LV One EVO Slip On Exhaust
LIST OF COMPONENTS
FITTING INSTRUCTION
INSTALLATION:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LeoVince 14446EU LV One EVO Slip On Exhaust

LIST OF COMPONENTS

| | |
---|---|---|---
| | STAINLESS STEEL| BLACK EDITION
Muffler| P/N:| 308424481U| 3014446485U
Linkpipe| P/N:| 3014446202| 3014446202
Carbon clamp| P/N:| 306960505| 306960505
Bracket| P/N:| 3014446561| 3014446561
Fitting kit| P/N:| 3014446601| 3014446601
| | |
PESO – WEIGHT – POIDS – GEWICHT – PESO (Kg)

ORIGINALE / STOCK / ORIGINE / ORIGINAL / GENUINO| 6,30

LeoVince

| STAINLESS STEEL| 3,20
BLACK EDITION| 3,20

ART14446EU – SPARE PARTS

ART. 14446EBU

FITTING INSTRUCTION

LIST OF SUPPLIED PARTS:
Refer to the list of components and the product drawing included in this booklet.

WARNING : before carrying out any work on the exhaust, check that its surface has cooled so that it will not damage components, which are not heat- resistant (such as fairing, hoses, rubber sleeves, etc. ) , or the operator.

INSTALLATION:

If necessary, use a rubber mallet to tap the connection pipes into place.
We suggest the fitting to be made by professionals. reference pictures [[ from – to ]]

Remove the stock silencer/s.[[ 01 ]]
Remove the stock pipe/s.[[ 02 ]]
Check that all mating surfaces are clean and in good conditions.
Install the bracket/s to the frame. [[ 03 ]]
Connect the LeoVince pipe/s to the stock pipe/s.[[ 04 ]]
Fit the clamp/s to the LeoVince silencer(s) . [[ 05 ]]
Install the LeoVince muffler/s. [[ 05 ]]
Link the parts together with the supplied spring/s or clamp/s.[[ 07 – 08 ]]
Check the right alignement.
Check all the tightenings.
Start the engine, wait a few minutes until it reaches operating temperature, and check that there are no gas leaks.

IMPORTANT:
During the first km of running, the exhaust system needs breaking-in; therefore, slight gas leakage might occur. After approximately 100 Km, check all the fasteners. It is normal for some white smoke to appear the first time you use the exhaust, even after switching off the engine.

ADJUSTMENT:
This silencer has been developed by Leovince on an electronic dynamometer using a vehicle in perfect condition, and in standard trim

MAINTENANCE :
From time to time, check all the brackets and fasteners, which could be affected by use (sound-deadening material, seals and other rubber parts) and replace them periodically. The silencer may be cleaned using gasoline, diesel oil or alcohol. Absolutely avoid the use of any kind of solvent. It is normal for there to be some discolouration of the silencer, which is the result of heat and the nature of the materials used.

IT IS FORBIDDEN TO MODIFY SILENCERS. Whatever form this may take, Belgrove Sp. z o. o. declines any responsibility for defects, problems, or malfunction, arising from the use of any product which has been modified or tampered with. BELGROVE SP. Z O. O. DECLINES ANY RESPONSIBILITY for defects, problems, or malfunction, arising from the use of any product which has been modified or tampered with.