LeoVince 15242 Slip-On Exhaust Instruction Manual
- June 10, 2024
- LeoVince
Table of Contents
LeoVince 15242 Slip-On Exhaust Instruction Manual
- Muffler
- Link pipe
- Fitting kit
STAINLESS S.: BLACK
cod. 309746481: cod. 309746485
cod. 3015242201: cod. 3015242201
cod. 3015242601: cod. 301524260
FITTING INSTRUCTION
LIST OF SUPPLIED PARTS:
Refer to the list of components and the product drawing included in this
booklet.
WARNING:
before carrying out any work on the exhaust, check that its surface has cooled
so that
it will not damage components, which are not heat-resistant (such as fairing,
hoses,
rubber sleeves, etc.), or the operator.
INSTALLATION
- Remove the OE silencer.
- Check that the mating surfaces are in good clean condition, slide the link pipe on to the original header, taking care not to damage the graphite bushing (if supplied) which should replace the OE bushing. Partially tighten the securing strap to allow a degree of further adjustment.
- Slide the Leovince silencer onto the link pipe, check the alignment of the mounting eyes for the springs and the alignment of the exhaust outlet to the rear of the silencer, and then link the parts together with the springs provided
- Mount spacers, washers and brackets (if any) as shown on the drawing and then secure by tightening nuts and bolts.
ART.15242B – SPARE PARTS
HUSQVARNA SVARTPILEN / VITPILEN 125 / 401
A FITTING KIT cod.3015242601R
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>