JLAB Open Sport Open Ear Wireless Earbuds User Manual

: June 4, 2024
: JLab

Table of Contents

JLAB Open Sport Open Ear Wireless Earbuds
PAIR UP
- GO AHEAD, PRESS THE BUTTON
FITTING WITH FRAMES
- FITTING WITH HOOKS
GET CHARGED (EARBUDS)
MULTIPOINT (connect 2 devices simultaneously)
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JLAB Open Sport Open Ear Wireless Earbuds

We love that you are rocking JLab!
We take pride in our products and fully stand behind them.

YOUR WARRANTY
All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

CONTACT US
Reach out to us at support@jlab.com
or visit jlab.com/contact

REGISTER TODAY
jlab.com/register
Product updates | How-to tips FAQs & more

PAIR UP

Take out of the case and remove stickers. Place them back in the case.
Blue lights on case indicates charging. Remove earbuds from case.
One will blink blue/white indicating ready to pair to your device. Select “JLab Open Sport” in your device’s Bluetooth settings.

ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device.
Earbuds will automatically enter Bluetooth Pairing.
Select “JLab Open Sport” in new device settings to connect.

GO AHEAD, PRESS THE BUTTON

CUSTOM EQ SOUND MODES
Tap either the right or left earbud 3 times for different EQ settings (Open Sport will cycle 2 EQ settings).

JLab SIGNATURE
JLab C3™ signature sound with amplified bass and vocals

BALANCED
Even sound with no additional enhancements

FITTING WITH FRAMES

Slide ear hooks sideways to remove.
Remove the clips from the bottom of the charging case and slide on each Open Sport.
Slip over frames and adjust the clip tension by pinching in while on frames.
While wearing, move Open Sport closest to ear for best performance.

FITTING WITH HOOKS

Bend and form the hook to desired preference.
Place hook behind ear and move back toward ear.
Rotate and adjust for best fi

GET CHARGED (EARBUDS)

Placing in the charging case will auto power OFF and start charging.
Blue lights will indicate earbuds are charging and will turn OFF when fully charged.

Removing the earbuds will auto-power ON and connect to last device.

GET CHARGED (CASE)
Connect included USB-C cable to charge.

LEDs pulse white when charging and turn solid white when fully charged.

GET CHARGED (CASE)
Connect included USB-C cable to charge.
LEDs pulse white when charging and turn solid white when fully charged.

MULTIPOINT (connect 2 devices simultaneously)

Once FIRST device is connected, turn off Bluetooth in device settings. JLab Open Sport will auto enter Bluetooth Pairing.
Enter your SECOND device Bluetooth settings and connect to JLab Open Sport.
Enter your FIRST device Bluetooth settings. Turn on Bluetooth and connect to JLab Open Sport.

TROUBLESHOOTING

NO AUDIO IN ONE EARBUD OR EARBUDS DISCONNECTED (MANUAL RESET)

Keep earbuds in the charging case and forget “JLab Open Sport” in your Bluetooth device settings.
Quick tap 7x on one earbud in charging case.
Quick tap 7x on other earbud in charging case.
Take both earbuds out of the charging case. One earbud will blink blue/white indicating ready to pair to your device.

Instructional videos at: JLAB.COM/MANUALS

CAUTIONS

Avoid extreme heat, cold, and humidity.
Avoid dropping or crushing the earbuds.
Wax may build up in the earbud tips, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
If you experience regular discomfort while using this product, discontinue use and consult your physician.
We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.